ly in production in China. Production in Japan possible. -Product for NEV (New Energy Vehicles) -Product for NEV (New Energy Vehicles) -Product for NEV (New Energy Vehicles) -High noise reduction in the millimeter waveband region can be expected by attaching to a metal layer. -Lightweight (specific gravity below 1.5) and flexible. High tensile elongation (>250%). TIM material with high conformability to uneven surfaces and excellent thermal ...

Major Suppliers  Updated at: 2026/03/20

vehicle comfort and stability -Symmetrical gearbox with bevel gear and vertical motor layout for improved weight balance and space savings. -The motor is installed in the longitudinal direction of the vehicle, and the gearbox axis is perpendicular to the motor axis, which makes the unit's center of gravity the center of the vehicle, contributing to improved vehicle dynamics. -Battery management system for HEVs equipped with 4 cell monitoring ICs ...

Major Suppliers  Updated at: 2026/02/19

y for EV operation, the company has achieved a 23% reduction in size and a 17% reduction in weight compared to the conventional installation of separate components. In addition, the increased ease of installation in the vehicle contributes to securing a flexible interior space and a lower center of gravity on the EV-specific platform first adopted for the bZ series. (From a press release dated April 13, 2022) An industrial water leakage occurred ...

Major Suppliers  Updated at: 2026/02/09

tures include high porosity (up to 98%), considerably higher than other porous metals, such as nonwoven metal fabric and foam metal. Celmet has recently been adopted as a positive electrode current collector in hybrid vehicle nickel-hydrogen batteries. Aluminum-Celmet offers lightness (the specific gravity of aluminum is about one-third that of nickel) and greater electrical conductivity (or low electrical resistivity, less than half that of nick...

Major Suppliers  Updated at: 2026/02/09

tric drive units. AAM worked with Jaguar to design, develop and build the e-AAM electric drive units for the I-PACE. AAM’s I-PACE system includes two power dense electric drive units that are designed to maximize power but minimize system space and help contribute to the vehicle’s low center of gravity. Using Jaguar-designed permanent magnet motors, AAM’s independently controlled drive units provide immediate torque and all-wheel drive for ...

Major Suppliers  Updated at: 2026/02/06

. The operations will commence by September 2019. It has been built with a project investment of USD 90 million. It will produce 1,000 tonnes of castings in the first year of production and in five years, will scale output to 10,000 tonnes. SCL will manufacture a range of high-pressure die-cast and gravity die-cast parts in this facility. Apart from its US facility, SCL has also invested recently in a new plant in Tamil Nadu, India. The company i...

Major Suppliers  Updated at: 2026/01/08

Daido Pvt. Ltd.-Engine bearings-Steel-backed PTFE-based bushings-Thrust washersBimetal Bearings Ltd.-Engine bearings-Bushings-Thrust washers-Copper alloy powders-Copper alloy strips-Aluminum alloy stripsIndia Pistons Ltd.-Alfin Ring Carrier pistons for medium and heavy-duty diesel engines-Aluminium Gravity Die casting pistons-Aluminum Alloy Pistons for both gasoline & diesel engines-Camshafts-Cast Iron parts-Circlips-Cooling gallery pistons for C...

Major Suppliers  Updated at: 2026/01/07

r 2024, Toyota Tsusho acquired Planic’s shares from Veolia Japan to make Planic one of its group companies. Planic manufactures high-quality recycled plastics by utilizing the raw material collected from ASR recycling facilities and home appliance recycling plants, as well as “advanced specific gravity separation technology” that uses liquids with different specific gravities. (From an article in the Nikkan Jidosha Shimbun on July 23, 2025)...

Major Suppliers  Updated at: 2025/12/16

Asahi Tec Corporation Japan Shuichi Taguchi (President and CEO) -Mainly manufacture and sale of Aluminum wheel for automobiles and motorcycles and aluminum gravity casting parts for automobiles. -In January 2017, ATA Casting Technology Japan Co., Ltd. was transferred to Daido Metal Co., Ltd.-In April 2018, all the shares held by Asahi Tec Aluminum Co., Ltd. and Hoei Corporation were transferred to Ryobi.-In May 2018, the company became a 100% sub...

Major Suppliers  Updated at: 2025/12/03

between the two drive motors and the two drive ratios to match the electric vehicle’s driving situation, power consumption efficiency improvement of about 10% can be achieved. In addition, the low overall height of the next generation gearbox can contribute to a low floor design and low center of gravity of the vehicle. The DMM Axle is an innovative e-Axle that incorporates two motors and a two-stage gearbox, and automatically switches between ...

