motors into three kinds. The company now has three types of drive motors in the same shape but with three different diameters to match different outputs for 110kW, 70kW and 40kW. These motors can also meet subtle output requirements by changing their thickness on a motor axis side and by adjusting winding amount. The company will develop three or four kinds of inverters as well to match different allowable current capacity. The company can respo...

Major Suppliers  Updated at: 2026/02/19

opting the process of single-side spot welding -Realizes integrated production of the component that provides space for the main pin (regarding the component as a stamping part instead of a single casting) -The company can decide the length of mass-produced pipes and reduce costs of molds, by using winding molds -It is lightweight and cost-effective since it uses one piece of plate to make the component that used to require two brackets and a cen...

Major Suppliers  Updated at: 2026/02/09

ed March 25, 2026) On March 30, Valeo inaugurated a new electric powertrain manufacturing line at its Pune plant in Lonikand, producing fully integrated 3-in-1 e-Axles combining the motor, inverter, and reducer for Mahindra's Born Electric vehicle platform. The line features automated U-Pin/Hairpin winding stator assembly, reducer assembly, inverter manufacturing, and final e-Axle assembly, with full digitalization and end-to-end traceability. T...

Major Suppliers  Updated at: 2026/02/09

e on a single cartridge than a car equipped with a cartridge. Models of motorcycle airbags, seat-integrated airbags, and 360° full-coverage airbags are on display. This is one of the three tanks installed in Toyota "MIRAI". The exhibited item is the rear-mounted product. The layers of carbon fiber winding enable the tank to be thinner and lighter while increasing its volume and ensuring structural strength. The resin liner on the inside prevents...

Major Suppliers  Updated at: 2026/02/09

itch uses are also envisioned, such as accessory storage, charging ports, and lighting. The combination of bamboo material and lighting creates a sense of luxury. A coating has also been devised to prevent loss of tactile comfort. To improve comfort and collision safety, the system uses a motor for winding. It winds up forcefully in an emergency and generates vibrations to inform the driver when fatigue or drowsiness is detected. The softness and...

Major Suppliers  Updated at: 2026/02/09

motors have led to heightened interest in axial gap motors, which are thinner, lighter and have a higher power density than conventional radial gap motors. By utilizing the company’s proprietary insulation coating technology, the company was able to reduce component and assembly costs by directly winding copper windings on the powder magnetic core. The winding space has also been expanded, which contributes to size reduction and high efficiency...

Major Suppliers  Updated at: 2026/02/09

mler AG's Mercedes-Benz vehicles. The new ISG system has a crankshaft-mounted motor. Compared to belt-driven starter-generators, the crankshaft-mounted motor produces higher output power and generates more electricity, which contributes to better fuel efficiency. Mitsubishi Electric's original coil winding technology realizes a high-density configuration for thick coils required in a 48V high-current motor. The new system combines both the high-p...

Major Suppliers  Updated at: 2026/02/09

OL AG, resulting in the ownership of 89% of AKASOL’s shares for EUR 648 million. Feb. 2022 Completed registration of merger squeeze of AKASOL AG, resulting in complete acquisition of AKASOL. Apr. 2022 Completed acquisition of Santroll Automotive Components, a developer of hairpin concentrated-winding eMotors for light electric vehicles, for CNY 1.4 billion. Aug. 2022 Completed acquisition of Rhombus Energy Solutions, a developer of electr...

Major Suppliers  Updated at: 2026/02/05

or electric motorcycles. Mitsuba plans to enter the electric motorcycle drive system business, and install a trial production line for a new product at its site in India in 2023 or later. The new product is likely to combine a drive motor and a controller. Mitsuba plans to use a “rectangular wire winding machine” in which round wires are formed into flat wires and then wound up, and is currently developing technology and facilities at its Nii...

Major Suppliers  Updated at: 2026/02/03

4.5 million units a year. The new plant will be constructed in the Lima Technology Center industrial park, which spans portions of Lipa City and Malvar City. The new plant is two stories high and has a site area of 16,144 square meters and a floor area of 7,101 square meters. Equipment including a winding machine, a coil assembly line, a furnace, a resin molding machine, and a three-dimensional measuring machine is scheduled to be installed at t...

