ont intelligent signal display (ISD) lamp Rear intelligent signal display (ISD) lamp LED-Control unit LED daytime running light Left front repeater camera lamp assembly Smart lamp Exterior interaction lamp Front turn signal lamp housing Rear indicator lamp Side intelligent signal display (ISD) lamp Thermally conductive plastic materials Hyperite HP for front LED clearance lamp socket Backup lamp Engineering resin Hyperite for front LED clearance ...

Who Supplies Whom  Updated at: 2025/12/22

t (Sourced by Automobilwoche) LED brake light Rear lamp housing Tail lamp assembly Rear lamp side bracket Adapter rear combination lamp LED for rear lamp Rear combination lamp assembly Rear lamp assembly Rear lamp ballast Intelligent signal display (ISD) rear lamp LED rear lamp bulb LED rear lights Thermally conductive plastic materials Hyperite HP for rear lamp socket Engineering resin Hyperite for rear lamp socket Tail & stop lamp All LED taill...

Who Supplies Whom  Updated at: 2025/12/22

n process, starting with 650V. “We are on track to begin providing samples to customers in the first half of 2026, and scale rapidly to volume production,” said Dinesh Ramanathan, onsemi Senior Vice President of Corporate Strategy, onsemi. onsemi will pair its silicon drivers, controllers, and thermally enhanced packages with GF’s 650V GaN technology platform to deliver optimized GaN devices with higher power density and efficiency. These ...

News  Updated at: 2025/12/20

onductivity of 3W/m·K and a volumetric resistivity of 2×1013Ω・cm, and because it is clay-like, it can be placed in close contact with heat-generating objects such as electronic components for efficient heat dissipation.   There was also an exhibit comparing the heat dissipation performance of thermally conductive clay and thermally conductive sheets, which claimed to produce a "temperature difference of up to 3°C in the heating element tem...

Market & Tech Reports  Updated at: 2025/12/17

and power IC. -Example: Used for pressure sensor Electro conductive film -Possible to display information in all area of the windshield -Compact projection system Future of Foam Air duct -Soundproof -Thermal insulation -Light weight High mechanical properties and extremely light weight products Thermally conductive injection molding, lightweight and EMC solution IMD, flexible heat dissipation foam, flame retardant acrylic tape Functional re...

Search Suppliers  Updated at: 2025/12/16

heelbase of 2,690 mm. The PHV and 2.4-liter turbocharged engine models are available with AWD, while the hybrid (HV) and 2.5-liter naturally aspirated engine models are available with AWD or FWD systems, for a total of six different powertrain options. The plug-in hybrid system consists of a highly thermally efficient 2.5L inline four-cylinder engine, a high-capacity and high-output lithium-ion battery, and front and rear motors. The lithium-ion ...

OEM Plants  Updated at: 2025/12/09

heelbase of 2,690 mm. The PHV and 2.4-liter turbocharged engine models are available with AWD, while the hybrid (HV) and 2.5-liter naturally aspirated engine models are available with AWD or FWD systems, for a total of six different powertrain options. The plug-in hybrid system consists of a highly thermally efficient 2.5L inline four-cylinder engine, a high-capacity and high-output lithium-ion battery, and front and rear motors. The lithium-ion ...

OEM Plants  Updated at: 2025/12/09

n MTB Rocker PP2-DG high temperature silicone dielectric gels ExSil 100 Potting compounds Battery box made from FUNCSTER material Battery box made from GMT eFR material Battery box GMT and GMTex MAFTEC EV battery fire shield solution SF-MPG anode materials Lightweight advanced energy storage system Thermally conductive materials -Sensing technology/Adhesive material -Super Engineering Plastics Films (Superio UT) - Polymethyl methacr...

Search Suppliers  Updated at: 2025/12/09

a sensor for High Beam Control (HBC) system Head lamp unit for High Beam Control (HBC) system Throttle sensor Power steering ECU ESC actuator Brake hose Strut PS bearing Bush for shift-by-wire electric actuator Shift-by-wire electric actuator Polyester resin for A/C ventilator Intake manifold resin Thermally conductive plastic materials Hyperite HP for rear lamp socket Special molding compound for HV/EV motor (IPM) magnet fixing Printed wiring bo...

Who Supplies Whom  Updated at: 2025/12/08

e batteries. Qkera, for instance, a start-up at the Technical University of Munich, has developed new electrolyte components consisting of a lithium ion-conducting ceramic-oxide material that has achieved a 30 to 50 % higher energy density than conventional batteries. Solid-state electrolytes are thermally more stable and are less susceptible to thermal runaway, which can cause fires in lithium-ion batteries. They can withstand higher temperatu...

