On July 10, PJSC Sollers started serial production of diesel engines at the Sollers plant in the Alabuga SEZ. The maximum capacity of the enterprise is 50 thousand engines per year. The production lines of the plant are 95% automated. In the next two years, it is planned to master the production of cast iron castings, crankshafts, and a piston group. On July 31, Kama JSC opened pre-orders for the electric car "Atom". The car will be launched in 2...

OEM Plants  Updated at: 2025/12/17

rtime, starting the week of November 21 with parts supplies assured. Toyota announced on August 30 that it will invest USD 102 million and to increase 6-speed automatic transmission assembly and machining capacity by 20,000 per month in early 2015 at its Buffalo powertrain plant and Bodine Aluminum casting facilities in Missouri and Tennessee. This $90 million boost to Toyota Motor Manufacturing West Virginia, Inc. (TMMWV) will raise total plant ...

OEM Plants  Updated at: 2025/12/17

uarters. Nissan is not announcing launch dates, however engineering prototype trucks powered by the Cummins engine are currently undergoing extensive on-public-highway performance and durability testing. Titan will be built at Nissan’s Canton, Miss. vehicle assembly plant and its gasoline engines cast, forged and assembled at Nissan’s Decherd, Tenn. powertrain plant. On January 23, Nissan CEO Makoto Uchida announced a USD 250 million investme...

OEM Plants  Updated at: 2025/12/17

Plant (AAP) in Lincoln, Alabama celebrated the start of mass production of the all-new 2023 Honda Pilot, which includes the new Pilot TrailSport. The fourth generation Pilot features an all-new 3.5-liter V6 engine made exclusively at AAP. Working with the Anna Engine Plant in Ohio, responsible for casting and machining of the new blocks and cylinder heads, final assembly of the V6 engine is handled by at AAP. The 10-speed automatic transmission ...

OEM Plants  Updated at: 2025/12/17

announced on January 4 that it had acquired land for building an engine manufacturing plant for vehicles in Indonesia. The land purchased is about 1.3 million square meters in the industrial park to the east of Jakarta at a cost for about 10 billion yen. Suzuki will construct a plant to manufacture casting, forging and aluminum-die cast parts, aiming to raise their localization rate. Suzuki is planning to set up a new assembly plant in Indonesia....

OEM Plants  Updated at: 2025/12/16

announced on January 4 that it had acquired land for building an engine manufacturing plant for vehicles in Indonesia. The land purchased is about 1.3 million square meters in the industrial park to the east of Jakarta at a cost for about 10 billion yen. Suzuki will construct a plant to manufacture casting, forging and aluminum-die cast parts, aiming to raise their localization rate. Suzuki is planning to set up a new assembly plant in Indonesia....

OEM Plants  Updated at: 2025/12/16

n Győr, where it is being installed in drives designed for the purely electric Porsche Macan and Audi Q6 models. Volkswagen has invested EUR 46 million in the production of the PPE differential in recent years. The investment also introduced new technologies. One of these is laser welding steel to cast iron without using a protective atmosphere or filler material. The other is vacuum hardening. On July 10, Audi Hungaria announced that it has sta...

OEM Plants  Updated at: 2025/12/16

Audi AG, Munchsmunster Plant Stamping parts, Body parts, Machining chassis components, Suspension parts, Aluminum die-casting parts Audi's plant, VW Group - Number of employees: over 700 (as of March 2025) - Production Output:   2024: approximately 15 million automotive parts   2023: approximately 17 million automotive parts - Established in 2013 Audi upgrades Ingolstadt plant for Q6 e-tron PPE platform production Audi to expand producti...

OEM Plants  Updated at: 2025/12/09

rkets. The Components factory in Kassel delivers the electric drives and platform parts for the ID.4 and other MEB vehicles for Europe and North America. The core elements – rotor and stator – are delivered by the components factory in Salzgitter. Motors, gearboxes and intermediate housings are cast at the sites in Hannover, Poznań and Kassel. All of the components belonging to an electric drive, including the 1-gear transmission from Kassel...

OEM Plants  Updated at: 2025/12/09

rkets. The Components factory in Kassel delivers the electric drives and platform parts for the ID.4 and other MEB vehicles for Europe and North America. The core elements – rotor and stator – are delivered by the components factory in Salzgitter. Motors, gearboxes and intermediate housings are cast at the sites in Hannover, Poznań and Kassel. All of the components belonging to an electric drive, including the 1-gear transmission from Kassel...

