the TL300 Twin EDU adopts a symmetrical layout design that prioritizes parts commonization from the early stages of development. Although further downsizing could be achieved by offsetting the shaft layout, this development instead prioritized the commonization of left and right motors, MCU boards, bearings, reduction gears, and manufacturing jigs, thereby optimizing mass-production cost and manufacturing efficiency. While the housing geometry di...

Market & Tech Reports  Updated at: 2026/03/06

l W, 13mm welding 65×53 t3.0 3 S-7-2 Coil-W Round copper wire φ3 L=130 3 S-7-3 Insulating Tube W L=90 2 S-8 SUB ASSY 3 S-8-1 Terminal-N Intermediate, nominal N, 13mm weld 40×35 t3.0 3 S-8-2 Coil-N Round copper wire φ3 L=120 3 S-8-3 Insulating Tube N L=80 1 B . Rotor 2 R-1 Bearing A Motor shaft holder (FAG F-638010.05.6208 CHINA 8130 X336-145317) φ80.00 - 39.9×17.96 2 R-2 Resolver rotor 12 laminated electromagnetic s...

Market & Tech Reports  Updated at: 2026/03/04

Technology Electrical appliances and car accessories Joinhands International (Thailand) Cooling system components for vehicles Minkang Electrical (Thailand) High voltage wire sets for electric vehicles and low voltage wire sets for vehicles Pearl Machine (Thailand) Vehicle parts, vehicle ball bearings, automotive wheel hub parts and automotive wheel hubs Renown Flex Industries Vehicle parts and formed metal parts Seksun Technology (Thai...

Market & Tech Reports  Updated at: 2026/02/17

a 30–80% recharge in around 25 minutes, and has a top speed of 200 km/h, powered by a 116.79 kWh lithium-ion (NMC) battery.   Additional models showcased at Changan’s booth included the DEEPAL Hunter K50 REEV Max AWD, the DEEPAL E07, the Lumin, and the AVATR 11. The brand also displayed an SUV bearing a “New Model” plate; while its official name for the Thai market has yet to be announced, it is known as the DEEPAL Q05 in other markets. ...

Market & Tech Reports  Updated at: 2026/01/16

as those made by BYD (800V), Huawei (620V), Geely (610V), and Xiaomi Auto (726V), etc., adopt oil cooling. New oil cooling technology to support higher voltages: Direct cooling within the slots, hollow conductor cooling Corrosion aggravated by axial current High-temperature discharge damages the bearing surface and deteriorates the lubricant, resulting in increased noise and vibration and affecting operation. Suppression measures: Conduction e...

Market & Tech Reports  Updated at: 2025/12/23

Exhibition Hall (East Hall 7). Mikuni booth Nichicon booth Nissan Sakura Ao-Solar Extender NSK: Electrical bypass plate, conductive brush, transaxle unit mockup   NSK Ltd. (NSK) introduced the use of electrical bypass plates and conductive brushes to prevent electrolytic corrosion in bearings.   The electrical bypass plate was developed by NSK-Warner K.K. It suppresses electrolytic corrosion by creating a bypass path for current u...

Market & Tech Reports  Updated at: 2025/12/17

n China, and 7 in Asia). The company also focuses on peripheral components such as cylinder liners and seal rings.   Based on its engine parts development technology, the company develops drive, battery, and thermal management parts for new energy vehicles. Display panel: NEV products ・ Bearing bushings with outer peripheral projections ・ Aluminum die-cast products・ Seal rings・ Hollow motor shafts (under development) ・ Explos...

Market & Tech Reports  Updated at: 2025/11/11

poration (Pioneer) Click here to see recent developments. While the market for automotive industry aftermarket navigation products is declining, Pioneer Corporation (Pioneer) has high brand name recognition. However, at the end of March 2019 the company was delisted and became a holding company of Bearing Private Equity Asia. In the past, Pioneer was one of Japan’s leading home audio manufacturers, but currently consigns the manufacturing and ...

Market & Tech Reports  Updated at: 2025/11/11

to flow, and there are oil holes where it comes into contact with the end plate. Oil is supplied to the flux barrier near the magnet in the rotor core through the groove in the end plate, flows to the other side, and is then dispersed towards the coil end by centrifugal force.   Ceramic ball-type bearings are used to prevent electrolytic corrosion, and a grounding ring is also installed.   The bearing has a cantilevered rotor structure with on...

Market & Tech Reports  Updated at: 2025/10/14

ufacturing site in the country. The annual production capacity is 900,000 units. In July 2021, JTEKT Automotive Mexico, S.A. de C.V., its local subsidiary in Mexico, reported that it would invest USD 47 million to expand its San Luis Potosi plant. The company manufactures electric steering systems, bearings and steering shafts in Mexico. The plant expansion is expected to open up exports to North America and Japan and create 120 direct jobs. With...

