an car factory, which will no longer assemble batteries, according to revised planning documents for the site in Gruenheide, Germany, according to local authorities on July 1. Changes to the Gigafactory Europe include relocation of drive production to a separate building, eliminating facilities for plastic component manufacturing, and new pile foundations for the press shop. Start of production of the Model Y crossover is ambitiously scheduled fo...

OEM Plants  Updated at: 2025/07/04

. All the scrap aluminium left over after cutting body parts is sent back to the supplier for recycling. The supplier then uses it to make new parts, closing a short recycling loop that dovetails ith Renault Group's circular-economy approach. Inside, the Megane E-Tech Electric has 28 kg of recycled plastic in the dashboard, centre console, seat covers and mats. The materials and metals in the Megane E-Tech Electric's electric battery are also rec...

OEM Plants  Updated at: 2025/07/04

ts trials on the use of this material in its modern facilities in Kocaeli. Isuzu started to test the part developed with this material, obtained from waste tea fibers, on the air duct of Kendo buses. It offers an environmentally friendly, robust, and reliable alternative that can be used instead of plastic in many areas. On July 21, Anadolu Isuzu announced that it has signed the UN (United Nations) Global Compact, one of the most important corpor...

OEM Plants  Updated at: 2025/07/04

. The Yaris is produced at the Valenciennes Plant in France. On March 31, Toyota Motor Europe announced that its production engineering teams, introduced the Toyota Global Paint Line (GPL) concept. This zero CO2 air make-up unit is a Toyota global first and was initially set up at the TMMF (France) Plastic shop. Following its success in CO2 emissions reduction it is now being considered by other manufacturing plants around the globe. In the new f...

OEM Plants  Updated at: 2025/07/04

Co., Ltd., plans to increase capital in Foshan Jinhui Hi-Technology Co., Ltd, a joint venture manufacturing diaphragm for lithium ion batteries and build a new plant in Foshu Industry Park, Sanshui Foshan. The ownership ratio in Foshan Jinhui Hi-Technology Co., Ltd. will be 48.125 percent by Foshan Plastic, 39.375 percent by BYD and 12.5 percent by Foshan Jinkeda. The 30,200-square-meter plant will be completed in 18 months. The new plant will bo...

OEM Plants  Updated at: 2025/07/03

he figures released on the company's official website or media coverage. They may be revised as appropriate when the data is updated. - As of June 2020, the production of vehicles in BYD-Xi'an High-tech plant has been discontinued. The plant is mainly engaged in the production of interior parts, plastic parts, fuel tanks, frame, shock absorbers, brakes, sunroofs, car light parts, and engines and supporting parts. - The company was established ...

OEM Plants  Updated at: 2025/07/03

f and Passat production will be affected from August 22-26; Kassel, where some segments of transmission and exhaust production will stop from August 25-29; Salzgitter, where some segments of engine production will cease from August 24-30; and Brunswick, where some segments of chassis components and plastic parts will be stopped from August 22-29. On October 27, Nissan Motor Company Ltd. announced that it will produce the next Qashqai and will add...

OEM Plants  Updated at: 2025/07/02

conducted its first carbon footprint assessment in 2020/21 and set specific GHG reduction targets. It plans to install solar PV systems at all its manufacturing facilities by 2024 which will supply up to 40% of the facilities' annual energy needs. It has launched an initiative to recycle all metal, plastic, paper, and other waste. A phase-out plan is currently being implemented across all manufacturing facilities to replace diesel with natural ga...

OEM Plants  Updated at: 2025/06/30

ronmental assessment information of the joint venture disclosed by Hubei Environmental Protection Bureau. The two companies will build a plant capable of producing 150,000 passenger vehicles a year in Huangjinkou, Hanyang District, Wuhan City, having a stamping, welding, coating and assembly lines, plastic processing facilities, engine production facilities and a research and development center. When it will be operational the plant will produce ...

OEM Plants  Updated at: 2025/06/30

model, the 500L Trekking, in April and a 3-row, 7-seat 500XL in May. Reportedly, Fiat’s vehicle production in Europe faces delays due to components shortage. Iveco’s plant in Spain and Maserati’s plant located neaｒ Turin have stopped production because Selmat Automotive stopped delivery of plastic components. The Iveco facility did not operate as of May 14, while Maserati’s plant was partially open. And the facility in Serbia, which bu...

OEM Plants  Updated at: 2025/06/26

n capacity of the "500" will be expanded from 500 to 750 units a day. Reportedly, Fiat’s vehicle production in Europe faces delays due to components shortage. Iveco’s plant in Spain and Maserati’s plant located neaｒ Turin have stopped production because Selmat Automotive stopped delivery of plastic components. The Iveco facility did not operate as of May 14, while Maserati’s plant was partially open. And the facility in Serbia, which bu...