OEM Plants  Updated at: 2025/12/09

off the production line at the Changsha plant. The eBUS-12 uses the new aluminum body supplied by Alcoa, a major aluminum maker in the U.S., which reduces the body weight by 40 percent (1 ton) compared with the conventional steel body. The electric-powered bus also uses other Alcoa products such as cast wheel and fasteners, which contribute to a total weight reduction of 1.2 tons. As a result, the range on a single charge has been extended to 300...

OEM Plants  Updated at: 2025/12/09

up for battery production for new all-electric EQ models will start here. On May 9, Mercedes-Benz presented the first results of its low-carbon-technology roadmap. Following a successful testing phase of low-carbon aluminum with a minimum 25% share of post-consumer scrap, it is bringing structural cast components made of the more sustainable material into series production this year. The aluminum comes with a carbon footprint of just 2.8 kg CO...

OEM Plants  Updated at: 2025/12/01

BMW AG, Landshut Plant Engine parts, Interior & Exterior components, CPRF parts, shafts, special engines, exchange engines, aluminum casting parts, Cockpits; Electric motors and a range extender, and motor gear units for BMW i & MINI, electric drive modules, body parts from CFRP and aluminium; Electric drive housing for iX3 & iX5 Hydrogen; Hydrogen-electric drive train for BMW i Hydrogen NEXT (2022-); Aluminum housing for electric drive units (20...

OEM Plants  Updated at: 2025/11/27

is 5.2 sec. Maserati displayed its new "Quattroporte Sports GTS" at the 2007 Frankfurt Motor Show. The model has features including a 6-speed automatic transmission, reinforced suspensions and lower body height by 10mm in the front and 25mm in the rear than the previous model. It also adopts "Dual-cast discs" jointly developed with Brembo. They are brake discs made of cast iron and aluminum, which can maintain high braking performance under high...

OEM Plants  Updated at: 2025/11/27

General Motors Canada, St. Catharines Plant 3.6-liter V6 engines (-2024); 5.3-liter and 6.2-liter V8 engines; including aluminum blocks, cranks, heads, rods and cams, cast-iron blocks; 6-speed AT (-2024), 8-speed DCT; Ultium electric drive units (2027-planning) Engine assembly plant -Employees as of July 2023: 1,100 -Investment since 2005: CAD 1.85 billion -Year opened: 1952 GM Canada aims to build EV drive units at St. Catharines Propulsion Plan...

OEM Plants  Updated at: 2025/11/27

company continued to build the Big Thumb for markets overseas and has exported around 70,000 units including knockdown kits by 2014. UD Trucks Corporation and UniCarriers Holdings agreed on the sales of UD Trucks’ Konosu Plant on October 2, 2014. The Konosu Plant manufactures cylinders and other cast components for diesel engines. Currently, most of its products are for forklifts. The sales of the plant will allow UD Trucks to focus on truck a...

OEM Plants  Updated at: 2025/11/25

develop this vehicle. Preparations are already underway in Landshut for the fuel cell system that will be used in the BMW i Hydrogen NEXT. On May 23, BMW announced that its Landshut plant has long utilized additive manufacturing, especially for creating moulds for aluminum cylinder heads using sand casting. This process enables the creation of complex structures filled with liquefied aluminum. The Lightweight Construction and Technology Centre in...

OEM Plants  Updated at: 2025/11/21

livered by the plant. On April 16, XPeng unveiled the SEPA 2.0 all-domain intelligent evolving architecture, a high-end intelligent ultimate technical architecture for electric vehicles, before unmanned driving is realized. With SEPA 2.0, the only mass-produced front and rear one-piece aluminum die-cast vehicle body in China, which reduces overall weight by 17%, was built. SEPA 2.0 features the CIB (Cell Integrated Body) technology and is compati...

OEM Plants  Updated at: 2025/11/21

s for EV production at both MAP and East Liberty Auto Plant (ELP). The Anna Engine Plant (AEP) will now build the IPU case that will contain the EV battery module and serve as the main frame structure for the floor of Honda and Acura EVs. AEP is preparing to install six, 6,000-ton high-pressure die cast machines that will mega cast the IPU case in two pieces that will be welded together seamlessly using Friction Stir Welding. In 2023, AEP transfe...

OEM Plants  Updated at: 2025/11/20

Toyota Motor Manufacturing, Tennessee (TMMTN) Aluminum Castings: Cylinder blocks, AT parts, Hybrid transaxle cases Toyota's aluminum casting plant - Changed name from Bodine Aluminum to Toyota Motor Manufacturing, Tennessee (TMMTN): 2020 - Employees as of September 2025: 450 - Investment: USD 497 million - Established in 2003 Toyota to invest USD 102 million and to increase 6-speed automatic transmission assembly and machining capacity Toyota ...

OEM Plants  Updated at: 2025/11/20