Market & Tech Reports  Updated at: 2025/09/18

7,536 7,911 (1,598 of which is Forged Technologies) *4,825 Power steering (EPS, HPS), dampers, axle assemblies, camshafts, chassis units (unit sub-assemblies incorporating steering, axles, brakes, etc.); Forged Technologies: Crankshafts, con-rods, front axles Decarbon Technologies (combined with Bearing business) 3,850 3,438 (1,149 of which is Forged Technologies) *1,178 Decarbon Technologies (newly established), Bearings (combined) Marine S...

Market & Tech Reports  Updated at: 2025/08/21

shaft by press fitting.   The reducer is a parallel three-shaft, two-stage structure with a counter gear ratio of 2.885 and a final gear ratio of 4.047, for a total gear ratio of 11.675.   An oil seal and a conductive ring, which is thought to be a measure to prevent electrolytic corrosion of the bearing, are installed near the bearing on the gearbox side cover.   The motor housing is not cast aluminum, but extruded aluminum with a water jacke...

Market & Tech Reports  Updated at: 2025/08/19

ed heat sinks, the volume and weight can be reduced by 92% and 75%, respectively, and cooling performance can be increased by 25%.   Exhibitor profile Company Summary Exhibit Taiho Kogyo Co., Ltd.(Toyota City, Aichi Prefecture) Taiho Kogyo was established in 1944. It manufactures and sells bearing products, aluminum die-casting products, system products, and precision dies. High thermal conductivity sheets, etc. Sekisui Polymatech Co.,...

Market & Tech Reports  Updated at: 2025/08/14

ended Mar. 2025 Company-wide sales OPmobility SE FY ended Dec. 2024 Company-wide sales MAHLE GmbH FY ended Dec. 2024 Excluding aftermarket and profit centers Autoliv Inc. FY ended Dec. 2024 Company-wide sales Schaeffler AG FY ended Dec. 2024 Automotive Technologies as a whole and automotive bearing sales in the Bearings & Industrial Solutions division. Beijing Hainachuan Automotive Parts Co., Ltd. FY ended Dec. 2024 Company-wide sales ...

Market & Tech Reports  Updated at: 2025/07/02

JSAE 2025 in Yokohama: Inverters, Thermal Management Power electronics, e-Axle components, Bearing Summary Inverters, electric components (Denso, BorgWarner, Valeo, Schaeffler, TE, ASTI) Thermal management components (Aisin, Mahle, Schaeffler) Power electronics components (Toshiba Group, Denso, BorgWarner, Schaeffler, Asahi Kasei) e-Axle and motor parts (TDK, MinebeaMitsumi, Sumitomo Electric Industries, TRIS, SWCC) Bearings, electrolytic corrosi...

Market & Tech Reports  Updated at: 2025/06/26

experiencing a trend of declining sales and profits as a backdrop, the company applied to a third-party organization for a Turnaround ADR (Alternative Dispute Resolution) system, a type of private liquidation. This is because it became difficult to repay as planned the JPY 108.3 billion of interest-bearing debt that existed at the end of September 2018. In September 2019, the company announced a proposed business restructuring plan that included ...

Market & Tech Reports  Updated at: 2025/05/29

n dynamically monitors over 20 key variables, allowing for automatic shut-off to ensure safety. High speed balanced shaft safety architecture Four planetary differential mechanisms are used. Compared to two planetary differentials, torque is increased by 22%, differential capacity by 45% and load-bearing capacity is increased by 72%. At the same time, a speed ratio of 10.9 is achieved, resulting in an output of 5,500Nm of drive wheel torque. It...

Market & Tech Reports  Updated at: 2025/04/23

, but the limiter was set to 27km/h to comply with legal regulations.   FC Components on Display ①Motor, ③Converter (270kW), ④Inverter, ⑤FC Stack, ⑥Stack Shutoff Valve ⑭Electric Air Compressor ㉓Hydrogen Tank Valve, ㉔Hydrogen Tank Plug Bosch: FC components, hydrodynamic gas bearings, motor cores Bosch presented a system diagram of components (numbered 1 to 24) for FCEVs, including stacks, electric air compressors, hydrog...

Market & Tech Reports  Updated at: 2025/03/21

reas.   Pioneer Corporation (Pioneer) ▶ Recent trends While the market for automotive industry aftermarket navigation products is declining, Pioneer Corporation (Pioneer) has high brand name recognition. However, at the end of March 2019 the company was delisted and became a holding company of Bearing Private Equity Asia. In the past, Pioneer was one of Japan’s leading home audio manufacturers, but currently consigns the manufacturing and ...

Market & Tech Reports  Updated at: 2024/10/03

lf-bridge, three power modules are assembled and used for one motor.   As for SiC, the company is developing a single-sided cooled power module.   Other exhibits at the Toshiba Group booth included silicon nitride ceramic insulating and heat-dissipating substrates and silicon nitride ceramic ball bearings by Toshiba Materials Co., Ltd.   Toshiba Materials' silicon nitride ceramic substrates are used as insulating plates in the power card part ...

Market & Tech Reports  Updated at: 2024/08/27