Motors Mexico (KMM) will start production of the all-new 2019 Forte at the Pesqueria plant in July, and ship to dealer showrooms across the U.S. starting in August. The vehicle will be powered by a 2.0-liter engine that produces 147 hp and 132 lb-ft of torque, have a more aggressive and aerodynamic design, and be equipped with a reversing camera, parking sensors, cross traffic alert, blind spot detection, ABS brakes and a stability control system...

OEM Plants  Updated at: 2025/06/14

ctional characteristics of the two vehicles rather than obvious styling changes. The list of changes includes:   •    Up to 410 miles of range on the Model S Long Range    •    Quieter inside with less wind and road noise, more effective Active Noise Cancellation   •    New wheel designs & improved aerodynamics for more range   •    Front fascia camera for better visibility   •    Dynamic ambient lighting with anima...

News  Updated at: 2025/06/14

o the current NMC3 batteries. The new NMC4 batteries will be used in the eCitaro, eCitaro G, and eCitaro K models from 2026. It is developed by BMZ Poland, these batteries use prismatic cells instead of cylindrical ones. Each battery pack includes 12-cell modules, with 15 modules in total. The pack design remains the same as NMC3, making it compatible with current eCitaro models—even for retrofitting. Thanks to a different cell chemistry, NMC4 ...

News  Updated at: 2025/06/13

ient 1.5L inline 3-cylinder engine (M15A-FXE), a compact and lightweight transaxle with enhanced motor output, and a high-output bipolar NiMH battery. It measures 4,190mm long, 1,825mm wide, 1,560mm high, with a wheelbase of 2,580mm. The exterior features Lexus' latest "Unified Spindle" front facia design. On August 30, Toyota Motor Corporation resumed operations at 28 lines in all 14 plants for finished vehicles in Japan. Of the 28 lines in 14 p...

OEM Plants  Updated at: 2025/06/13

production volume for November to be approximately 800,000 units Toyota Motor Corporation announced on September 17 that it will continue to sell the "Corolla Axio" and the "Corolla Fielder" even after the introduction of new models. On the same day, Toyota announced the launch of the completely redesigned and renamed "Corolla" and "Corolla Touring" but Toyota will continue to sell the current  models to meet a wide range of needs. The "Corolla...

OEM Plants  Updated at: 2025/06/13

Toyota Motor East Japan, Higashi Fuji Integration Center (Shizuoka) Toyota East Japan's R&D location, responsible for vehicle development including planning, styling, design, and evaluation - Toyota Group's three companies, Kanto Auto Works, Ltd., Central Motor Co., Ltd., and Toyota Motor Tohoku Corporation, were merged to form a new company Toyota Motor East Japan, Inc. in July 2012. - Kanto Auto Works, Ltd.'s Higashi Fuji Integration Center w...

OEM Plants  Updated at: 2025/06/13

s production plants in Japan on October 23. On May 10 Toyota Motor Hokkaido started production of a Direct Shift-CVT called the K120. The K120 is a new type of CVT that pursues a balance between excellent driving performance and high environmental performance through implementation of Toyota's TNGA design principles. By adopting a new start gear, the transmission efficiency in the low speed range has been greatly improved compared to conventional...

OEM Plants  Updated at: 2025/06/13

ards. The plant continues local production of flagship models such as the Mercedes-Benz Axor Trucks (2528 CH, 4928 T, 4028 T, 4023 T, 2528 RMC, 2528 CX, 2528 C) and Mercedes-Benz bus chassis (OH 1626 L and OH 1626 S), tailored for the Indonesian market. Sustainability is central to the facility’s design, with energy-saving systems, modern waste management, and green spaces developed using the Miyawaki method...

OEM Plants  Updated at: 2025/06/13

FAW Toyota launches bZ5 electric coupe SUV On June 10, FAW Toyota launched the bZ5 midsize battery electric coupe SUV. The model is available in four variants, with prices ranging from CNY 129,800 to CNY 159,800. It is the first new model developed by FAW Toyota’s China team and a starting model under Toyota’s localization strategy. Adopting a stereoscopic diamond-cutting exterior design, the bZ5 measures 4,780mm long, 1,866mm wide, and 1,510...

News  Updated at: 2025/06/13

i to renew paint shop in Neckarsulm plant by 2025 Audi uses virtual assembly planning in smart production Audi revolutionizes factory automation Audi concludes fundamental agreement with Works Council on economic and forward-looking realignment Audi demonstrating 3D printing expertise with in-house design software in Neckarsulm Audi production gradually restarts in Europe Audi Aluminium Closed Loop established in Ingolstadt plant since beginning ...

