mproves system efficiency. In January 2025, Valeo Group announced that it was supplying several components to Renault's electric vehicle 5 E-Tech, which won the Car of the Year 2025 award at the Brussels Motor Show. The 5 E-Tech is equipped with a high-voltage coolant heater, radiator, and electric oil pump for lubrication and cooling of the company's e-Axle. These parts are also produced in France and other countries in Europe. In October 2024, ...

Market & Tech Reports  Updated at: 2026/03/30

which the internal combustion engine has been replaced with a motor, replacing the roughly 500cc engine of a small tractor with a 125cc equivalent motor for an electric motorcycle. The battery is a 48V LFP, and the hydraulic pressure of the auxiliary equipment is also electrified with an electric oil pump (EOP) to operate the actuators at the rear of the vehicle, and the lubrication system is also utilized. The display console is still the sam...

Market & Tech Reports  Updated at: 2026/03/10

ircuits, it enables the precise distribution of heat and cold, improving battery efficiency and ensuring that all components operate within their optimal temperature ranges. Oil-cooled flexible thermal unit Flexible thermal unit display screen Mikuni: Thermal management modules, electric oil pumps, motors for small mobility vehicles   The thermal management module "MsMV" (Mikuni Smart Multi Valve) exhibited by Mikuni Corporation (Miku...

Market & Tech Reports  Updated at: 2025/12/17

eloped a new continuously variable transmission "CVT-X" for mid-size and large FWD vehicles with improved environmental performance and drivability. It is said to have achieved a transmission efficiency of more than 90%, which was considered difficult for a CVT. As a structural feature, an electric oil pump has been added where previously there was only one mechanical pump. This makes the mechanical pump more compact and reduces friction loss by ...

Market & Tech Reports  Updated at: 2025/12/08

mal management: In January 2025, the Valeo Group announced that it was supplying multiple components to Renault's electric vehicle, the 5 E-Tech, which won the Car of the Year 2025 award at the Brussels Motor Show. The 5 E-Tech is equipped with a high-voltage coolant heater, radiator, and electric oil pump for lubrication and cooling of the company's e-Axle. These parts are also produced in France and other countries in Europe. In October 2024, ...

Market & Tech Reports  Updated at: 2025/07/08

and heating the battery when it is cold or cooling it when it heats up, it is possible to extend the vehicle's range. Thermal mnagement moduleThermal management module display panel Oil management module Oil management module display panel   The oil management module combines an electric oil pump, filter, and thermal management system into a single unit to efficiently cool and lubricate the electric motor and transaxle. The thermal man...

Market & Tech Reports  Updated at: 2025/06/26

e provides a peak torque of 1,341 lb-ft and peak power of 652 kW, while generating 412 kW of continuous power at 750 VDC, making it suitable for Class 6 to Class 8 commercial vehicles. The module's compact size with an axial length of 465 mm. and height of 531 mm., combined with the integration of oil pump, water pump, and oil coolers improves its ease of installation and reduces system complexity. BorgWarner provides other inverter-motor drive ...

Market & Tech Reports  Updated at: 2025/06/06

well as fuel economy.   Its lightweight, yet rigid aluminium structure with a long skirt crankcase design features a ladder frame for improved engine stiffness. It has a water-cooled variable geometry turbocharger for superior torque delivery. It has technologies such as dual cam phasing, variable oil pump, integrated exhaust manifold in cylinder head, etc. Its advanced exhaust aftertreatment system ensures lower emissions. The engine is capable...

Market & Tech Reports  Updated at: 2025/02/13

eloped a new continuously variable transmission "CVT-X" for mid-size and large FWD vehicles with improved environmental performance and drivability. It is said to have achieved a transmission efficiency of more than 90%, which was considered difficult for a CVT. As a structural feature, an electric oil pump has been added where previously there was only one mechanical pump. This makes the mechanical pump more compact and reduces friction loss by ...

Market & Tech Reports  Updated at: 2024/11/21

of over 50,000 units.   Rotors are available for interior permanent magnet synchronous motors (IPMSM) and wound-rotor synchronous motors (WRSM) or electrically excited synchronous motors (EESM).   Korens EM also offers parking brake system actuators (PLA: Parking Lock Actuator) and EOPs (Electric Oil Pumps). Display for EOP, EWP (Electric Water Pump), BSG (Belt Starter Generator), etc. Display panel for Korens EM Co., Ltd.   DIC (DAE...

