lease a reskined version of the CR-Z sports hybrid vehicle (HV) in October 2015. The all-new Honda CR-Z will come with newly-designed front, rear and side panels. It also gets a wider rear tread, newly-tuned suspensions and higher brake performance and resulting improved stability at high-speed and winding driving. The CR-Z is produced at Honda's Suzuka Factory. Honda Motor Co., Ltd. announced on July 18, 2019, a plan to unveil the all-new the N-...

OEM Plants  Updated at: 2026/05/21

Bosch secures large-volume e-motor order from Mercedes-Benz Robert Bosch GmbH (Bosch) has secured a major new order to supply electric motors for Mercedes-Benz’s next generation of electric powertrains into the 2030s. Bosch’s electric motors offer up to 98% efficiency and increased power density. They feature new winding technology, innovative rotor oil cooling, and scalable platform architecture that supports different axle variants. Their c...

News  Updated at: 2026/05/20

Miyabi Co., Ltd. Japan -Group: IME Group Various Electrical / Electronic parts Assembly Coil Winding ISO9001...

Search Suppliers  Updated at: 2026/05/18

Ichinomiya denki Co., Ltd. Japan Paint coating Plastic injection molding Various machining Shaft Various motors Various sensors Assembly Angle sensor Various Electrical / Electronic parts Punching press processing Parts of motor [Iron core Winding Motor shaft Rotation angle sensor (Resolver)] IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2026/05/18

Ichinomiya Electronics Philippines Corporation Philippines -Shareholder(s): Ichinomiya denki Co., Ltd. Terminal Various sensors Assembly Coil Wire winding process ISO14001 IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2026/05/18

ki Akita, Mr. Taketoshi Akita, Mr. Jiravut Chit-suphap Motorcycle parts Various stampings Plastic injection molding Rotor parts for drive motor Other engine electrical parts Other steering parts Angle sensor Various Electrical / Electronic parts Press-cutting Electrical motor components Motor cores Winding processing ISO14001 IATF16949 (Formerly ISO/TS16949)...

Search Suppliers  Updated at: 2026/05/18

nt driving chip and a Qualcomm Snapdragon 8295 chipset; the SkyOS all-domain automotive operating system; and the Aquila super sensing system. On September 20, NIO launched the all-new ES8 large battery electric SUV. The all-new ES8 is equipped with an intelligent 4WD layout, a 925V continuous wave winding motor, delivering a maximum total power of 520kW and a peak total torque of 700Nm. The all-new ES8 comes with: the Cedar ADAM central computin...

OEM Plants  Updated at: 2026/05/18

PT. Sumitomo Electric Wintec Indonesia Indonesia - Shareholder: Sumitomo Electric Wintec, Inc. Coil Winding (Application: Ignition coil Starter coil Choke coil Drive motor coil etc.) ISO14001 IATF16949 (Formerly ISO/TS16949) ISO9001...

Search Suppliers  Updated at: 2026/05/15

Cybertruck there in 2023. Tesla will not start mass production of battery cells at its Gigafactory Berlin before 2024, according to reports citing people familiar with the matter. While research on battery electrodes continues at the German site, all equipment for the remaining production steps of winding, assembling and formatting the cells is being moved to Gigafactory Texas. Tesla wants to focus on successfully deploying its dry coating of th...

OEM Plants  Updated at: 2026/05/13

or sustainable and highly automated driving commercial vehicles (CV) at IAA Transportation 2024. IAA Transportation will be the first major show at which the Company and Vitesco have combined to present their products. The solutions to be presented include permanent-magnet electric motors with wave winding technology providing over 200 kW of continuous output, fuel cell stacks with graphite and metal bipolar plates and a maximum output of 140 kW,...

Major Suppliers  Updated at: 2026/05/11

PT. Patco Elektronik Teknologi Indonesia -Shareholders: PT. Mitra Raharja Sejahtera , PT. Senjaya Bersama Utama , Carmel Mountain Pte. Ltd. (Singapore) Plastic injection molding Coil Assembly Various Electrical / Electronic parts Various stampings Coil Winding ISO14001 ISO9001...

