Search Results by Category

All information related to {{ key_word }}.
AI Navigation will guide you. Click here for information about {{ key_word }}.










1 - 20 of 255 results
Kautex Textron GmbH & Co. KG
DAR manufacturers, testing organizations, and sensor heating and cleaning solution providers. (From a press release dated December 4, 2024) SiKuBa research project for enhancing EV safety-Farasis Energy has joined a research consortium together with the Company and the Fraunhofer Institute for High-Speed Dynamics, Ernst-Mach-Institut, EMI in a three-year project called SiKuBa for increased safety of EVs. Started in July 2023, the project aims to ...
Major Suppliers Updated at: 2025/06/17
Kongsberg Automotive ASA
el cell recharging systems. Dog Clutch Actuator and Electronic Gear Shift Actuator-In 2024, the Company's Drive Control Systems business segment also launched its’ first Dog Clutch Actuator for an electric axle in bus applications. It has also developed Dog Clutch Actuator that offers for both 2-speed and 4-speed applications. Furthermore, it has collaborated with several OEMs to develop Electronic Gear Shift Actuator to improve its performanc...
Major Suppliers Updated at: 2025/06/06
Grupo Antolin-Irausa, S.A.
ama roof, which is integrated into the ceiling trim (called the headliner) of the car which is made from the very light Polyurethane Elastoflex E 3943/134. The actual sunroof opening in the headliner is supported by a structural bracket. Traditionally this is made of heavy steel. With Ultradur High Speed a metal replacement solution is now used. They have successfully validated the Polybutylenterephthalate (PBT) Ultradur High Speed in plastic fra...
Major Suppliers Updated at: 2025/06/05
Freudenberg SE
uced two new patented sealing solutions for in-wheel motors (IWM). The solution can support OEMs and electric motor manufacturers for motors used in applications ranging from electric passenger cars to commercial vehicles. The seal geometry provides reliable protection against dirt and water at any speed. It can also dynamically adjust sealing effectiveness and friction to wheel speed to prevent friction losses. The first design, a cassette seal...
Major Suppliers Updated at: 2025/06/03
Leopold Kostal GmbH & Co. KG
h Turn signal switch Rear lamp Driver assistance camera Seat adjustment switch including memory Electronic parking brake switch Steering column switch assembly Head lamp switch Keyless entry system Combination switch Interior switch Battery module connector Electric connector for 600V application 9-speed automatic transmission connector Driver assistance monocular camera Door lock switch Navigation control switch Steering column module (Sourced b...
Major Suppliers Updated at: 2025/06/03
Rheinmetall AG
erations. Kolbenschmidt Pierburg Shanghai Nonferrous Components is a 50-50 joint venture between HUAYU Automotive Systems and KSPG of Germany. (From a press release on April 22, 2015) KSPG announced its new electronic control throttle body. The throttle body adjusts the torque and controls the idle speed at the driver's request. The actuator of the throttle body can also control the intake management systems of diesel and gasoline engines. In add...
Major Suppliers Updated at: 2025/06/03
Schaeffler AG
ll control units-Battery management controllers-48V hybrid modules-Mild hybrid and micro-hybrid drives-Plug-in hybrid drives-Electric motors-DC-DC converters-Power distribution units-Inverters-Power modules-Charging communication units-Smart hydraulics-Rolling bearing solutions for E-Mobility High-speed ball bearings High-speed cylindrical roller bearings Sensor bearings Current shunt bearings Angular roller unit (ARU) bearing concept Tandem bal...
Major Suppliers Updated at: 2025/06/02
Cooper-Standard Holdings Inc.
in Mexico, the company recently celebrated the groundbreaking of its new 100,000 square-foot mixing facility in Aguascalientes, Mexico. The new facility, which represents an USD 11 million investment, supports the company's mission to accelerate innovation while delivering world-class quality with speed and efficiency. It is expected that the facility will begin operations in early 2019 and ultimately employ about 100 employees at full capacity....
Major Suppliers Updated at: 2025/06/02
Brose Fahrzeugteile SE & Co. KG, Coburg
ally friendly materials and processes. (From a press release dated November 25, 2024) Product Development Acoustic Vehicle Alerting System for EVs-The Company has developed a new Acoustic Vehicle Alerting System (AVAS) for electrified vehicles. The AVAS module generates artificial driving noises at speeds below 50 km/h, thereby increasing safety for road users. By leveraging the Company’s expertise in acoustics and electronics including the dev...
Major Suppliers Updated at: 2025/06/02
MANN+HUMMEL GmbH
received the company's Overdrive Award. This is the 19th time that MANN+HUMMEL has received GM's Supplier of the Year. (From a press release on March 27, 2014) MANN+HUMMEL GmbH has created a technical center for the injection molding and welding of plastic parts in Ludwigsburg, Germany, in order to speed up the transition from development to series production. The core facilities at the MANN+HUMMEL technical center include two fully electric inje...
