Hero MotoCorp Ltd.) at 5.9 million units (24.7% share) and Honda at 5.86 million units (24.5%), followed by TVS (TVS Motor Company Limited) at 4.65 million units (19.5%) and Bajaj (Bajaj Auto Limited) at 3.97 million units (16.6%).   Reference reports:  Indian two-wheeler production and plant capacity analysis (Jun. 2024)  Electric Two-wheelers in India (1) Policies and Market Overview (Jul. 2024)  Electric Two-wheelers in India (2) Major sta...

Market & Tech Reports  Updated at: 2025/12/25

tablet. The IVI display is horizontally long and its vertical dimension is small, making it difficult to display touch switches for climate climate control, etc. at all times, so the main switches for these controls are located outside the IVI display. These switches are capacitive for visual simplicity. Figure 5: Nissan Leaf(Photo by MarkLines @ 2025JMS) The 14.3-inch IVI display and 12.3-inch meter display are combined to look like a...

Market & Tech Reports  Updated at: 2025/12/15

800kW, a maximum current of 800A, and millisecond-level overcurrent protection, making it safe and highly efficient. In addition, the lightweight charging cable design allows one-handed operation. According to the data, XPeng's high-voltage compatible models have a significantly higher charging capacity ratio at ultra-fast charging stations than regular models, and user satisfaction is also higher.   In the usage scenario at charging stations, t...

Market & Tech Reports  Updated at: 2025/12/02

approved for exemption from EPA federal regulations) CAFE Corporate Average Fuel Economy (established by EPA) CBG Compressed bio gas CFP Carbon footprint of product CNG Compressed natural gas CO2 Used to refer to all greenhouse gases GHG Greenhouse gas GWh Annual production capacity of cell plants, gigawatt-hours; “/year” omitted IRA Inflation Reduction Act (USA) LLC Limited Liability Company NACS North American ...

Market & Tech Reports  Updated at: 2025/12/01

iver from the vehicle has increased dramatically. One of the elements for constructing such a system is the improvement of information processing speed.   In the Internet world, cloud-based back-end processing systems have been used to compensate for the limitations of terminal-side processing capacity. The Internet connection speed is becoming a bottleneck for processing capacity, and this is changing to edge computing, a system that improves t...

Market & Tech Reports  Updated at: 2025/11/11

to its sites in China and Southeast Asia to increase its cost competitiveness. According to its 2025 business plan (mid- to long-term management plan), the company is positioning safety system products, mainly airbags, as a priority business, and planned to increase its global airbag production capacity to 100 million units per year in 2023, approximately 1.6 times the FY2018 level. (Achievement or non-achievement not disclosed.) Its “2030 Busi...

Market & Tech Reports  Updated at: 2025/10/27

25 that it will dissolve and liquidate Fuzhou Koito Tayih Automotive Lamp Co., Ltd. The liquidation is scheduled to be completed in the first quarter of the fiscal year ending March 31, 2027. Now, the company will review its three-base organization in China, aiming to optimize excess production capacity and concentrate and streamline management resources. 1996: Fuzhou Koito Tayih Automotive Lamp Co., Ltd. (Fuzhou Koito) was established in Fuzho...

Market & Tech Reports  Updated at: 2025/10/20

trified vehicles (xEVs) is bringing about two changes to air conditioning systems. The first is the increased adoption of electric compressors. The compressor in ICE vehicles is powered by engine rotational power via belts and pulleys, while in BEVs and PHEVs the compressor is now powered by electricity. For HEVs, the engine is stopped when the vehicle is driven by the electric motor, so electricity is still required as a power source for the com...

Market & Tech Reports  Updated at: 2025/10/07

.   In FY2024, in addition to Toyota Boshoku's continued efforts in India and Indonesia, there were efforts by Tachi-S and TS Tech to strengthen competitiveness. (Details below) Amidst the activities, including overseas expansion, of Japanese seat suppliers, Namba Press Works Co., Ltd. (Kurashiki city, Okayama Prefecture) withdrew from the seat business at the end of 2017. As Mitsubishi Motors, one of its major customers, had been shifting its ...

Market & Tech Reports  Updated at: 2025/09/27

Astemo: The company was launched in January 2021. The original ownership ratio was 66.6% for Hitachi, Ltd. and 33.4% for Honda Motor Co., Ltd. Four companies, Hitachi Automotive Systems, and Keihin Corporation, Showa Corporation, and Nisshin Kogyo Co., Ltd., the three of which were affiliated with Honda, had integrated their operations. Power steering systems are handled by the Hitachi Automotive Systems and Showa successors. In September 2023,...

Market & Tech Reports  Updated at: 2025/09/18

Honda’s total capital investment amount will be reduced from JPY 10 trillion to JPY 7 trillion by the fiscal year ending March 31, 2031. Restructuring its battery production system   In May 2025, Honda announced that it would review its plans for a next-generation fuel cell module plant in Moka City, Tochigi Prefecture. The plant has been aiming to start operations in FY2027 to produce 30,000 next-generation fuel cell modules per year, but in...

