nents, with its main businesses being seat systems, interior systems and exhaust systems. In April 2019, the company announced the establishment of a new business group, Faurecia Clarion Electronics, based in Saitama, Japan. The new business group will focus on cockpit electronic components and low-speed ADAS products businesses. In October 2018, Faurecia announced the acquisition of Clarion from Hitachi, Ltd. and others; Clarion became a wholly ...

Market & Tech Reports  Updated at: 2025/06/19

and cost.   Bosch and Arbe Robotics have outsourced chip production to GlobalFoundries Inc. in the U.S. As for radar devices, high-performance versions are also beginning to show signs of being heavily concentrated. The common key to high performance is the signal processor, which both offers high speed calculations and low power consumption, achieving both cost and performance. There are also new initiatives such as the optimal design of the pa...

Market & Tech Reports  Updated at: 2025/06/17

n of e-POWER Gen 1 e-POWER Gen 2 e-POWER   e-POWER is a series hybrid system in which the engine drives a generator to generate electricity, which is then used to drive the motor. On display at the venue was the complete electric powertrain, including the engine, generator, drive motor, reducer/speed increaser (gearbox), and inverter.   The first-generation e-POWER was installed in the Note launched in 2016 and the Serena launched in 2018, w...

Market & Tech Reports  Updated at: 2025/06/16

ks Toyota Prius HatchbackHV The fifth-generation Prius was launched in July 2024. It shares the same hybrid engine with the Corolla Cross Hybrid. Hilux Rangga Pickup truck The Hilux Rangga was unveiled in October 2024. It comes with a 2.0L gasoline engine or 2.4L diesel engine, paired with a 5-speed manual transmission or a 6-speed automatic transmission. Its prices start at IDR 188 million for the gasoline engine version and IDR 244 million...

Market & Tech Reports  Updated at: 2025/06/13

which separates the top and bottom of the vehicle body, enables the Bedrock Chassis to absorb 85% of the collision energy of the entire vehicle (a normal chassis can only absorb around 60% of the collision energy), preventing ignition, explosion, or dispersion even in a center pillar collision at a speed of 120km/h.   3. Gradual penetration of new technologies through battery structure upgrades 1) Lamination technology:   Although it has an adv...

Market & Tech Reports  Updated at: 2025/06/12

rive motor.   Aeolus L7 PHEV version, Aeolus L7 co-creation version   The PHEV version of the Aeolus L7 is positioned as a compact coupe SUV. It adopts the Mach E super hybrid powertrain system. The powertrain combines a 1.5L turbo engine, a drive motor with maximum output of 100kW, and 4-speed DHT transmission. The co-creation version of Aeolus L7 was exhibited as an innovative outcome of the "user co-creation" plan, and debuts the lea...

Market & Tech Reports  Updated at: 2025/06/12

height 1,427mm with a wheelbase of 2,922mm. Developed based on the new PPC (Premium Platform Combustion), it comes standard with a 5-link suspension front and rear. It is equipped with the 5th-generation EA888 Evo5 engine with a maximum output of 200kW and maximum torque of 400Nm. Combined with a 7-speed S-tronic transmission and MHEV Plus. It is equipped with a continuously variable damper control (CDC) suspension system and a smart four-wheel d...

Market & Tech Reports  Updated at: 2025/06/11

. Both vehicles are Class 8 trucks, through the T680E is designed for regional- and short-haul, drayage, and Less Than Truckload (LTL) freight applications, while the T880E is designed for vocational uses. Both trucks use the new PACCAR integrated ePowertrain platform, featuring an integrated three-speed transmission with a central eMotor for improved efficiency. The ePowertrain's motor is optimized for regenerative braking to improve range. Both...

Market & Tech Reports  Updated at: 2025/06/06

70kW. Powered by CATL's (Contemporary Amperex Technology Co., Ltd.’s) Xiaoyao battery, it has an EV-mode cruising range (CLTC mode) of 380km. It supports a 6C charging rate. Charging time is from 20% to 80% is 9 minutes. Acceleration from 0-100km/h is reached in the 3 second range and the maximum speed is 240km/h. It is equipped with dual-chamber air suspension, a continuously variable twin-damping control system, and a 48V active stabilizer ba...

Market & Tech Reports  Updated at: 2025/05/30

lso offer optional frame drilling configurations for frame-mounted or back-of-cab mounted CNG fuel tanks.   Cummins' X15N engine on the Freightliner Cascadia Natural Gas truck provides 450 hp at 1,600 rpm, and 1,750 lb-ft of torque at 1,100 rpm. It will be paired with the Eaton Cummins Endurant 12-speed automated manual transmission. The X15N is certified at 50 mg NOx bhp/hr and has CO2 and NOx levels 90% below current EPA standards. When using ...

