ion lamp Steering switch Rear Carbon Spoiler EMS (Electronics Manufacturing Service) Rear lamp parts Cover Lens Film Insert Molding (FIM) Automotive Interiors Expo Europe 2022 Automotive Interiors Expo 2023 PRND console Molded Interconnect Device assembly process steps IME (in-mold electronics) shape sample Eco-friendly artificial leathers Sustainable polymer composites Smart grille Emblem lighting Cover lens with double insert film Forming f...

Search Suppliers  Updated at: 2026/03/17

al -Material: Epoxy/Carbon fiber -Process: Autoclave -Material: Bcomp's ampliTex natural fiber reinforcement fabrics -Process: Autoclave -Material: Epoxy/Carbon fiber -Carbon fiber reinforced plastic. -It achieves weight reduction for the whole front bumper assembly, while integrating the complex shape of the part. -Made with CFRP (Carbon Fiber Reinforced Polymer) through Autoclave process -Made of CFRP (Carbon Fiber Reinforced Polymer) throug...

Search Suppliers  Updated at: 2026/02/19

made by radial forging Drive shaft Stator shaft Rotor shaft Rotor shaft Radial forging is a type of free forging that strikes four hammers perpendicular to the axis of a cylindrical workpiece. By changing the mandrel, the inner diameter of a hollow shaft can be altered, enabling multi-step forging shapes in a single chucking operation. Furthermore, by designing the mandrel shape, features such as recesses can be machined within the inner diamete...

Search Suppliers  Updated at: 2026/02/16

AccuGear, Inc. USA Shareholders: Dauch Corporation Axle parts Cold forging Transmission gear Heat treatment Other brake parts Various machining Differential gear Hot forging Other airbag parts Cold and warm forging of net shape differential gears Machining of net shape differential gears Forging and machining of CVJ inner races Forging of net shape brake components ...

Search Suppliers  Updated at: 2026/02/03

Suzuki, Mr. Sho Yoshida, Mr. Michinori Takemura Pipe/Tube (Hard) Various processes Motorcycle parts Various machining Various surface treatments Magnet roller Photosensitive drum for copying machine Front fork Drawing process (Aluminum drawing pipe Titanium drawing pipe Housing-motor case) Iregular shape drawing process (Shaft material for timing pulley Cylinder-motor case) Cladding process (3-layer piping Combination of iron/stainless steel and ...

Search Suppliers  Updated at: 2026/02/02

in shaping the inside of the shaft, and low material yield. This process involves dividing the parts into pieces with different diameters in advance, processing these pieces, and then threading and diffusion bonding them together. This increases the ease of processing and the degrees of freedom in shape. It is also possible to use high-strength materials only in the areas that require strength. Threaded diffusion bonding is a patented technology...

Search Suppliers  Updated at: 2026/01/20

e company has developed a resin that can be plated. This is an area that Sumitomo Bakelite is currently focusing on. The company is able to provide most of the materials needed for power modules. This heat dissipation sheet is expected to replace potting material. It can be formed to conform to the shape of the board by heat pressing. It can also be used as a thermal conductive material between dissimilar materials. By encasing an electronic modu...

Search Suppliers  Updated at: 2026/01/19

nt / oriented magnet rotor (8 poles) Fan/circumferentially aligned magnet rotor (8 poles) Comparison of polar anisotropic magnet rotor (16 poles) and conventionally oriented magnet rotor Isotropic NdFeB bonded magnet Isotropic SmFeN magnetic powder compound These magnets are made using net-shape technology, which involves two steps of cold and hot pressing, rather than sintering the magnetic powder. During the pressing process, it is pos...

Search Suppliers  Updated at: 2026/01/16

ack Cylindrical Lithium-ion Battery Cell Lithium-ion battery cell (Cylinder) Lithium-ion battery cell (Cylinder) Lithium-ion battery cell (Prismatic) Semi-solid Battery Installed vehicle: Dongfeng JOYEAR S50 EV The product displayed was chargeable battery cell, distinguished by their cylindrical shape. These cells are widely used in various applications, from consumer electronics to electric vehicles, due to their durability, energy density, a...

Search Suppliers  Updated at: 2025/12/23

Air duct (Reference Exhibit) High expansion foam molding (Interior parts such as door trim) Lithium ion battery cells for automobiles (currently under development) Materials for battery housing Luminous PVB (Under development) Switches Materials for battery housing, Lithium ion battery cells Wedge-shaped interlayer film for head-up displays (HUD) Light transmissive polyolefin foam Button using electrostatic touch sensor Coloring on Carbon Fabric...

