r 800V and above platforms. The table can be scrolled left and right. Increased dielectric strength requirements As voltages increase, insulation systems are required to have both high electrical performance (corona discharge life, dielectric breakdown field strength, low dielectric loss) and thermal performance (thermal conductivity, heat resistance, resistance to degradation). Material upgrades: Fillers with high dielectric breakdown fiel...

Market & Tech Reports  Updated at: 2025/12/23

aracterized by powerful body lines and based on a "future classic" exterior design concept. Two rear styling specifications are available: "rear box version" and "spare tire version.”   The powertrain is equipped with the company's proprietary "Golden Range Extender" technology, which achieves a thermal efficiency of 45.79%. 1L can generate 3.71kWh of electricity. Equipped with a 34.3kWh lithium iron phosphate battery, the vehicle has a pure e...

Market & Tech Reports  Updated at: 2025/12/16

e batteries. Qkera, for instance, a start-up at the Technical University of Munich, has developed new electrolyte components consisting of a lithium ion-conducting ceramic-oxide material that has achieved a 30 to 50 % higher energy density than conventional batteries. Solid-state electrolytes are thermally more stable and are less susceptible to thermal runaway, which can cause fires in lithium-ion batteries. They can withstand higher temperatu...

Market & Tech Reports  Updated at: 2025/12/05

S) Toyota Battery Co., Ltd. Toyota Industries Corporation AESC Group Ltd. Vehicle Energy Japan Inc. Blue Energy Co., Ltd. GS Yuasa International Ltd. Toshiba Corporation Outside Japan LG Energy Solution Ltd. SK ON Co., Ltd. Samsung SDI Co., Ltd. Automotive Cells Company SE Verkor SA Northvolt AB Thermal Management of BEV Batteries (Europe, U.S. and China Markets) Lithium-Ion Battery (Chinese Market)    This three-part report describes trend...

Market & Tech Reports  Updated at: 2025/12/01

s such as the Naxtra sodium-ion battery and the Freevoy Dual Power Battery. Shenxing Pro battery NP 3.0 safety technology and two versions of Shenxing Pro   A key feature of CATL's "NP 3.0" safety technology is that it can continue to supply high voltage for more than an hour even after thermal runaway, preventing fire and smoke and meeting the high safety requirements of autonomous driving levels 3 and 4. Based on this technology, th...

Market & Tech Reports  Updated at: 2025/09/29

solid-state battery industry   Currently, the energy density of liquid lithium batteries is already approaching the theoretical bottleneck of 350Wh/kg. High energy density material systems present a serious safety challenge, and the flammable electrolyte and separators are the main heat source for thermal runaway. Solid-state batteries are also considered the ultimate solution, with energy density potentially exceeding 500Wh/kg in the future. Fu...

Market & Tech Reports  Updated at: 2025/08/22

an AI BMS. The system monitors battery status in real time and predicts battery life. It intelligently optimizes energy efficiency and replenishment strategies based on user charging habits and usage scenarios.  Furthermore, the battery itself features quadruple insulation of the battery cells and thermal runaway suppression technology.   Huawei GAC Toyota models are equipped with Huawei's DriveONE electric drive system. Through compact desi...

Market & Tech Reports  Updated at: 2025/07/22

ex Ltd.’'s lightweight resin battery covers for electric vehicles can both reduce the number of parts and significantly reduce weight. The battery case cover is made of resin to reduce weight. Not only is it fire-retardant from the outside, it is also resistant to internal fires (so-called thermal runaway). Full composite plastic battery housing with excellent shock absorption and fire resistance   Martinrea Automotive Japan K.K.: Li...

Market & Tech Reports  Updated at: 2025/06/27

eo City, Saitama Prefecture) In production: EV battery holding sheet (Toyota BEV bZ4X) Material: Silicone rubber Uni Mount using two types of rubber Combines soft ride comfort with strong displacement control Fujikura Composites Inc. (Shinagawa Ward, Tokyo) Battery caseExplosion-proof seal Uses thermal expansion fire-resistant heat insulatorLithium ion battery sealed in 10 seconds to extinguish fire in case of thermal runaway   All solid-...

Market & Tech Reports  Updated at: 2025/06/19

t structure and delivery status of major lithium-ion battery companies IV. Emerging NEV lithium-ion battery manufacturers V. Status of Non-Chinese lithium-ion battery companies in China CATL FinDreams (BYD) Gotion High-tech CALB EVE Energy SVOLT Energy Sunwoda LG Energy Solution Panasonic Thermal Management of BEV Batteries (Europe, U.S. and China Markets) Lithium-Ion Battery (Japan, Europe, North America and Korea)    In 2024, the p...

