Search Results by Category

All information related to {{ key_word }}.
AI Navigation will guide you. Click here for information about {{ key_word }}.









_thumbnail.jpg)
1 - 20 of 36 results
AB SKF
s across the value chain. This includes a commitment to maintain at least 95% absolute reduction of scope 1 and 2 GHG emissions from 2030 to 2050 (2019 baseline). By 2050, SKF commits to reduce its absolute scope 3 GHG emissions from purchased goods and services, fuel and energy-related activities, upstream transportation and distribution and use of sold products by 90% (2019 baseline). (From a press release dated March 9, 2023) SKF announced tha...
Major Suppliers Updated at: 2025/07/15
Astemo, Ltd. (Formerly Hitachi Astemo, Ltd. )
n 2019 or later. Keihin Corporation, a Honda affiliate, is also strengthening its development capability. The company set up Daiba R&D Office in Tokyo in April 2018, aiming to enhance its capacity for electronic control system development for powertrain. The goal is to establish a system to develop upstream engine control software. (From an article in the Nikkan Jidosha Shimbun on June 30, 2018) Hitachi Automotive Systems (Hitachi AMS) announced ...
Major Suppliers Updated at: 2025/07/14
Denso Corporation
n 2019 or later. Keihin Corporation, a Honda affiliate, is also strengthening its development capability. The company set up Daiba R&D Office in Tokyo in April 2018, aiming to enhance its capacity for electronic control system development for powertrain. The goal is to establish a system to develop upstream engine control software. (From an article in the Nikkan Jidosha Shimbun on June 30, 2018) Denso Air Systems Michigan (ASMI) announced that it...
Major Suppliers Updated at: 2025/07/14
Bosch (Robert Bosch GmbH)
gas distributor NGD with high flow injector Electronic control unit Electronic control unit System strategy for CN6 emission regulation Low pressure EGR valve T-BOX Electronic Battery Sensor High-pressure pump Electronic control unit Denoxtronic 6-5 supply module Hot film air-mass meter NOx sensor (upstream) Catalytic converter(DOC+DPF+SCR) Speed sensor for (exhaust) turbocharger Phase sensor New radar sensor generation Next generation of front ...
Major Suppliers Updated at: 2025/07/09
NXP Semiconductors N.V.
cialty IC foundry services and lay the foundation for the future development. Following the initial production (slated for 2027), the expected monthly output is around 55,000 300mm wafers in 2029. This joint venture will create approximately 1,500 jobs while contributing to the development of the upstream and downstream supply chains, contributing to Singapore and the global semiconductor ecosystem. The new fab will adopt a fully automated prod...
Major Suppliers Updated at: 2025/07/04
FORVIA SE (FORVIA faurecia) (Formerly Faurecia SE)
orage system assembly line with an annual capacity of 1,000 sets. The opening of the company aims at expanding Faurecia SE’s hydrogen energy business in China, promoting the R&D and manufacturing of its cutting-edge hydrogen storage system product portfolio, and strengthening cooperation with the upstream and downstream of China’s hydrogen energy industrial chain. (From a Faurecia SE press release dated February 2, 2024) FORVIA faurecia annou...
Major Suppliers Updated at: 2025/07/02
Knorr-Bremse AG
Initiatives -The Company’s climate targets have been validated by the Science Based Targets initiative (SBTI). The Company aims to: Reduce global production-related carbon emissions (Scopes 1 and 2) by 75% by 2030 (2018 baseline). Cut absolute Scope 3 emissions from purchased goods and services, upstream transport and distribution, and the use of sold products by 25% by 2023 (2021 baseline). -(From a press release dated July 13, 2023) ...
Major Suppliers Updated at: 2025/06/24
Schaeffler AG
erpinned by ambitious mid-term sustainability targets. Its production facilities will already be climate neutral from 2030, and by 2025 it aims to prevent as much as three-quarters of its production emissions. The emissions from intermediates and raw materials occurring in the supply chain (Scope 3 upstream) will be reduced by 25% by 2030. The Schaeffler Group aims to achieve climate neutrality in this area as well by 2040. Specific measures for ...
Major Suppliers Updated at: 2025/06/02
MICHELIN (Compagnie Generale des Etablissements Michelin S.C.A.)
ess before the end of 2019. Rubberway is a technological solution that maps and assesses practices and risks regarding environmental issues, social affairs, and Corporate Social Responsibility governance throughout the natural-rubber industry, from rubber-processing plants downstream to plantations upstream. Rubberway will provide its users (tire manufactures) with the collected data and enable them to identify and improve sustainability in the n...
Major Suppliers Updated at: 2025/05/27
CATL (Contemporary Amperex Technology Co., Ltd.)
China, the finished vehicle and power battery aftermarkets, and establishment of industrial ecosystems, the two companies plan to launch in-depth cooperation on the electrification of commercial vehicles for advantage complementation and a win-win situation. In the future, CATL will work with more upstream and downstream partners to further promote the popularization of commercial vehicle battery technology.(From a CATL press release dated Febr...
