door 2nd panel glass Back door glass Back door glass (UV-cut) Back door window glass Backlite glass assembly C-pillar glass Cowl windshield Dimmable glass Dimmable rear door quarter window glass Dimmable rear door window glass Dimmable rear quarter window glass Dimmable sunroof glass Direct glazing adhesive Door glass assembly Door window glass Door window glass plug FFX Front side window glass Front and rear door window Front and rear windshiel...

Who Supplies Whom  Updated at: 2026/06/18

type distributed winding) as the MG2.   The insulation at the winding welds uses resin molding rather than conventional powder coating, as seen in the bZ4X and other models, and the coil end size has been reduced by shortening the insulation overlap.   For the stator slot insulation paper, foamed adhesive insulating paper is used, reducing its thickness by half and improving the space utilization ratio by 3.2%.   The power module mounted in th...

Market & Tech Reports  Updated at: 2026/06/15

tion is scheduled to begin in 2027. On-board air heaters equipped with PTC technology offer multi-zone functionality, allowing for individual temperature control of up to four internal zones. The output range will be 3 to 8kW. Its unique self-regulating system reliably prevents overheating, and its adhesive-free construction minimizes the risk of unwanted emissions in the cabin. It will be available in Asia, Europe, and North America starting in ...

Market & Tech Reports  Updated at: 2026/06/12

Evonik Industries AG Germany Adhesive ...

Search Suppliers  Updated at: 2026/06/12

Wanhua Chemical Group Co., Ltd. China Vibration / Acoustic insulator Thermoplastic polyurethanes (TPU) Polymethly methacrylate (PMMA) Polycarbonate (PC) Compounding plastics modified isosynate Polyether Formulated polyols Polymer polyols Silicone electronic adhesive ISO14001 ISO9001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2026/06/10

, and through integrated molding, the number of weld points has been reduced by 96% and the number of processes by 35%, thereby increasing production efficiency. The stator is based on an oil-cooled design and achieves a power density of 14kW/kg by utilizing 0.25 mm silicon steel sheets and in-mold adhesive iron core technology. The rotor employs an S-shaped four-circuit iron core direct cooling design, and the magnet temperature is reduced by th...

Market & Tech Reports  Updated at: 2026/06/09

Oji Tac Co., Ltd. Japan -Shareholder(s): Oji Holdings Corporation 100% Tape Film Adhesive ...

Search Suppliers  Updated at: 2026/06/09

Teraoka Seisakusho Co., Ltd. Japan Tape Adhesive Adhesive tape Double-stick tape Electrical insulation tape Radio wave shields tape Obctrostatic removal tape ISO14001 ISO9001...

Search Suppliers  Updated at: 2026/06/09

Cangzhou Yongda Hardware Manufacturing Co., Ltd. China Terminal Clamp Various stampings Coil Cooling fan Various machining Radiator fan motor Adhesive Alternator fan blade Alternator stator core IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2026/06/09

r battery separator coating, its Kynar Flex LBG 2600 offers improved manufacturing efficiency, allowing for lower temperature assembly. Arkema also introduced Incellion Sp 1252, an acrylic binder designed specifically for ceramic-coated separators, and Incellion Sp 450, a co-binder for PVDF for the adhesive layer. For electrical insulation, its Zenimid polyimides deliver exceptional thermal resistance and dielectric strength, supporting FPCB appl...

News  Updated at: 2026/06/08

surface material for vehicle interiors. Under the acronym LOVR – the letters stand for leather-free, oil-free, vegan and residue-based – the teams are developing a bio-based leather alternative that is made entirely from residues from the regional hemp industry. The hemp fibers and a bio-based adhesive are combined using a special technology and processed to become a high-quality, truly circular surface material. At the end of its service li...

Market & Tech Reports  Updated at: 2026/06/05

ALTECO Co., Ltd. Japan Adhesive Instant Adhesives Epoxy Adhesives ISO9001...

Search Suppliers  Updated at: 2026/06/04

lindrical cell holder SunForce cooling plate insulator LASTAN sheets with application examples LEONA - XYRON multilayer pipes/LEONA PA612 resin for monolayer XYRON LIB cell spacer XYRON 12 V battery case LEONA busbar cover material Celgard membrane separators Lastan Flame Resistant Fiber Sheet tesa Adhesive tape Formation tray LEONA SN Series Busbar Cover/ Connector Inter-Cell Spacers Coolant Tubes Top Cover / Compression Pads End Plates Soundpro...

Search Suppliers  Updated at: 2026/06/04

ad bolt 2nd row seat screw 2nd row seat slider screw 3rd row seat bolt A pillar trim clip A/C compressor bolt A/C compressor screw A/C condenser bolt A/C condenser screw A/C pipe and hose bolt A/C pipe bolt ABS module bolt AC clamp Acceleration sensor bolt Acoustic insulator nut Active spoiler bolt Adhesive Adhesive tape Aero undershield fastener Aerodynamic under tray fastener Air duct rivet Air induction seal Air inlet duct seal Air intake perf...

Who Supplies Whom  Updated at: 2026/06/02

Eguchi Iwao Co., Ltd. Japan Paint coating Seal Adhesive ISO14001 ...

Search Suppliers  Updated at: 2026/05/26

Explanation of joining technology When the molten resin injected from the injection molding machine comes into contact with the surface of the metal component modified by the surface treatment, the metal component and the resin are chemically bonded to each other to be strongly bonded. (Do not use adhesive.) ISO14001 ISO9001...

Search Suppliers  Updated at: 2026/05/25

Yamasaki Union Co., Ltd. Japan Tape Film Adhesive Metal foil film Insulating paper Adhesive tape Sponge rubber Electromagnetic shield ISO14001 ISO9001...

Search Suppliers  Updated at: 2026/05/25

, Dongfeng Honda, GAC Honda, GAC Automobile, Changan Mazda, SAIC GM , SAIC, FAW Car, etc. ISO9001、IATF16949、ISO14001 R&D Facilities R&D Facilities Details NVH and Sealing Technology Center Powertrain NVH solutions and simultaneous development, flutter-free seal manufacturing technology, adhesive formulation development, die design and manufacturing Piston Ring & Powdered Metal Technology Center Diamond-like plating and piston ring t...

Major Suppliers  Updated at: 2026/05/24

ded. -Definition of plastic glazing shall be added, and it shall be made clear that parts made of plastic glazing shall not be exempted from the flammability test(, regarding a different series than above). AgreementregardingUN/ECEregulation 04 2021/27 2021/12/10 2021/9/30 Test requirements for adhesive agents shall be revised. 13 AdoptedproposalregardingUN/ECEregulation 125 02 2021/100 2021/11/24   The Forward Field of Vision Field of V...

Regulations  Updated at: 2026/05/22

PT.Tsuchiya Manufacturing Indonesia Indonesia -Shareholder: Tsuchiya Co., Ltd. Tape Adhesive Exterior decorative parts Plastic injection molding Motorcycle parts Automotive stripes and graphics Automotive caution plates ...

Search Suppliers  Updated at: 2026/05/21