Market & Tech Reports  Updated at: 2025/06/12

ated output 12,000WMaximum speed: 160km/hVehicle weight: 250kgLithium iron phosphate battery 320V / 20AhMaximum range: 125km Lithium iron phosphate battery 320V / 20AhThe battery uses lithium iron phosphate for the positive electrodes. They are inexpensive, have a long life, are less susceptible to thermal runaway, are highly safe, and can shorten charging times. On the other hand, the cell voltage and energy density are somewhat lower, resulting...

Market & Tech Reports  Updated at: 2025/04/15

lithium salts, battery materials, midstream battery manufacturing, and comprehensive downstream recycling of waste batteries. In November 2024, Changan jointly announced membrane-free solid-state battery technology with Chongqing Talent New Energy Co., Ltd. This technology effectively suppresses thermal runaway caused by factors such as high temperature and overcharging.   Deepening cooperation with CATL   In November 2024, Changan signed...

Market & Tech Reports  Updated at: 2025/03/12

o successfully prototype a continuous ribbon with a 0.1mm thickness × 80mm width × 80m length in air with a 5-second spray with a yield of over 90%. On display at the expo were 80mm wide foil strips and laminated cells made by the single roll rapid solidification process.   Fujikura Composites: Thermal expansion fire-resistant materials, explosion-proof valves, heat-dissipating rubber, liquid detection sensors Fujikura Composites Inc. exhibi...

Market & Tech Reports  Updated at: 2025/02/28

es Sumitomo Bakelite Co., Ltd.(Shinagawa Ward, Tokyo) Prototype: e-Axle Motor housing Thermosetting composite (long fiber reinforced) Inverter housing Thermosetting composite (long fiber reinforced) Nickel silver plating, electromagnetic shielding Stator (EV motor)Encapsulation material High thermal conductivity epoxy resin Insulation and heat dissipation Rotor (EV motor)Magnet fixing material Epoxy resin M630 Vibration resistance, high ...

Market & Tech Reports  Updated at: 2025/02/14

ybrid transmission 1+1 high-efficiency electric hybrid transmission P2.5 P1+P2 P1+P3 P1+P3 European style For global markets High-level performance Ultimate energy consumption/cost PHEV/ICE HEV/PHEV PHEV/REEV PHEV/REEV (Source: Created by MarkLines based on the presentation content)   The thermal efficiency of the Leishen hybrid engine is planned to increase from 43.32% in 2021 to 46.5% in 2024 and to more than 50% in the future. In add...

Market & Tech Reports  Updated at: 2024/12/12

arch 2023. The batteries will not ignite even if exposed to gunshot and are equipped with an electrode interface that reduces the rate of cell temperature rise by 20%, a heat-resistant phase change material that improves insulation performance by 40%, and a cell fire extinguishing system to prevent thermal runaway. The P58 microcrystalline battery, based on microcrystalline technology, was announced in December 2023. Even when the cell is punct...

Market & Tech Reports  Updated at: 2024/10/30

tion of LiB technology Japan Panasonic Energy Prime Planet Energy & Solutions (PPES) Toyota Industries Corporation AESC Group Vehicle Energy Japan Blue Energy GS Yuasa Toshiba   Outside Japan LG Energy Solution SK ON Samsung SDI Northvolt ACC Verkor   Click here for Analysis Report: Thermal Management of BEV Batteries (European, American and Chinese Markets) Click here for Analysis Report: Lithium-Ion Battery (China) This three-...

Market & Tech Reports  Updated at: 2024/10/18

ted by MarkLines based on the content of the presentation)   Hybrid-specific engines prioritize economy, and for naturally aspirated or turbocharged engines, the main focus is on highly efficient combustion, ultra-low friction, and highly efficient heat management technology. The maximum available thermal efficiency is approaching the theoretical limit. In this environment, it is necessary to create cost-effective products that meet the main nee...

Market & Tech Reports  Updated at: 2024/08/16

EV lithium-ion battery manufacturers V. Status of Non-Chinese lithium-ion battery companies in China VI. Development trends of lithium-ion battery technologies for NEVs in China CATL FinDreams (BYD) Gotion CALB EVE Energy SVOLT Energy Sunwoda LG Energy Solution Panasonic   Click here for Thermal Management System of BEV Batteries (European, American and Chinese Markets) See Analysis Report: Lithium-Ion Battery (Japan, Europe, North Ame...

Market & Tech Reports  Updated at: 2024/07/25

nd modules, battery life extension and safety, and charging systems. Automotive Engineering Exposition 2024Venue entrance Nissan Ariya EV powertrain   Analysis Reports：Lithium-Ion Battery 関連レポート： Toyota Business Fair 2024: EV Technologies, Carbon Neutrality (Jun. 2024)BEV Thermal Management System Benchmarking (Apr. 2024)Smart Energy Week Spring 2024 (2): Battery-related Technologies (Apr. 2024)Automotive World 2024: El...

Market & Tech Reports  Updated at: 2024/07/10