ring gears and pinion gears Differential gears and crosses Transmission gears Mumbra Plant(Maharashtra) 180,000 1,000,000 3,000,000 11,437,480 IATF16949 Faridabad Plant(Haryana) 900,000 36,000 3,300,000 472,000 IATF16949, ISO14001, ISO45001 Lonand (Satara) Plant(Maharashtra) - - 3,600,000 828,800 IATF16949, ISO14001, ISO45001 1972 Foundation stone laid at Mumbra Factory. 1974 Inauguration of the Hypoid Plant and commencement of prod...

Major Suppliers  Updated at: 2025/12/19

try, and governmental organization to develop next-generation battery talent GS Yuasa Corp. announced development of "Prothium," a new nickel hydride battery for the next generation hybrid vehicles. This new battery has achieved the world-highest level of output density for a cylindrical battery, 1,800 watt/kg (cell standards), which will greatly improve fuel efficiency and acceleration performance while reducing cost per output by 20% compared t...

Major Suppliers  Updated at: 2025/12/17

se over the previous year's JPY 16.2 billion. 3) Ordinary profit-Ordinary income declined 7.2% YoY to JPY 17.5 billion. It was JPY 1.4 billion less than the previous year's JPY 18.9 billion. 4) Profit attributable to owners of parent-Net income decreased 6.0% YoY to JPY 12.4 billion. This was a JPY 800 million decrease from the previous year's net income.   Full Year Earnings Forecast Progress Against Full-Year Forecasts               ...

Major Suppliers  Updated at: 2025/12/17

100%     Copyright (C) MarkLines Co., Ltd. All rights reserved. Trends in Earnings Forecasts (in JPY millions) Announcement Date Net sales Revision Operating profit Revision Ordinary profit Revision Profit attributable to owners of parent Revision 2024-05-15 287,000   7,300   8,200   7,800   2024-08-07 287,000 Unchanged 7,300 Unchanged 8,200 Unchanged 7,800 Unchanged 2024-11-14 279,800 Revised downward 6,750 Revised downward 5,8...

Major Suppliers  Updated at: 2025/12/17

les Revision Operating profit Revision Profit before tax Revision Profit attributable to owners of parent Revision 2024-04-26 300,000   7,000   7,000   3,700   2024-07-31 300,000 Unchanged 7,000 Unchanged 7,000 Unchanged 3,700 Unchanged 2024-10-31 300,000 Unchanged 10,000 Revised upward 9,800 Revised upward 6,400 Revised upward 2025-01-31 300,000 Unchanged 10,000 Unchanged 9,800 Unchanged 6,400 Unchanged   *The above forecasts are...

Major Suppliers  Updated at: 2025/12/17

All rights reserved. Trends in Earnings Forecasts (in JPY millions) Announcement Date Net sales Revision Operating profit Revision Ordinary profit Revision Profit attributable to owners of parent Revision 2025-10-08 200,000   3,500   1,500   (2,000)   2024-08-14 220,000 Revised upward 4,800 Revised upward 2,000 Revised upward (1,500) Revised upward 2024-11-14 210,000 Revised downward 500 Revised downward (500) Revised downward -   ...

Major Suppliers  Updated at: 2025/12/16

tment of 3.1 billion yen, the proving ground was extended to 63 hectares – thereby doubling its size. Since its opening in 1992 the total investment in the TCM amounts to 8.3 billion yen. The enlarged test course is now equipped with a dynamic driving area which is counting a diameter of 300m, an 800 m long 4-lane straight track, and a new emergency escape area. Bosch will additionally invest one billion yen in order to build up a handling cour...

Major Suppliers  Updated at: 2025/12/16

nt, which had been partially suspended in the aftermath of the Niigata Chuetsuoki Earthquake. Quick resumption of operations was made possible by prompt massive support from automakers and suppliers including sending their employees for rescue works. Despite huge damages inflicted on most of over 1,800 manufacturing equipment like dislocations and tumbles, time-consuming repair works on casting tools and equipment were completed by July 30, some ...

Major Suppliers  Updated at: 2025/12/16

a press release on May 29, 2013) PT. Astra Otoparts Tbk and Toyoda Gosei Co., Ltd. announced plans to increase production capacity of their Indonesian joint venture PT. Toyoda Gosei Safety Systems Indonesia (TGSSI), i.e. the steering wheel products 1.5 times in 2016 from the current capacity to be 800,000 units/year, while airbag products to be 1.5 million units/year in 2016, or about five times from the current capacity. The additional investme...

Major Suppliers  Updated at: 2025/12/15

ng for domestic and medical industries, is expected to increase 70 percent year-on-year to 6.8 billion yen. In the domestic market, the company will spend approximately 1.3 billion yen mainly for renewing molds, which represents a year-on-year decrease of 27.8 percent. Meanwhile, it plans to invest 800 million yen in its U.S. plant to increase production capacity of metal components. By integrating its automatic production lines into its U.S. fac...