Market & Tech Reports  Updated at: 2024/10/10

Atkinson External EGR Low pressure EGR Low pressure EGR Low pressure EGR Low pressure EGR Low pressure EGR Low friction Electrification accessories Without pulley Without pulley Without pulley Without pulley Without pulley Low viscosity oil 0W20 0W8 0W20 0W20 0W16/0W20 Variable displacement oil pump Single stage MAP variable MAP variable MAP variable MAP variable Thermal management Water pump Electric Electric Electric Electric Electric...

Market & Tech Reports  Updated at: 2024/08/16

al efficiency of 46.06%.・ The exhaust gas recirculation rate (EGR) of the three-way catalyst pre-intake system is nearly 30%, improving thermal efficiency.・ High tumble-flow air duct, 15% increase in tumble-flow rate, faster combustion.・ Intelligent variable lubrication system and intelligent oil pumping for precise control of lubrication.・ Intelligent combustion system with optimized combustion chamber + high-energy ignition for more eff...

Market & Tech Reports  Updated at: 2024/08/05

lant pump, condenser, chiller, sensors, valves and more in one unit.   The Thermal Management Module, which connects each component, is said to improve energy efficiency while also saving installation space, engineering labor, and costs.   The oil management module is a modular combination of the oil pump, filter, oil tank, and other components required to handle the cooling oil of oil-cooled e-Axles.   It is designed to be compact and lightwe...

Market & Tech Reports  Updated at: 2024/06/28

suring instruments. On display were various die-cast aluminum products (after precision cutting) and various inspection and measuring instruments. Exhibit: Aluminum die castings after precision cutting Exhibit: Various measuring instruments Bottom left: end plate of motor for HV, Top left: oil pump cover, motor case for EPS. On the right is the positioning inspection tool. On the left is the runout measuring instrument, in the center are...

Market & Tech Reports  Updated at: 2024/06/07

drive output of 158kW, it meets the portfolio and performance demands of sporty sedans to mid-sized SUVs. It uses a combination of 10-layer flat wire oil-cooled motor, customized high-efficiency IGBTs, ultra-low friction technology, and precision cooling and temperature control system (electronic oil pump, precision spraying system, and smart temperature control technology) to achieve a maximum overall efficiency of 95%. High mechanical desig...

Market & Tech Reports  Updated at: 2024/01/17

nt pumps, condensers, chillers, sensors, and valves in a single unit, is a module in which the various thermal management components work together to improve energy efficiency and enable savings in installation space, engineering man-hours, and costs.   The oil-cooling module for xEVs combines the oil pump, filter, oil tank, and other components necessary to handle oil cooling outside the oil-cooled e-Axle as a module to reduce size and weight, ...

Market & Tech Reports  Updated at: 2023/12/12

ction capacity in Europe and the United States by building new plants. Nidec’s two new plants in Serbia will be used with a view to mass-producing e-Axles for Europe going forward. A new e-Axle plant is scheduled to be constructed in Mexico in FY2023 or later.   KYB: Focus on developing electric oil pump for lubrication and cooling for e-Axle   KYB Corporation (KYB) is developing electric oil pumps for lubrication and cooling for e-Axles, wit...

Market & Tech Reports  Updated at: 2023/12/11

eloped a new continuously variable transmission "CVT-X" for mid-size and large FWD vehicles with improved environmental performance and drivability. It is said to have achieved a transmission efficiency of more than 90%, which was considered difficult for a CVT. As a structural feature, an electric oil pump has been added where previously there was only one mechanical pump. This makes the mechanical pump more compact and reduces friction loss by ...

Market & Tech Reports  Updated at: 2023/11/16

d silicon IGBT semiconductor as well as silicon carbide MOSFET semiconductor technology for lower power consumption.   Transmissions and gear sets   Six gearboxes with ratios from i = 8.5 to i = 11.0 were developed to cover all performance levels.   By using dry sump lubrication with an electric oil pump and direct oil cooling of the e-motor, it was possible to achieve high transmission efficiency and high-power density.   By passing the oil ...

Market & Tech Reports  Updated at: 2023/07/11

jacket for PCU, oil cooler   MAHLE GmbH exhibited cooling-related electrified vehicle components, including oil cooling modules for xEVs and plastic water jackets for PCUs and oil coolers.   The oil-cooled module for xEVs (left side of the photo) aims to reduce size and weight by integrating the oil pump, filter, oil tank, and other components necessary to handle the cooling oil outside the oil-cooled e-Axle as a module.   The resin water jac...

Market & Tech Reports  Updated at: 2023/07/10