OEM Plants  Updated at: 2025/06/25

nd Tavera BS III on 6th June due to potential emission performance of both models. The production of the Tavera BS-IV and the Sail petrol models is being continued. GM launched the Chevrolet Beat, which has given a face-lift. The driver's seat is high-adjustable and, like the steering wheel, silver plastic inserts are made on the dashboard. The selling price in Delhi is Rs 388,000-599,000. General Motors India announced on July 24 that it will re...

OEM Plants  Updated at: 2025/06/24

motor achieves a maximum efficiency of 96.8% and has been certified by China Automotive Technology and Research Center Co., Ltd. The hybrid electronic control system achieves a maximum efficiency of 98.8% and, thanks to the latest high-power IGBT chip and the OreoPACK double-sided heat dissipation plastic sealing technology, a two-thirds reduction in size and a 25% reduction in thermal resistance losses. The Wuling Motors globally pioneered elec...

OEM Plants  Updated at: 2025/06/24

motor achieves a maximum efficiency of 96.8% and has been certified by China Automotive Technology and Research Center Co., Ltd. The hybrid electronic control system achieves a maximum efficiency of 98.8% and, thanks to the latest high-power IGBT chip and the OreoPACK double-sided heat dissipation plastic sealing technology, a two-thirds reduction in size and a 25% reduction in thermal resistance losses. The Wuling Motors globally pioneered elec...

OEM Plants  Updated at: 2025/06/24

well as dies, automatic devices, robots and production line capital goods. Production capacity at the plant will increase from 80,000 to 115,000 units per year. On July 29, General Motors presented the first Chevrolet Tracker manufactured in Argentina, built at the company’s Rosario plant, at the Plastic Omnium plant which manufactures the bumpers for the Tracker. The Argentine-built Tracker has no differences from the same model produced at th...

OEM Plants  Updated at: 2025/06/23

ction process to deliver greener ultra-low-carbon automotive steel sheets to Beijing Benz. Beijing Benz has formulated the “Supply Chain 2039 Carbon Neutrality Action Plan” (the “Plan”). According to the Plan, the company will focus on the main raw materials and components (steel, aluminum, plastic particles, batteries, etc.) that emit large amounts of carbon dioxide during production, put forward carbon emission reduction requirements to...

OEM Plants  Updated at: 2025/06/23

022 Environmental, Social and Governance Report. According to the report, Geely Holding Group has adpoted recycled materials in its mainstream models. For example, the Geometry E uses recycled PET fiber, which has passed the GRS global recycling standard certification, in its cowl insulation, while plastic material filled with plant stalk is used to make the door fender; the body of the Zeekr 001 consists of 15% renewable steel sheet materials an...

OEM Plants  Updated at: 2025/06/23

(2023-, based on FAW Bestune T77, production suspended), Iskra (Planning); Xcite: X-Cross 7 (based on Chery Tiggo 7 Pro) (2024- ), X-Cross 8(based on Chery Tiggo 8 Pro) (2024-); Nissan Teana (2009-2015), X-Trail (2010-2022), Murano (2011-2022), Pathfinder/Terrano (2014-2016), Qashqai (2015-2022); Plastic Parts (-2022)，Press Parts (-2022) Lada (AvtoVAZ)'s vehicle assembly plant, former Nissan Rus plant - Number of employees: 1,578 (as of June...

OEM Plants  Updated at: 2025/06/23

PT. Honda Prospect Motor (HPM), Karawang Plant First Plant: CR-V (-2023), Freed (-2016), HR-V (2014-), HR-V e:HEV (2025-), Mobilio (2014-EOP) Second Plant: Brio (2014-), Brio Satya, BR-V (2015-), Jazz (=Fit) (-2021), Mobilio (2014-EOP), City Hatchback RS (2021-), WR-V (2022-) Engine, Body frame, Plastic injection molding, Stamped parts, Crankshafts Honda's plant in Indonesia - Number of Employees: 6,900 (as of February 2019) - Investment on vehi...

OEM Plants  Updated at: 2025/06/20

ated to Ankara. The Steyr plant will remain the production centre for truck assembly in the lightweight and medium weight series, but in the future, cab shells will no longer be manufactured at the site, but rather supplied by Munich. At the same time, the Steyr plant will see the creation of a new plastic painting plant. MAN Truck & Bus announced on September 8, 2015 that it will build a new cab paint shop at its Munich plant. The company will i...

OEM Plants  Updated at: 2025/06/20