al injection molding)   Magnesium alloy material properties ASTM designation Application examples Specific gravity Tensile strengthMPa Proof strengthMPa Elongation% Thermal conductivityW/m・K Remarks Mg alloy AZ91D Die castingThixomold 1.81 230 155 3 51 Mg-Al-Zn alloy ComparisonAl alloy ADC12 Die casting 2.7 310 150 3.5 96 Al-Si-Cu alloy   Magnesium display housing, thixomolding (Fujioka Engineering)   Fujioka Engineering Co., Lt...

Market & Tech Reports  Updated at: 2025/02/04

e is filled with molten metal. This process enables post-forming heat treatment and welding. Exhibited product: EV battery case Exhibited product: HV battery case Thin wall: 3.0mmMass: 11.1kgMaterial: DX-30Process: High vacuum die casting Thin wall: 1.2mmMass: 3.1kgMaterial: Aluminum alloy ADC12Process: Die casting Exhibited product: Inverter case Exhibited product: Rear suspension tower brace(Toyota Lexus LC500 Convertible) ...

Market & Tech Reports  Updated at: 2023/06/05

lated exhibits included battery cases, motor cases, inverter cases, and e-axle cases.   HV/PHV In production: HV battery case In production: Case for PHV in-vehicle charger Model: Toyota Noah (HV)Mass: 4.5kgRequirement: Weight reduction, thin-wall thickness: 2.3mmMaterial: Aluminum alloy ADC12Process: 2,500t die casting machine, 2 pieces Model: Mitsubishi Outlander PHEVMass: 5.3kgRequirement: airtightness and watertightnessMaterial: Al...

Market & Tech Reports  Updated at: 2022/12/14

been declining, so the company is trying to regain its strength with aluminum components for EVs.   Hitachi Metals exhibited a motor housing with cooling channels for use in EVs. The material is Hitachi Metals' original high-strength casting aluminum, which has 1.7 times higher yield strength than ADC12, a general die-casting material. Light weight and compactness are possible. The integrated type is manufactured by low-pressure die casting and ...

Market & Tech Reports  Updated at: 2022/07/29

: ES8 electric SUV from Chinese EV manufacturer NIO Display panel: ES8 electric SUV from Chinese EV manufacturer NIO Exhibit: Various products including self-clinching fasteners ・ Clinching bolts and nuts: Press-fit into aluminum base material・ Casting nut: Can be press-fitted into ADC12 material with low elongation・ Rivet nut and bolt: One-sided fastening・ Aluminum bushing nut: Threads secured in the hollow part of the base ...

Market & Tech Reports  Updated at: 2022/06/06

heat-resistant, high-current FPC Smaller and faster Power module   Alphatec: Inverter case Inverter case   Alphatec is proposing precision plaster mold casting inverter cases as a low-volume method for prototyping.   By using 3D solid modeling, wood mold design, and aluminum casting (ADC12-F) using plaster molds with good transferability, it is possible to evaluate prototypes with production-equivalent high-precision castings. >>> ...

Market & Tech Reports  Updated at: 2021/09/24

n be made on the metal surface (from several tens of μm to several hundred μm）2) Small size roughness: Small rough patterns (~ a few microns) can be made on the large rough patterns on the metal surface3) Because it is applied by laser treatment it can be used for a variety of metals: aluminum, ADC12 (aluminum diecast), SUS (stainless steel), Mg (magnesium), and SPCC (Steel Plate Cold-rolled Commercial)4) High degree of design freedom on surf...

Market & Tech Reports  Updated at: 2018/12/26

ansion (10＾(-5) /Celsius) Young's modulus (GPa) Flame-retardant heat-resistant magnesium alloy KEHMA 1.78 70.6 (at 23 degrees Celsius) 87.2 (at 177 degrees Celsius) 1,014 (at 23 degrees Celsius) 1,070 (at 177 degrees Celsius) 2.53 45.9 Magnesium alloy AZ91 1.81 51 1020 2.6 45 Aluminum alloy ADC12 2.7 92 (at 20 degrees Celsius) 963 (at 20 degrees Celsius) 2.1 71 Source: Brochures distributed by Kurimoto     Sumitomo Bakelite: Long-fi...

Market & Tech Reports  Updated at: 2015/03/05