Major Suppliers Updated at: 2025/05/19
Nexteer Automotive Group Ltd.
ications. It expands Nexteer's software development by focusing on downstream software production and validation - ensuring quality and compliance with regulations. Meanwhile, Nexteer's Global Technical Center in the US - in tandem with regional Technical Centers in Poland and China - will continue upstream software development and R&D innovation. Currently, Nexteer's ISC employs almost 100 Nexteer software engineers with plans to grow to 200 emp...
Major Suppliers Updated at: 2025/05/08
Dowlais Group plc
nge Rover Evoque’s overall fuel consumption reduction of up to 11.4% (depending on model). The GKN All-Wheel Drive System includes a GKN power transfer unit (PTU), linked to the transmission’s final drive differential, containing a synchronizer and brake to disconnect the all-wheel drive system upstream of the PTU hypoid gears. At the rear of the system the GKN TWINSTER rear drive module (RDM) drives each rear wheel via an independent wet mul...
Major Suppliers Updated at: 2025/05/03
ams-OSRAM AG
rder to consistently reduce its own CO2 balance sheet, the company is increasing its focusing on energy efficiency both in its own production and at its administrative and development sites, effective this financial year, with the goal of becoming CO2-neutral in 2030. Osram also intends to make its upstream and downstream supply chain more energy efficient in order to achieve its ambitious goals. The consistent use of renewable energies also play...
Major Suppliers Updated at: 2025/05/01
The Goodyear Tire & Rubber Company
zero greenhouse gas (GHG) emissions across its value chain by 2050 from a 2019 base year. It also targets reducing absolute Scope 1 and 2 GHG emissions by 46% by 2030 from a 2019 base year, and absolute Scope 3 GHG emissions from purchased goods and services, fuel and energy-related activities, and upstream transportation by 28% within the same timeframe. In addition, these Company's science-based near-term and net-zero GHG reduction targets were...
Major Suppliers Updated at: 2025/04/25
Benteler Group (Benteler Automobiltechnik GmbH)
Scope 1 and 2) are to be halved by 2030 (the base year 2019). Scope 3 emissions for purchased goods and services as well as fuel- and energy-related emissions are to be reduced by 30% in the first step (the base year 2019). By 2050, Benteler wants to achieve net-zero emissions for Scope 1,2, and 3 (upstream). The Benteler Steel/Tube division is striving to achieve CO2 neutrality by 2045. Conserving resources will be given an even higher priority ...
Major Suppliers Updated at: 2025/04/25
Sensata Technologies, Inc.
ny acquired Schrader for USD 1.0 billion. (From a press release on October 14, 2014) Sensata Technologies, Inc. completed development on its second generation Differential Pressure Sensor (DPS) for use in diesel engines to help control emissions. The DPS measures the pressure difference between the upstream and downstream sides of exhaust particle filter systems. If the pressure difference exceeds a certain level, filter regeneration occurs to pr...
Major Suppliers Updated at: 2025/04/23
Continental AG
heavy-duty long-haul trucks, urban light trucks or municipal vehicles. At the IAA, the company will present solutions like close-coupled systems and, alternatively, an architecture based on an innovative combination of diesel injection into the exhaust stream and an electric heating element mounted upstream of the catalyst. For the actual selective catalytic reduction (SCR) of NOx emissions in the exhaust gas, an aqueous urea solution is injected...
Major Suppliers Updated at: 2025/04/22
BorgWarner Inc.
Suzuki "Solio" -Compact and high power density solution. Suitable for P2 hybrid vehicles where installation space is very limited. Approximately 30% shorter than centrally wound stators, but with over 50% higher torque density. -Complementary to conventional turbocharger systems. Installed upstream or downstream of a conventional turbocharger, it increases boost pressure and improves transient engine response at low RPM. This technology ...
Major Suppliers Updated at: 2025/04/02
thyssenkrupp AG (Formerly ThyssenKrupp AG)
ainable wheel production. Compared with conventional steel, it offers emission savings of 70% up to the hot strip production stage. bluemint Steel is a flat steel product that does not have any effect on the balance of emissions at the Duisburg site – the emissions of what is referred to as the upstream chain (Scope 3) are reported. These are all emissions that occur during the production and transport of the input materials. In this way, the...
Major Suppliers Updated at: 2025/03/13
Ningbo Huaxiang Electronic Co., Ltd.
al park integrating R&D, production, and sales, with a total investment of about CNY 1.5 billion. With a total floor area of about 120,000 square meters, the park will mainly manufacture such products for BMW Brilliance NEVs as chassis, interior and exterior trims, and battery housings, and conduct upstream and downstream businesses related to the automotive parts industry upon completion. It is planned to be completed and commissioned in May 202...
Major Suppliers Updated at: 2024/12/09