Market & Tech Reports  Updated at: 2025/09/03

d next-generation technologies to be used in the Honda 0 series, and Suzuki Motor Corporation (Suzuki) exhibited Suzuki's exhibit on demonstration testing for the development of BEV mini-trucks (<660cc) attracted the attention of event participants.   This report introduces the exhibits of Toyota, Honda, Subaru, Mazda, and Suzuki at the Automotive Engineering Exposition 2025 (JSAE 2025 in Yokohama).   Related reports:Toyota Business Fair 2025: ...

Market & Tech Reports  Updated at: 2025/06/25

design the optimum catalyst effect and back pressure (exhaust side pressure) for each engine. The exhaust pipes and tubes including the muffler and silencer, the shell shape of the catalytic converter, the pipe length, branching shape, inner wall condition of the exhaust manifold, and the heat capacity of the exhaust path are also important design items to be tuned in the restricted layout under the vehicle floor.   In addition, stricter regula...

Market & Tech Reports  Updated at: 2025/06/19

cturing facilities in Indonesia, (ii) Companies that have invested in ICE car manufacturing facilities in Indonesia and will switch production to EVs, either in part or in whole, and/or (iii) Companies that have invested in EV manufacturing facilities in Indonesia by increasing production plans/capacity. Luxury goods sales taxfor HVs On December 16, 2024, the Indonesia’s Coordinating Ministry for Economic Affairs announced that the government...

Market & Tech Reports  Updated at: 2025/06/13

s. All Mazda models, with the exception of the Mazda 2, are equipped with four-wheel disc brakes.   On the other hand, Daihatsu and Suzuki, whose main production models are mini-vehicles and small cars in the B segment and below, have many models with drum brakes.   In between are Toyota, Nissan, Honda, and Mitsubishi. Many of Mitsubishi's mini-cars and small commercial vehicles for the Japanese domestic market are equipped with drum brakes. Fo...

Market & Tech Reports  Updated at: 2025/05/29

Bangkok International Motor Show 2025 (2) Japanese & European OEMs Mitsubishi, Mazda, Honda, Nissan, Suzuki, Isuzu, and others Summary Mitsubishi: Xforce HEV Mazda: Iconic SP compact electric sports car Honda: e:N1 and City Hatchback DRIVAL Nissan: Serena e-POWER Suzuki: Swift and Carry Isuzu: Dragon Max pickup truck Toyota: Hilux Champ, Lexus RX 450h+ PHEV Ford: Everest Sport Special Edition Hyundai: N Line Series Volvo: XC90 PHEV and EX90 BEV ...

Market & Tech Reports  Updated at: 2025/05/08

Auto Shanghai 2025: Japanese OEMs Electrified vehicles from Toyota, Honda, Nissan, and Mazda Summary Toyota: World premiere of the Lexus ES and bZ7 with Huawei technology Honda: World premiere of the flagship model of the Ye series, equipped with DeepSeek Nissan: Unveils PHEV pickup truck for the first time and announces investment of approximately JPY 200 billion in the Chinese market Mazda: Unveils second NEV model, EZ-60, to be released in 202...

Market & Tech Reports  Updated at: 2025/05/07

vehicles as a percentage of sales volume 45.1% 44.8% 43.0% 41.4% 35.1% 36.5% 39.0% (Source: MarkLines U.S. sales and import volumes (as of April 2025))     New vehicle sales in the U.S. totaled approximately 16.49 million units (in 2024), with market shares of 35.9% for Japanese OEMs (Toyota, Honda, Nissan, Subaru, Mazda, etc.), 33.6% for American OEMs (GM, Ford, Tesla), 18.3% for European OEMs (Stellantis, VW, BMW, Mercedes-Benz, etc.), an...

Market & Tech Reports  Updated at: 2025/05/02

the expansion project will introduce advanced production equipment and technology, and through the integration of digitalization and automation, will significantly improve production efficiency and continuously optimize product quality. In September 2023, the Chubu Office, which was set up in Chita City, Aichi Prefecture, Japan, opened. It will engage in the manufacturing of airbags and steering wheels. In August 2023, Autoliv (Guangzhou) Vehicle...

Market & Tech Reports  Updated at: 2025/04/24

ck cellsDisplay panel for large-scale water electrolysis system   Dioranm of Denso Fukushima plantHydrogen burnerDisplay panel of carbon neutrality initiatives at Denso Fukushima plant The plant of Denso Corporation group company Denso Fukushima Co., Ltd. (Denso Fukushima) uses electricity generated from solar and wind power to produce hydrogen through a water electrolyzer that produces hydrogen for use in the plant. Along with a di...

Market & Tech Reports  Updated at: 2025/03/21