Major Suppliers Updated at: 2025/06/02
Bosch (Robert Bosch GmbH)
system actuation-ECU actuators and modules-ECUs for automated shift transmissions-Continuously Variable Transmission (CVT) pushbelts-Dedicated hybrid continuously variable transmission (DH-CVT)-ECUs for CVT-Pushbelts-Variable-force transmission solenoids-Direct electric shift controls-Transmission speed sensors-Linear-force solenoids Turbochargers Start/Stop systems-Boost Recuperation System (BRS) Sensors-Engine management sensors-Exhaust manage...
Major Suppliers Updated at: 2025/05/29
Hutchinson S.A.
geographical strengths to be combined to contribute to the development of sustainable mobility. (From a press release dated November 5, 2021) Hutchinson presented a new customized sensor technology: Dymeo. This solution provides absolute angle measurement, precise motion control and instantaneous speed measurement. This custom-made sensor solution has been created to complement the range of magnetic speed and position measurement solutions. Dym...
Major Suppliers Updated at: 2025/05/29
Schaeffler AG (Formerly Vitesco Technologies Group AG)
1. The E-drive is a 3-in-1 unit integrating power electronics, an electric motor, and a reducer. Despite its compact dimensions and its low weight of only 76 kg, the axle drives for Honda achieve a peak output of 150 kW and 310 Nm of torque. This specification allows e:Ny1 to reach a limited top speed of 160 km/h. e:Ny1 is a 4-door EV SUV with a range of 412 km. (From a press release dated July 31, 2023) 800V high-voltage silicon carbide plat...
Major Suppliers Updated at: 2025/05/29
MICHELIN (Compagnie Generale des Etablissements Michelin S.C.A.)
From an article of Post Today on July 19, 2017) Nihon Michelin Tire Co., Ltd. (Nihon Michelin Tire) announced that its "Michelin Primacy 3" tire has been selected for Toyota Motor Corporation's new Camry as original equipment. The Primacy 3 tire was developed with an aim to provide comfort and high speed stability. The company ensured driving stability by optimizing contact area configuration, and adopted a full-silica compound to improve wet gri...
Major Suppliers Updated at: 2025/05/27
TI Fluid Systems Plc. (Formerly TI Automotive Limited)
e company to work closely with its local OEM customers. The eMIC brings together 6 core competencies under one roof – virtual engineering, designing, processing, prototyping, product testing, and vehicle testing. This enables the company to provide customers with the faster design and development speed they seek. (From a press release dated October 26, 2023) TI Fluid Systems plc. (TI Fluid Systems) announced that it has completed a deal to acq...
Major Suppliers Updated at: 2025/05/23
Daido Metal Co., Ltd.
income. Click here for details Daido Metal Co., Ltd. announced that it has established its new wholly-owned subsidiary in Inuyama, Aichi Prefecture, Japan. Capitalized at 80 million yen, the new company, DAIDO INDUSTRIAL BEARING JAPAN CO., LTD., will be engaged in machining for middle and high speed engine bearings. (From a press release on July 6, 2012) Daido Metal Co., Ltd. will integrate production of engine bearings for the North America...
Major Suppliers Updated at: 2025/05/20
CATL (Contemporary Amperex Technology Co., Ltd.)
attery sales reached 475 GWh, up 21.79% y/y. Vehicle drive battery system sales totaled 381 GWh (+18.85% y/y), while energy storage battery system sales reached 93 GWh (+34.32% y/y). -For passenger vehicles, CATL launched the Shengxing and Qilin battery series, meeting diverse needs for charging speed, range, and power. The Xiaoyao battery was developed for hybrid vehicles. -For commercial vehicles, the Tianxing battery series was developed...
Major Suppliers Updated at: 2025/05/19
MAHLE GmbH
uch as the electric compressor, heat exchanger, refrigerant valves, and other parts into one unit, which controls the temperature of the battery, vehicle cabin, powertrain, and power electronics. It can significantly increase the cruising range of electric cars by up to 20% and improve its charging speed. The Company’s modular design approach also enables smaller installation spaces and reduces assembly expenditures. One of the modules is parti...
Major Suppliers Updated at: 2025/05/15
Hella GmbH & Co. KGaA (FORVIA HELLA)
ince 1 July 2019, in order to protect road users such as pedestrians, cyclists and the visually impaired, new types of electric, hybrid and fuel cell vehicles in the European Union have had to be fitted with an acoustic signal as standard. This sound makes otherwise silent vehicles very audible. At speeds below 20 km/h, the HELLA warning system AVAS simulates a noise that rises in intensity when the speed increases. The AVAS also automatically ge...
Major Suppliers Updated at: 2025/05/15
Kyung Chang Industrial Co., Ltd.
arts, whose cost to sales ratios are relatively low, led to the increases in both sales and profit." (From a press release by the company on Mar. 2, 2007) Kyung Chang Industrial Co., Ltd. announced on March 19 that the company was awarded a contract to supply parts for use in the next-generation 5-speed and 6-speed transmissions made by Hyundai Motor and Kia Motors. The new contract, which covers the period between 2008 and 2015, is expected to ...
Major Suppliers Updated at: 2025/05/14