Market & Tech Reports  Updated at: 2025/12/05

Nagase & Co., Ltd. Japan -Chemicals trading firm Printed circuit board Anode materials / plates for lithium-ion battery Adhesive Light Detection And Ranging (LiDAR) Motor core for drive motor Cathode materials / plates for lithium-ion battery Film Heat insulator Nonwoven cloth LED Ultrasonic sonar Various Electrical / Electronic parts Other battery related parts Thermally Conductive Adhesive Cellulose Separator Electrical Insulation Film Current...

Search Suppliers  Updated at: 2025/11/18

Von Roll India Pvt Ltd. India -Shareholders: Von Roll Holding AG Thermal management system parts for EV Coil Other insulators Electric cable Enameled copper Wires Mica Products Resin potting The Battery Show India 2023 Copper wire Copper wire Thermally conductive potting material ...

Search Suppliers  Updated at: 2025/11/13

Henkel, Germany, launches new thermal potting solutions for electric vehicle components On November 7, Henkel presented Loctite SI 5643 and Loctite SI 5637. Both Loctite SI 5643 and Loctite SI 5637 are two-component, fast-curing, low viscosity thermally conductive silicone potting compounds for high-performance power electronics. These potting solutions are optimized for crucial EV power conversion components such as on-board chargers and inverte...

News  Updated at: 2025/11/10

heelbase of 2,690 mm. The PHV and 2.4-liter turbocharged engine models are available with AWD, while the hybrid (HV) and 2.5-liter naturally aspirated engine models are available with AWD or FWD systems, for a total of six different powertrain options. The plug-in hybrid system consists of a highly thermally efficient 2.5L inline four-cylinder engine, a high-capacity and high-output lithium-ion battery, and front and rear motors. The lithium-ion ...

OEM Plants  Updated at: 2025/11/04

ollowing a January 2023 contract for a full-BEV underbody protection skid plate, which entered serial production in 2024. (From a press release dated July 28, 2025) Kautex Textron GmbH & Co., KG (Kautex) is coordinating the newly launched RESiLiTE (Robust, Economical, Silicon-rich, Lightweight, and Thermally Efficient battery packs) project, co-funded by Horizon Europe with approximately EUR 6.2 million in support. This three-year project, which ...

Major Suppliers  Updated at: 2025/10/01

g mixed waste from end-of-life vehicles. The pilot project demonstrates the recyclability of high-performance plastics from automotive shredder residues (ASR) together with renewable raw materials.  This mixture of plastic, film, paint, and foam residues is so complex that it can currently only be thermally recycled. The pilot project shows that these automotive wastes can be recycled through gasification, a special type of chemical recycling, a...

News  Updated at: 2025/09/29

washers-Mechanical seals-Lip seals-Dust covers-Industrial rubber products-Phenolic resin molding materials-Polyurethane elastomer products-Vibration isolator and sound isolating products-High damping rubber (HDR)-Compressor valves-Special lubricants-Flexible circuits Products for Electric Vehicles-Thermally conductive compound "QLEASE" (Insulating thermal conductive resin)-Flame retardant rubber-Heater FPC-Heat Resistant FPC-High heat & high cur...

Major Suppliers  Updated at: 2025/09/25

EV" two-motor hybrid system that combines a newly developed 2.0L direct injection engine (maximum output 104kW, maximum torque 182Nm) and an advanced hybrid unit. The car will be produced at Saitama Manufacturing's finished vehicle plant, with monthly sales of 300 units targeted. In addition to the thermally efficient Atkinson cycle, the newly developed engine employs a direct injection system that injects fuel directly into the cylinder. This sy...

OEM Plants  Updated at: 2025/09/24

r-entrepreneurs, the truck features nine segment-first innovations. These include a 230 mm disc brake on an R13 wheel platform, a variable 34:1 gear ratio recirculating ball steering, a telescopic steering intermediate shaft for smoother steering, a battery pack with laser-welded battery modules on thermally conductive adhesive, and exceptionally bright headlights rated at over 60,000 candelas, etc. Based on the Euler Motors press release...

News  Updated at: 2025/09/22

Nexperia, Netherlands, launches new AEC-Q101 qualified 100 V MOSFETs On September 19, Nexperia launched its new AEC-Q101 qualified 100 V MOSFETs, in compact CCPAK1212 (12 x 12 mm) copper-clip packaging. These devices deliver ultra-low conduction losses with on-resistance (RDS(on)) as low as 0.99 mΩ, and enable safe current above 460 A.  This makes them ideally suited for thermally demanding 48 V automotive applications, including on-board charg...

News  Updated at: 2025/09/19