OEM Plants  Updated at: 2025/06/13

2011. GM started deliveries of the "Chevrolet Volt." Bidding for the first production car of the Volt, which ended December 14, resulted in a bidding of $225,000. A total of 45 cars were shipped to New York and Washington D.C. on December 13. Within the week 160 cars will be delivered to the first designated sales areas. The "Chevrolet Volt" was named the "2011 North American Car of the Year." GM will raise its production plan for 2011 from 10,0...

OEM Plants  Updated at: 2025/06/13

00 vehicles. To further strengthen the cooperation, BJEV will forge an alliance with Huawei Device Co., Ltd. on the basis of the existing strategic partnership with Huawei Technologies Co., Ltd. The first model co-developed by two parties is positioned as a premium smart electric sedan. To meet the design and production requirements of the new model, BJEV will upgrade the existing BE22 platform in an all-round way to create a new-generation premi...

OEM Plants  Updated at: 2025/06/13

Defender (Slovakia) MX-30 Model Y (USA) Hummer EV (USA) Shine (China) 218i Gran Coupe (Germany) iMAX8 (FF) (China) RX5 MAX (FF) (China) RX5 PLUS (FF) (China) RX3 (FF) (China) RX5 eMAX (China) XC60 T8 Polestar Engineered (Sweden) XC60 Recharge Plug-in hybrid T8 AWD Inscription (Sweden) XC60 B6 AWD R-Design (Sweden) XC60 B5 AWD Inscription (Sweden) S60 T8 Polestar Engineered (USA) V60 T8 Polestar Engineered (Sweden) V60 Recharge Plug-in hybrid T6 A...

Who Supplies Whom  Updated at: 2025/06/13

trims: Sport and Flagship. The Sport version delivers 310 hp and accelerates from 0 to 100 km/h in 6 seconds, while the Flagship boosts output to 637 hp, reaching 100 km/h in 3.6 seconds. Both variants are equipped with a 100 kWh CATL battery, offering up to 615 km of range and AWD capability. The design features 21-inch wheels, a sleek silhouette, and a high-tech interior with a 16” central display, a 36.2” head-up display, and a 21-speaker...

News  Updated at: 2025/06/13

BADER de Mexico S. en C. por A. de C.V. - Delta Mexico -Shareholder(s): Bader Group Other seat parts Door trim Shift lever parts Steering wheel parts Instrument panel parts Other interior parts Design cut and sewing of leather parts for interiors ISO14001 ISO9001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2025/06/13

ia) Gloster (India) Amaze (India) Civic (India) BR-V (India) WR-V (India) CR-V (India) mu-X (India) D-Max (India) GO (India) GO+ (India) redi-GO (India) Twingo Electric (Slovenia) XC40 Recharge Pure Electric (Belgium) X5 xDrive45e (USA) Traveller (India) Intra (India) Ace Gold (India) GT-R50 by Italdesign Ray EV (Korea) Senat (Russia) Sonata (Korea) Corvette Stingray (USA) Elise Sport 220 Ⅱ (UK) Touran (Germany) GLE 63 S 4MATIC+ (USA) Portofino...

Who Supplies Whom  Updated at: 2025/06/13

. The plant's initial production capacity of 114,000 vehicles has been increased to its full capacity of  300,000 vehicles per annum. On August 7, Hyundai unveiled the images and the overview of the New Generation i10 for the European market at the Frankfurt Motor Show. New Generation i10 has been designed and developed at the Hyundai Motor Europe Technical Centre in Rüsselsheim, Germany and will be produced at Izmit plant in Turkey starting in...

OEM Plants  Updated at: 2025/06/12

g NVIDIA Omniverse, BMW can run real-time simulations to fine-tune layouts, robots, and logistics. The system is also adding AI tools and assistants for smarter planning. Every new model must fit smoothly into the assembly line. The Virtual Factory now runs automated digital collision checks, using design data and 3D scans to ensure cars don’t hit anything while moving through the line. What used to take four weeks now takes three days. BMW’s...

News  Updated at: 2025/06/12

nce and advanced power architectures in custom silicon platforms built on a scalable, open foundation. Customers can build advanced solutions that are easy to program using MIPS advanced processor IP, based on the open RISC-V instruction set architecture, combined with Cyient power and mixed-signal design expertise. Based on Cyient Semiconductors Private Limited press release ...

News  Updated at: 2025/06/12

riving suite, including a MicroFiber capacitance steering wheel, advanced driving chip, and single-pixel Lofic architecture for accurate, clearer, and longer-range perception for enhanced safety and control. The new XPENG G6 boasts a completely re-imagined interior. The new Super Star-Ring Interior Design has transformed 60% of the cabin, introducing a sleek new dashboard, ambient lighting, and a new capacitive steering wheel.  Based on XPENG pr...

News  Updated at: 2025/06/12