52.04 Private Investors 25.84 Institutional Investors 22.12 Total 100.0 Lightweight plastic components Cam covers for cars and commercial vehicles Oil separation modules and systems Cam frames Charge air ducts and intake air manifolds Resonators/EGR mixers Oil pans Oil intake modules Oil tanks Engine front and rear covers Transmission modules Cockpit cross-car beams Front-end carriers Engine and transmission mounts Ladder frame Pistons...

Major Suppliers  Updated at: 2025/07/17

nese, and Chinese car manufacturers with products for light vehicles. It will also support the expansion of the Company’s business with components for commercial vehicles in this region. -On August 28, 2024, the Company opened its new fully owned production plant in Pune, Western India. The new 7,500-sqm plant has already started a series of production of carpet systems, interior trim, wheelhouse outer liners, e-motor encapsulations, and other ...

Major Suppliers  Updated at: 2025/07/16

he new plant will be built because Aisin AW Co., Ltd., a subsidiary of Aisin Seiki, will boost production of automatic transmissions. The Nishio Plant produces automatic transmission cases, engine crankcases and other die casting parts, with an annual production capacity of 100,000 tons. The new 11,500 square-meter die casting plant will have an annual production capacity of 13,000 tons. (From an article in the Nikkan Jidosha Shimbun on May 27, 2...

Major Suppliers  Updated at: 2025/07/15

en, up 17.4% from FY 2009, and an operating income ratio of 4.5%. For FY2015, the company targets at revenues of over one trillion yen; an operating income ratio of over 5.0%: an overseas revenue ratio of over 50%, up 8 percentage points from FY2009; and in terms of value, overseas revenues of over 500 billion yen, almost twice the level of FY 2009. (From an article in the Nikkan Jidosha Shimbun on June. 10, 2010) Hitachi, L...

Major Suppliers  Updated at: 2025/07/14

t Account) 13.20 Toyota Industries Corporation 5.59 Custody Bank of Japan, Ltd. (Trust Account) 5.00 Toyota Fudosan Co., Ltd. 4.72 Nippon Life Insurance Company (Standing proxy the Master Trust Bank of Japan, Ltd.) 3.07 Employees Stock holdings 1.77 STATE STREET BANK AND TRUST COMPANY 505001 (Standing proxy Mizuho Bank, Ltd.) 1.32 STATE STREET BANK WEST CLIENT - TREATY 505234 (Standing proxy Mizuho Bank, Ltd.) 1.29 JP MORGAN CHASE...

Major Suppliers  Updated at: 2025/07/14

Technology Co., Ltd., will be established in Beijing, with a capital of CNY 50 million (JPY 1 billion). IAT Automobile Technology will own 60%, and Yazaki’s Chinese subsidiary, Yazaki (China) Investment Corporation (YCIC), 40%. IAT Automobile Technology, established in 2007, has completed nearly 500 vehicle development projects.(From an article in the Nikkan Jidosha Shimbun on August 13, 2024) The Company announced that Beijing IAT Yazaki New ...

Major Suppliers  Updated at: 2025/07/14

50% 75% 100%     Copyright (C) MarkLines Co., Ltd. All rights reserved. Trends in Earnings Forecasts (in JPY millions) Announcement Date Net sales Revision Operating profit Revision Ordinary profit Revision Profit attributable to owners of parent Revision 2024-02-14 129,000   6,700   7,500   5,000   2024-05-13 129,000 Unchanged 6,700 Unchanged 7,500 Unchanged 5,000 Unchanged 2024-08-08 122,000 Revised downward 4,700 Revised dow...

Major Suppliers  Updated at: 2025/07/14

ts Airbag inflators Ignitor cups Buckles Retractors Seating-Head restraint guide sleevesSmall Components-Vehicle body and chassis hole plugs Steering and suspension systems-Motor housingsThermal and fluid management systems-Coolant reservoir caps-Coolant connectors-Coolant control valves-Coolant tanks-Fluid routing management Manifold -Gear oil Solenoid sub assembly Solenoid housing Financial Overview (in USD millions)   FY ended Dec....

Major Suppliers  Updated at: 2025/07/10

nic throttle control: ETC/EGAS-Accelerator pedal modules-Electronic throttle bodies-ECU Engine management for manifold injection Fuel cell systems-Fuel-cell control units-Fuel-cell stacks-Anode recirculation blowers-Hydrogen gas injectors-Hot-film air-mass meters Fuel supply -Electric fuel pumps-In-tank fuel pump units-Fuel injectors-Fuel-supply modules Modules and engine components-Diagnosis modules for fuel tank leakage-Cylinder head covers-Oil...

Major Suppliers  Updated at: 2025/07/09

tronic throttle control: ETC/EGAS-Accelerator pedal modules-Electronic throttle bodies-ECUEngine management for manifold injectionFuel cell systems-Fuel-cell control units-Fuel-cell stacks-Anode recirculation blowers-Hydrogen gas injectors-Hot-film air-mass metersFuel supply -Electric fuel pumps-In-tank fuel pump units-Fuel injectors-Fuel-supply modulesModules and engine components-Diagnosis modules for fuel tank leakage-Cylinder head covers-Oil ...

