MarkLines Automotive Information Platform

GAZ, Nizhny Novgorod Plant[Russia]

cycle is 6.6 l/100 km with a manual transmission. GAZ Group and General Motors has agreed in February 2011 on the production and sales of the Aveo in Russia and invested $29 million in the existing plant of GAZ to install 43 welding robots and 33 welding jigs developed by GM Korea, refurbishing the coating line. The assembly line for the Aveo can produce eight Aveo units per hour. On April 9, the new GAZelle NEXT light commercial vehicle went int...

OEM Plants Updated at: 2026/03/26

Audi Hungaria Zrt., Győr Plant (formerly Audi Hungaria Motor Kft.)[Hungary]

ains such as the body shop for the PPE into existing structures at the Ingolstadt plant. An automation rate of 87% enables efficient assembly of body components for the Q6 e-tron series. The paint shop for the new fully electric series has been upgraded with an extended dryer post-CDC (cathodic dip coating) and automated hole-sealing. Robots now seal about 70 holes in the bodies after CDC, a task previously done manually, ensuring all parts reach...

OEM Plants Updated at: 2026/03/24

FAW-Volkswagen Automotive Co., Ltd.[China]

s reducing deionized water and recovering and reusing backwash water; increasing the frequency of use of circulating water; and reducing daily water consumption. In addition, the company is actively optimizing processes and promoting low-energy processes. Specifically, the company is optimizing the protective film used in transportation to reduce environmental pollution. On September 16, FAW-VW released its 2020/2021 Sustainable Development Repor...

OEM Plants Updated at: 2026/03/09

Tesla, Fremont Plant[USA]

ng in disappointed waiting customers. According to a permit application Tesla filed in September with the city of Fremont, California, the electric vehicle manufacturer plans to build a 4,000-square-foot tent in the south lot of its outbound logistics yard where finished vehicles will be wrapped in protective material for transit. In June, Tesla built a general assembly line for the Model 3 sedan at its Fremont plant underneath a massive outdoor ...

OEM Plants Updated at: 2026/03/04

Škoda Auto, Mladá Boleslav Plant[Czech Republic]

ents for electric Volkswagen Group vehicles Skoda to reveal all-new Octavia in November in Prague Volkswagen investing strongly in the future SKODA begins production of SKODA OCTAVIA at main plant in Mlada Boleslav Skoda names first all-electric SUV “Enyaq” SKODA AUTO to resume production with protective measures from April 27 SKODA previews ENYAQ iV- its first MEB-based production electric vehicle SKODA AUTO restarts production of its high-...

OEM Plants Updated at: 2026/02/13

LLC "Automobile Technologies" (former Peugeot Citroen Mitsubishi Automotiv Rus (PCAMA RUS)), Kaluga plant [Russia]

new flow control system was developed, and components were adapted for mass production. The procedures for updating parts and production systems were implemented, and the technical specifications of fasteners were verified. A new supplier was chosen for materials used in body preparation, including coatings and sealants. The quality control stations were upgraded, and major modernization was carried out in the welding, painting, and assembly area...

OEM Plants Updated at: 2026/01/08

Audi AG, Ingolstadt Plant[Germany]

rst human-robot cooperation at the VW Group to be applied in final assembly. At the A4/A5/Q5 assembly lines of the plant, a robot, known internally as PART4you, picks up components from the boxes and to pass them to the assembly workers. There is no danger to the workers because PART4you has a soft protective skin with integrated safety sensor and its intelligent system fulfills the special safety precautions for cooperating robots, the company s...

OEM Plants Updated at: 2025/12/09

FAW-Volkswagen Automotive Co., Ltd. Chengdu Branch[China]

s reducing deionized water and recovering and reusing backwash water; increasing the frequency of use of circulating water; and reducing daily water consumption. In addition, the company is actively optimizing processes and promoting low-energy processes. Specifically, the company is optimizing the protective film used in transportation to reduce environmental pollution. On September 16, FAW-VW released its 2020/2021 Sustainable Development Repor...

OEM Plants Updated at: 2025/07/14