Major Suppliers  Updated at: 2025/12/02

t supplying the new bearing in the second half of 2015. (From an article in the Nikkan Jidosha Shimbun on February 12, 2015) Taiho Kogyo Co., Ltd. has developed the industry-first method to produce die-cast curved pipes and reduce production costs by 30 percent. The new method replaces the existing gravity casting method to produce auto parts. The company has commercialized an air intake pipe for superchargers utilizing the method. In an existing...

Major Suppliers  Updated at: 2025/11/27

.2 billion (a deficit of JPY 68 million in the period April-September 2023). (From an article in the Nikkan Jidosha Shimbun on November 20, 2024) TBK Co., Ltd. (TBK) announced that the new plant of TBKK (Thailand) Co., Ltd. (TBKK), a Thai subsidiary of TBK, has started volume production of aluminum gravity die casting (GDC) parts of turbocharger compressors. This is the TBK Group’s first production of aluminum GDC parts. The annual production v...

Major Suppliers  Updated at: 2025/11/27

haft for hybrid vehicles Right: Oil pump housing Bottom: Oil pump shaft -These products are the First-time Exhibit. Center: Turbo compressor housing -First-time Exhibit -Installed parts for Toyota D-4S engine for turbocharger - Cost is reduced 30% by using die casting rather than gravity casting. Combining three pieces achieves the same high efficiency as casting. -10 million roller arms and 7 million lash adjusters are produce...

Major Suppliers  Updated at: 2025/11/26

e being equipped on the Hyundai Tucson ix compact SUVs. (From a press release on Aug. 27, 2009) Mando-Hella Electronics Corp. (based in Korea) announced that its new plant in Songdo, Incheon City has been completed. In March 2010, the plant will start mass production of ECUs, yaw rate sensors, and gravity sensors for anti-lock brake systems (ABSs) and electronic stability control systems (ESCs). These products will be featured on the Kia Soul. M...

Major Suppliers  Updated at: 2025/11/21

controlling the equipment and the operation panel for operating and stopping machines are connected in a virtual space to confirm the operation. As with the actual equipment, it faithfully reproduced the sensors' response, the pallet movement on which the product is placed, and even the effects of gravity when items fall from the conveyor. (From an article in the Nikkan Jidosha Shimbun on March 27, 2026) Aisin Seiki Co., Ltd. has started to cons...

Major Suppliers  Updated at: 2025/11/14

Genesis GV70 Hyundai Santa Fe Stargazer Creta Custo i35 Syros Venue Casper Kia Carens Mohave Sorento Sportage Soul Sonet -Type of vehicle equipped on: EV Genesis G80 EV GV70 EV Hyundai IONIQ 9 IONIQ 6 IONIQ 5 KONA EV Kia EV9 EV6 Rivian R1S R1T Lucid Motors Lucid Air Lucid Gravity Structure & Mechanism-Frame-Slide Rail-Recliner-Pumping Device Functional Component-Ergo Motion Seat-Dynamic Body Care Seat-Thermal Comfort...

Major Suppliers  Updated at: 2025/09/30

lopment and have reached the sample evaluation stage. Hankook Tire & Technology expects that this development will smooth the supply and demand of raw materials while also contributing to price stabilization. (From a press release on January 10, 2025) Orders Installed vehicles Products Lucid GravityHyundai IONIQ 9 iON evo AS SUV Cupra TerramarVW Tiguan Ventus evo SUV Kia Tasman X-Pro Dynapro AT2 Xtreme BMW M5 Ventus S1 evo Z Cupra ...

Major Suppliers  Updated at: 2025/09/30

na" Mitsubishi "Eclipse Cross" -Installation model : Nissan "Note" Mitsubishi "Mirage" Suzuki "Swift Hybrid RS" -Compact coaxial structure with planetary system. Compared to other companies' e-Axles, the unit volume can be reduced, contributing to improved cruising range and lowering the center of gravity of the vehicle. -Planned for installation in mass-produced vehicles in the mid-2020s. -A 3-axis type e-Axle consisting of a motor, an inverter...

Major Suppliers  Updated at: 2025/09/25

in the following months. In Germany, the electric city bus can be seen at the IAA Mobility in Munich. Up to ten batteries can be installed which have a total storage capacity of up to 350 kilowatt-hours. The battery modules are installed on the roof and rear of the bus to achieve superior centre of gravity and vehicle dynamics while driving along curves. The range of the electric bus is more than 300 kilometers depending on the topography and usa...

Major Suppliers  Updated at: 2025/09/22

istent ground clearance while driving and enables the body to be raised by up to 40 millimeters above the standard level of 190 millimeters for better handling of rough terrain. With the Sportplus or low level setting, the body is lowered by 10 millimeters from the normal level. The lower center of gravity improves drive quality and reduces fuel consumption at higher speeds. (From a press release on March 24, 2014) Trelleborg Sealing Solutions an...

Major Suppliers  Updated at: 2025/09/17