Major Suppliers  Updated at: 2025/12/15

try modified a part of its existing lines to reduce cost increases for producing low-volume models. The company started producing the new model at its Yokkaichi Factory in Yokkaichi, Mie Prefecture, Japan. Yachiyo Industry uses a lot production system for the model to manufacture 40 units daily, or 800 units per month. (From an article in the Nikkan Jidosha Shimbun on March 31, 2015) Yachiyo Industry Co., Ltd. announced that it will expand its ca...

Major Suppliers  Updated at: 2025/12/11

up new subsidiary to manufacture cast iron parts in Mexico Aisin invests USD 1.19 million in Guanajuato, Mexico Aisin Group to exhibit at 2018 North American International Auto Show Aisin Takaoka inaugurating foundry plant in Northeast Japan next spring Mazda becoming pioneer to use high-tensile 1,800MPa steel on vehicle Aisin Takaoka establishes third plant in China Aisin Group increasing investments, planning 130 billion yen in R&D, 200 billio...

Major Suppliers  Updated at: 2025/12/08

ng Province, China in October 2016. The new company will be capitalized at CNY 10 million (approximately JPY 160 million), which will be fully provided by Jiaxing Murakami. The new company will construct a plant to manufacture and sell automotive rear-view mirrors, which will have a land area of 11,800 square meters and a floor area of 7,000 square meters. Production is scheduled to begin in January 2018 and there are expected to be 88 employees....

Major Suppliers  Updated at: 2025/12/05

d. This approach reduces energy losses and costs while increasing efficiency, driving range, and design flexibility. The scalable platform meets the industry’s highest functional safety standard, ASIL D (Automotive Safety Integrity Level D). It can be used in 400V EVs and in the new generation of 800V models that enable ultra-fast charging. It can also be configured with traditional silicon modules for cost-sensitive models, silicon carbide for...

Major Suppliers  Updated at: 2025/12/05

The supplier will make a formal request to Hitachi to send a person to become President, as soon as the discussion is concluded. The unsettled company intends to rebuild its management by receiving the top executive from Hitachi, which is one of leading suppliers of automotive parts that generates 800 billion yen sales and has businesses with most of major automakers. (From a story in the Nikkan Jidosha Shimbunon Nov. 1, 2007) U-shin Ltd., an au...

Major Suppliers  Updated at: 2025/12/05

ol for Youth (renamed Press Technical College in 1970). Jan. 1953 Succeeded in producing Japan's first stamped large-sized rear axle housing. Feb. 1954 Went public on the Tokyo over-the-counter market (50 million yen capital). Aug. 1961 Listed on the first section of the Tokyo Stock Exchange (800 million capital). Oct. 1961 Listed on the first section of the Osaka Stock Exchange (800 million capital). Jul. 1988 Established a joint ventu...

Major Suppliers  Updated at: 2025/12/04

. (From an article in the Nikkan Jidosha Shimbun on October 17, 2013) Unipres Corporation will establish a joint venture (JV) for producing automotive stamping parts in Dalian, Liaoning Province, China, in January 2014. The JV, Unipres Sunrise Corporation, will be capitalized at CNY 50 million (JPY 800 million). 40% of the capital will be invested by Unipres (China) Corporation, 40% by Xiangyang Sunrise Machinery Co., Ltd., and the remaining 20% ...

Major Suppliers  Updated at: 2025/12/04

operations. The measures will be also implemented in the functional glass materials division, which is making products such as rubber cords for timing belts. Further, following last fiscal year's personnel downsizing program, which resulted in a 3,000 reduction in headcount, a further cutback of 2,800 employees is scheduled for this fiscal year ending in March 2010. In the current fiscal term, the company is likely to generate a loss of approxim...

Major Suppliers  Updated at: 2025/12/03

located within the premises of Zhengzhou Nissan Automobile Co., Ltd., which is calling for local production. The on-site production system at the customer's plant will contribute to saving time and cost of transportation. With an investment of 15 million yuan (approximately 229 million yen), the 1,800-square-meter plant will perform the finishing process of door frames, starting in December 2013. In fiscal year 2014, the Changchun facility is ex...

Major Suppliers  Updated at: 2025/12/03

he company on Dec. 1 to start developing specific action plans for manufacturing cost reduction as well as operational improvement. The target of its streamlining efforts is to establish itself so as to be profitable even if the monthly sales should drop down to the high 700 millions of yen through 800 million yen. The work-restructuring promotion committee will clarify the problems by March 2010, and the resulted specific measures will be includ...

Major Suppliers  Updated at: 2025/12/03