Major Suppliers  Updated at: 2026/01/28

ost savings. It is expected to generate synergies in operations, optimize capital utilization, and support the company’s long-term sustainable growth, ultimately benefiting all stakeholders. Upon the merger’s effectiveness, Sundaram Auto Components Limited will be dissolved without the need for winding up. Based on the TVS Motor Company stock exchange notification On December 9, 2025, Brakes India, a TVS Group company, acquired a 10% sharehol...

Major Suppliers  Updated at: 2026/01/08

nominate one director to MECPL’s board as long as its shareholding remains below 26%. Based on Samvardhana Motherson International stock exchange notification On April 24, 2025, Samvardhana Motherson International Limited (SAMIL) announced that its subsidiary, SMRP B.V., will begin the process of winding down operations at the Judenbach plant in Germany. The decision follows SMRP B.V.'s acquisition of the assets of the Dr. Schneider Group in Oc...

Major Suppliers  Updated at: 2026/01/07

, with the appointed date set as April 1, 2024. RML has fixed April 22, 2025, as the record date to determine the shareholders eligible for the share allotment under the scheme. Post-amalgamation, REVL and RBL will cease to exist as separate legal entities and stand dissolved without undergoing the winding-up process. The merger is expected to streamline operations within the Rane Group.  Based on Rane Group stock exchange notification Nisshinbo...

Major Suppliers  Updated at: 2025/12/26

le valve timing mechanism parts Raw material powder, engine parts, transmission and drive parts, shock absorbers For Toyota. 700,000 units produced per month. In response to the growing need for electric units, it is also possible to propose solutions at the unit assembly stage, such as coil winding and resin moulding. Compared to the conventional product (left side of the first image), it has been miniaturised to approximately half the si...

Major Suppliers  Updated at: 2025/12/04

s realized by using a lamination process that uses resin and annealing. 0.1mm thick integrated press forming process uses a thin plate punching process and resin lamination. Rear-mounted e-axle unit for mini- and compact vehicles - With no permanent magnets, materials costs reduced. - Concentrated winding minimizes copper usage and motor size. - Unique shape and control method realizes low torque ripple. Daihatsu Subaru Toyota Mazda Hino Suzuki ...

Major Suppliers  Updated at: 2025/12/03

uire 100% shares of Sawafuji Electric in the end. After completion of these transactions, ARTS-4 and Sawafuji Electric are scheduled to merge. (From an article in the Nikkan Jidosha Shimbun on December 22, 2025) Tokyo Motor Show 2019 Hydrogen production technology from ammonia Stator of distributed winding for HV motor Stator of consentrated winding for HV motor Motor / Motor Driver for cooling fan Motor for Hybrid Vehicle Motor for Electric vehi...

Major Suppliers  Updated at: 2025/12/03

springs, to secure the maximum car interior space, an original high-strength material which contributes to weight reduction was used. Optimum technical design was carried out to pursue performance by softening the spring constant more than usual and increasing the number of turns by decreasing the winding outer diameter. Also, Chuo Spring’s technologies, such as high-precision cold spring manufacturing process technology that is environmentall...

Major Suppliers  Updated at: 2025/12/03

mber of shares less than one unit), and Toyota Industry will part of its Aisin shares. On the same day, Aisin announced sales of its shares, and acquisition of its own shares up to JPY 100 billion. In November 2023, Toyota, Toyota Industries, and Aisin announced sales of their stake in Denso. The unwinding of cross-shareholding in the Toyota Group is advancing. (From an article in the Nikkan Jidosha Shimbun on July 1, 2024) Aisin Corporation (For...

Major Suppliers  Updated at: 2025/11/14

19. The Governor finalized the investment with company executives while a working tour to Busan, Korea. Sungwoo Hitech was founded in 1977 and also produces thermal imaging cameras and LiDAR. The company designs and assembles its hydrogen tank systems, which feature plastic coating and carbon fiber winding forming technology. (Mexico-Now article dated May 19, 2023) Announced on January 15, 2024, Ingress Industrial Thailand PCL (INGRS), on January...

Major Suppliers  Updated at: 2025/11/13

development of production technologies that help to shorten delivery times. Yutaka Giken intends to increase revenue in its motor business to JPY 40 billion, more than five times of the FY 2023 level, in fiscal year 2030 (ending in March 2031). The company will construct a new pilot line for stator winding at its plant in Japan in November 2024. It will seek to diversify its motor-related business by receiving orders from OEMs. It will also set u...

Major Suppliers  Updated at: 2025/09/25