ty valve mechanism that prevents hydrogen gas from being filled if the connection is not made correctly, an On/Off indicator that allows for visual confirmation of the connection, a color indicator that allows for confirmation of the pressurized state (blue to red when pressurized), and also uses a purge line to prevent freezing during filling. The 35MPa filling nozzle (HHV-3SS-H35-NI-ASL) is used to fill 35MPa vehicles such as forklifts with hy...

Market & Tech Reports  Updated at: 2024/10/29

ism" that prevents hydrogen gas filling if not connected properly, an "ON/OFF indicator" that allows visual confirmation of connection, a "color indicator" that allows confirmation of pressurization status (blue to red under pressure), and other features. (blue to red when pressurized), etc., and a purge line to prevent freezing when filling. The 35MPa high-pressure hydrogen charging coupler is used to charge hydrogen to 35MPa vehicles such as f...

Market & Tech Reports  Updated at: 2022/09/21

valves. Three types of hydrogen filler nozzles were on display, with an IR device embedded in the nozzle's insertion part to indicate the tank capacity. In the new model (TK19 H2 70MPa ENR) on the far right of the photo, it is easy to replace the IR device in case of failure or damage, and it has a purge line to provide protection from freezing. Exhibit of valve products for FCVs Weh’s hydrogen filler nozzle ------------------ Keyword...

Market & Tech Reports  Updated at: 2022/04/08

operation, a "safety valve mechanism" that prevents hydrogen gas filling if not correctly connected. It is also equipped with an "ON/OFF indicator" that enables visual confirmation of the connection state, and a "color indicator" (blue to red when pressurized) to check the pressurized state, and a purge line to prevent freezing during filling. The H70 receptacle is adopted in Toyota's new Mirai   The 35MPa high-pressure hydrogen filling coupler...

Market & Tech Reports  Updated at: 2021/10/26

half of the market share in Japan.   Three types of hydrogen refueling nozzles were on display, with IR devices embedded in the mating parts of the nozzles to show the tank capacity. The new model on the right (TK19) has easy to replace IR devices in the event of a failure or damage, and it has a purge line to prevent freezing. Hydrogen refueling nozzle New hydrogen refueling nozzle model TK19   IHI Corporation exhibited a next-gener...

Market & Tech Reports  Updated at: 2021/03/17

PHEVs when the ICE takes over or is left unused for an extended period. The supplier Vitesco Technologies sees a number of new requirements emerging in the area of thermal management for exhaust systems. For instance, electrically heated catalytic converters have become relevant, as well as active-purge pumps that not only empty the tank’s activated carbon filter, but can also supply an airstream or an air-fuel mixture for heating. NOx sensors...

Market & Tech Reports  Updated at: 2020/09/18

Engine electrical components Engine starter motor Valeo Alternator Denso Battery VARTA Battery current sensor Hella Battery tray DRÄXLMAIER Transmission Assy ZF Half shaft GKN Fuel components Fuel tank Kautex Textron Fuel level sensor Continental Carbon canister KAYSER Canister purge valve BOSCH Intake system Intake duct behind the grille MAHLE Surge tank and related ducts MAHLE Air cleaner box MAHLE Exhaust Muffler B...

Market & Tech Reports  Updated at: 2020/04/16