Major Suppliers  Updated at: 2025/07/09

Wanxiang Qianchao Co., Ltd. China Chairman: Pin NI -The Company is a major Chinese supplier engaged in the development and manufacturing of automotive components, centering on universal joints. It manufactures products including universal joints, wheel hub units, bearings, automotive chassis and suspension systems, braking systems, transmissions, exhaust systems, and fuel tanks. -The Company supplies products to Merceded-Benz, BMW, Toyota, VW, GM...

Major Suppliers  Updated at: 2025/07/08

y systems-Mufflers-Adaptive valves-Battery top covers-Full battery housing solutions-Heated dosers-ASDS de-NOx systems-Low-pressure exhaust gas recirculation systems for gasoline system-Compact exhaust heat recovery systems-Electrically heated catalysts-Hydrogen storage systems-Conformable hydrogen tanks-Smart tank systems-Fuel cell stack systemsInteriors-Cockpits-Instrument panels-Cross-car beams-Center consoles-Decorative trim and components-Do...

Major Suppliers  Updated at: 2025/07/02

city to be converted into heat. The device features stepless power control, allowing rapid heating of the interior for passengers and regulating the temperature of the battery without energy losses. This speeds up the charging process and extends the vehicle range. The heater has a voltage range of 500 to 820 volts direct current with a 10-kW output. Its design allows the combination of up to 3 heaters for a maximum output of 30 kW. It can also c...

Major Suppliers  Updated at: 2025/06/26

Kautex Textron GmbH & Co. KG Germany Joerg Rautenstrauch (President and CEO) -The Company is a leader in developing and manufacturing plastic fuel systems, including blow-molded plastic fuel tanks for conventional vehicles and pressurized plastic fuel tanks for hybrid vehicles. The Company also develops clear-vision systems for automotive safety and ADAS applications, plastic tanks for selective catalytic reduction systems, engine camshafts, and ...

Major Suppliers  Updated at: 2025/06/17

adial shaft seals-Recirculation diaphragm-Seals on bipolar plates-Seals on gas diffusion layer-Seals for electronic modules-Sealing caps-Sealing covers-Sealing disks-Sealing mats-Sealing plugs-Shock absorber seals-Simmerring radial shaft seals-Stack sealings-Static seals-3D-formed all-plastic pipes-Tank valve O-rings-Thermally conductive elastomer materials-Thermoplastic materials-Thrust washers-Topographic 3D Thermal Interface Materials (TIM)-Va...

Major Suppliers  Updated at: 2025/06/03

igh-voltage application-Oil performance connectors-SealsEnector wallbox home EV charging system Compleo charging solutions-High power charging stations-DC charging stations-AC charging stations-Wallboxes Financial Overview -For the fiscal year ended December 31, 2024, the Company's sales were EUR 3,500 million, with approximately EUR 3,100 million coming from its Automotive Electrical Systems division. Recent Developments Vaylens, new EV charging...

Major Suppliers  Updated at: 2025/06/03

pumps & coolant pumps Electrical vapor pumps DC motor driven pumps Brushless DC motor (BLDC) motor driven pumps -Solenoid valves Electro-pneumatic valves and modules for pressure and vacuum pneumatic actuators Bypass valves for turbochargers Hydraulic and oil valves Coolant and water valves Fuel tank isolation valves -Advanced valvetrains DuoCam variable valvetrain on a single camshaft DuoPhase Link - twin output actuator upgrade for DuoCam ...

Major Suppliers  Updated at: 2025/06/03

l cells Schaeffler’s new mechatronic rear-wheel steering system goes into series production IAA Mobility 2023: Schaeffler to present new mobility concepts IAA Mobility 2023: Schaeffler and VDL Groep, Netherlands partner on self-driving electric shuttles IAA Mobility 2023: Schaeffler to invest EUR 500 million to expand electric motor production NAIAS 2023: Schaeffler exhibits at Electric & Hybrid Vehicle Tech Expo, Detroit Auto Show Schaeffler a...

Major Suppliers  Updated at: 2025/06/02

ts to form complex contours for aesthetic value-Agrifiber environmental seals-Frameless door sealing systems-Obstacle detection sensor systems-FlexiCore thermoplastic body sealsFuel and brake delivery systems-Fuel and vapor lines-Metallic brake lines and bundles-Combined fuel and brake line bundles-Tank lines-Fuel rails and fuel charging assemblies-Direct injection and port fuel rails-Quick Connect fuel system connectors-Quick Connect fuel system...

Major Suppliers  Updated at: 2025/06/02

motor efficiency and improves safety performances. (From an article in the Nikkan Jidosha Shimbun on March 20, 2014) Brose Fahrzeugteile GmbH & Co. KG has celebrated the grand opening of its new door systems plant in Bremen, Germany, creating 60 jobs in the first stage of this new venture. On the 4,500-square-meter shop floor, the company manufactures door systems for the new Mercedes-Benz C-Class. These are then delivered to the assembly line of...

Major Suppliers  Updated at: 2025/06/02