Search Suppliers  Updated at: 2026/05/11

., Ltd. (Intelligent Power) and VOYAH Automobile Technology Co., Ltd. (VOYAH Automobile). The project lasted for two years, has 69 patented inventions, and went through a total of 100,000 hours of durability tests. This electric drive assembly adopts deep integrated design technology, using 8-layer winding flat wire technology. It is equipped with an independent S3+ power module (IGBT). Developed in-house by Dongfeng Motor, it has a silent reduct...

OEM Plants  Updated at: 2026/05/11

ficially launched the new IM LS7 mid-to-large-sized battery electric SUV. A 77kWh RWD model will also be launched, with pre-orders and deliveries expected in H2 2023. For the powertrain, the vehicle features a magnesium-aluminum alloy motor (with waterfall oil cooling and 8-layer Hair-Pin flat wire winding technologies), resulting in a maximum power of 250kW and a peak torque of 475Nm for the RWD models and a maximum power of 425kW (175kW in the ...

OEM Plants  Updated at: 2026/05/07

hich uses a non-magnetic bridge design to enhance efficiency and torque density while reducing energy losses and minimizing reliance on rare-earth materials. The second patent covers a Fault-Tolerant Five-Phase Interior Permanent Magnet Motor (PMSM) with dual inverter control, featuring an open-end winding configuration that enables switching between star mode for optimized startup efficiency and delta mode for high torque demand. The system can ...

News  Updated at: 2026/04/30

s. As the two plants can no longer fulfill market demand with their capacities given the launch of new models, NIO is not facing overcapacity. On September 20, NIO launched the all-new ES8 large battery electric SUV. The all-new ES8 is equipped with an intelligent 4WD layout, a 925V continuous wave winding motor, delivering a maximum total power of 520kW and a peak total torque of 700Nm. The all-new ES8 comes with: the Cedar ADAM central computin...

OEM Plants  Updated at: 2026/04/29

PT. Mitsuyoshi Manufacturing Indonesia Indonesia -Shareholder(s): J's Factory Inc. Leather / Fabric Assembly Insert molding Plastic injection molding Paint coating Speaker Car audio parts Speaker net Front grill High frequency welding Insert molding Leather winding processing Cross lamination processing Sewing processing ISO14001 ISO9001...

Search Suppliers  Updated at: 2026/04/27

tents in the parking lot. Tesla will not start mass production of battery cells at its Gigafactory Berlin before 2024, according to reports citing people familiar with the matter. While research on battery electrodes continues at the German site, all equipment for the remaining production steps of winding, assembling and formatting the cells is being moved to Gigafactory Texas. Tesla wants to focus on successfully deploying its dry coating of th...

OEM Plants  Updated at: 2026/04/24

motors into three kinds. The company now has three types of drive motors in the same shape but with three different diameters to match different outputs for 110kW, 70kW and 40kW. These motors can also meet subtle output requirements by changing their thickness on a motor axis side and by adjusting winding amount. The company will develop three or four kinds of inverters as well to match different allowable current capacity. The company can respo...

Major Suppliers  Updated at: 2026/04/22

h the return to operations, the plant will begin serial production of the new Peugeot 208. The official launch of the new 208 is scheduled for August. From El Palomar, the new Peugeot will be exported to Brazil, Uruguay and other markets. It will not coexist with the Brazilian 208, which is already winding down production in Porto Real, Brazil. On August 21, Groupe PSA announced it has recently begun exporting its new Peugeot 208 to Brazil in pre...

OEM Plants  Updated at: 2026/04/21

., Ltd. (Intelligent Power) and VOYAH Automobile Technology Co., Ltd. (VOYAH Automobile). The project lasted for two years, has 69 patented inventions, and went through a total of 100,000 hours of durability tests. This electric drive assembly adopts deep integrated design technology, using 8-layer winding flat wire technology. It is equipped with an independent S3+ power module (IGBT). Developed in-house by Dongfeng Motor, it has a silent reduct...

OEM Plants  Updated at: 2026/04/20