Market & Tech Reports  Updated at: 2025/05/29

axle parking under U.S. state regulations, rear-wheel parking is now easier to lay out, even for front-wheel drive vehicles. According to Japanese regulations, static performance is regulated on an unmanned 20% gradient, and dynamic performance requires 27m stopping distance from an initial braking speed of 30km/h on level ground (deceleration of approximately 0.15G). Electric parking brake (EPB) In recent years, deregulation has led to the rapi...

Market & Tech Reports  Updated at: 2025/05/29

be around 600V to 700V).     Development of MCF high power density motor (Source: MCF Electric Drive)   MCF Electric Drive's latest development is the Gen2 motor, built as a prototype in fiscal 2024. It has a maximum output of over 350 kW, a maximum torque of 500 Nm, a maximum rotation speed of 16,000 rpm, and a power density of 8 kW/kg. The motor type used is an interior permanent magnet synchronous motor, and the magnetic circuit s...

Market & Tech Reports  Updated at: 2025/05/20

AR i4-T This model adopts the Tank platform's vertical parallel super hybrid architecture "Hi4-T." It features a powerful powertrain, energy management, and non-detachable mechanical four-wheel drive structure. The powertrain includes a Miller cycle hybrid vehicle (HV)-dedicated 2.0L engine and a 9-speed HAT transmission. It is a P2 type hybrid with integrated front motor. Maximum output is 300kW, and maximum torque is 750Nm. It can also be used ...

Market & Tech Reports  Updated at: 2025/05/20

ickmann emphasized how important it is for drivers to gradually get used to autonomous driving. Furthermore, the technology needs to be mature in order to gain trust, as trust comes from positive experiences and observations backed up by solid evidence. As an example, he said that people trust high-speed trains and airplanes because of their proven reliability. Evoking positive emotions is the most effective way to build trust, he said.   Mr. Bi...

Market & Tech Reports  Updated at: 2025/05/16

60mm x height 1,505mm, with a wheelbase of 2,970mm. Both BEV (battery electric vehicle) and PHV powertrains will be available.   The EV version is developed based on the Super e platform, with a maximum system output of 500/810kW and acceleration from 0 to 100km in 2.7/5.5 seconds. Maximum vehicle speed is 240/270 km/h. EV driving range (CLTC mode) is 601/701km. The PHV version adopts 5th generation DM technology. It is equipped with an engine w...

Market & Tech Reports  Updated at: 2025/05/14

e systems such as ultrasonic parking sensors, driver monitoring systems, tire pressure monitoring, and traffic sign recognition.   This tool complies with all automotive and functional safety requirements, including ISO 26262 and MISRA. It meets functional safety standards while also offering high speed and excellent memory efficiency, enabling developers to seamlessly integrate AI functionality into their products.   The company plans to...

Market & Tech Reports  Updated at: 2025/05/13

818,000, and if battery rental is used under the BaaS (Battery as a Service) system, it will be CNY 660,000 to 690,000. The vehicle dimensions are: Overall length 5,325mm x width 2,017mm x height 1,621mm, with a wheelbase of 3,250mm. Acceleration from 0-100km/h is reached in 4.3 seconds and maximum speed is 220 km/h. It uses a 900V high-voltage architecture, with the system's maximum output being 520kW and maximum torque 700Nm. The company will p...

Market & Tech Reports  Updated at: 2025/05/09

Future Ready" concept. Featuring a futuristic design with LED headlights and taillights, it includes advanced features such as the Honda RoadSync duo system (in the Connectivity variant) and a reverse assist function. Riders can choose from 3 modes-Sport, ECON, and Normal. The CUV e: reaches a top speed of 83 km/h and offers a range of over 70 km per battery swap. It will be available exclusively for rental in 2 variants: Standard and Connectivi...

Market & Tech Reports  Updated at: 2025/05/08

rating reliable heuristics for situations that they consistently encounter. In turn, high-variability situations decrease reliability, as AI has difficulties in managing edge cases due to their rarity and complexity. When asked about upcoming rapid growth areas for AI, Patricio Vela highlighted low-speed, low-latency robots, giving the example of campus food delivery robots. He also discussed the potential of generative AI with human involvement ...

Market & Tech Reports  Updated at: 2025/04/30

atform, called Super e 3.0, which is the world’s first mass-produced "full-range 1,000-volt high-voltage architecture" for PVs. Its flash-charging battery has a charging power of 1 megawatt at a voltage of 1,000V and a current of 1,000A, achieving the world’s highest mass-produced peak charging speed of 2 km per second. This disruptive technology has given BYD a strong impetus to continue expanding its market share, so we have continued to in...

Market & Tech Reports  Updated at: 2025/04/30