Search Suppliers  Updated at: 2025/12/16

of screw that incorporates a flat washer and an O-ring. In addition to stable waterproof performance even when misaligned, the screw can be fastened with a higher axial force.(Photo, information source: NITTOSEIKO Co., Ltd.) The company provides a new form of press-fit self-clinching studs. The new shape reduces burr, reduces warpage, and improves anti-warping strength.(Photo, information source: NITTOSEIKO Co., Ltd.) A press-fit pin with three l...

Search Suppliers  Updated at: 2025/11/27

ous kinds of automotive parts Aluminum parts by dual method of casting and forging Casting + Forging Parts mounted on the second-generation NSX VCU cover for Clarity Fuel Cell 3D printed parts made from PPS material Injection Molded Parts Mass production aluminum parts with "high strength + complex shape + no helium leak" by dual processes of casting and forging Material: PP Resin + talc, GF Process: Hot plate welding + burst test 1.4Mpa Materi...

Search Suppliers  Updated at: 2025/11/26

r battery related parts Other brake parts Other electric powertrain system parts Spring Busbar Torque converter parts Other seat parts Compression springs Tension springs Arc springs Torsion springs Wire forming EV busbars CTI symposium 2024 Busbars Hairpins Technical springs and bent wire parts Shape memory alloy The company currently owns the world's first system to bend PA12 coated aluminum sections up to 200 mm2. This technology allows us ...

Search Suppliers  Updated at: 2025/11/14

Gear Components Exhaust pipe components Engine components Press-formed parts (Automotive battery components) Press-formed parts (Hybrid vehicle capacitor parts) Press-formed parts (Automotive motor cover) to connect with other gear part Exhaust tail pipe lock Joint parts in the Engine With optimal shape proposals considering yield rate, achieves 33% lower material usage ・Applicable to iron-based, copper, and aluminum materials ・Processed via...

Search Suppliers  Updated at: 2025/09/11

norganic and aluminium) for high performance Lithium Ion batteries -High performance battery packaging film with high heat resistance, insulation and good formability -High performance anode binder with the company's acrylic emulsion technology -Additive material with large diameter and long fiber shape for higher performance ISO14001 ISO9001...

Search Suppliers  Updated at: 2025/09/04

0 kW@peak power 235 kW Maximum speed>20,000 rpm Six functions integrated in one unit: Motor control unit (SiC MOSFET inverter) On-board charger PDU DC/DC converter BMS Vehicle control unit The world's first generator unit featuring a dual rotor electric motor SOP 2025 Side sill: Energy efficient shape realizing reduction of maximum reaction force Bumper core: shape optimization with a two-stage load displacement balancing pedestrian safety and...

Search Suppliers  Updated at: 2025/08/18

Shanghai Han Technology Group Co., Ltd.（Formerly Shanghai HAN Molding Shape Co., Ltd.） China -Shareholder(s): Shanghai Hanshi Trading Co., Ltd. Other exterior parts Other seat belt parts Seat plastic parts Plastic injection molding Other sunroof, sunroof parts Bumper Various plastic molding Instrument panel ...

Search Suppliers  Updated at: 2025/07/29

his method. Length tolerance range is 0.10, and inner / outer tolerance range is 0.10. There is no concern about foreign matter in the knurled part, which is a concern during rolling, and the rolling process can be eliminated. Adopted to power sliding door, electric VVT and electric oil pump. Parts shaped by cold forging which can only be processed by pressing or cutting. In-house production of aluminum product processing and heat treatment. Adop...

Search Suppliers  Updated at: 2025/07/28

) (China) XT5 (FF) (China) XT5 (4WD) (China) K5 (FF) (China) Santa Fe (FF) (China) Santa Fe (4WD) (China) Seat comfort system Automotive Interiors Expo 2023 Fatigue early warning system Seat comfort system A sensor in the seat collects physiological signals generated by respiration, heartbeat, body shape and body movement. The comfort system covers the following four functions: pneumatic support, pneumatic massage, ventilation and heating ISO140...

Search Suppliers  Updated at: 2025/07/18

iloptics PVD metalization, lacquer laser technology, printing and Silmade Hard Coat coating. Flexilight with integrated, highly transparent silicone enabling homogeneous light outcoupling for uniform, wide-area lighting. These waterproof and impact-resistant optics can be adapted seamlessly to any shape (also 3D) and surface (e.g. leather). Headrest integration. (prototype) Silmade hard coat coating in combination with glass optic components. Hi...

Search Suppliers  Updated at: 2025/07/01