ties History and business development status The company was formed as Nagoya Rubber Co., Ltd. by the spin-off of the rubber research division of Toyota Motor Industry Co., Ltd. It was renamed Toyoda Gosei Co., Ltd. (Toyoda Gosei) in 1973. Afterwards, the company focused its efforts on automotive interior components, including safety systems, and today the company conducts business in two major segments: automotive components and optoelectronic...

Market & Tech Reports  Updated at: 2025/10/27

ove the vent grille) and the display is angled more steeply, greatly improving usability.   This new generation HMI was installed in the GLC and CLA Shooting Brake BEVs this time, but is expected to spread to other vehicles in the future. Mercedes-Benz CLA Shooting Brake CLA Shooting Brake interior   All displays are integrated and the upper half of the instrument panel consists of one huge flat surface. In the CLA, the center and f...

Market & Tech Reports  Updated at: 2025/10/24

ghting System), ADB (Adaptive Driving Beam), and AFS (High Beam Control) variable light distribution systems; rear lamps and rear combination lamps; high-mounted stop lamps; and electronic control units (ECUs, electrical ballasts, etc.). Reflectors, turn signals, fog lamps, license plate lamps, and interior lamps are not reported here. Note: AHB (Automatic High Beam): System for high-beam driving. Automatically switches between high and low beam...

Market & Tech Reports  Updated at: 2025/10/20

d's first Emotive Intelligent (EI) concept car, at IAA Mobility 2025. Also on display were production models, including the Avatr 06 and Avatr 12. Vision Xpectra concept car   The model's design was inspired by the "Power of Natural Energy" and features clean, taut lines on the exterior, while the interior combines high-quality materials with cutting-edge technology. It delivers an intelligent, personal and immersive cockpit experience. This mod...

Market & Tech Reports  Updated at: 2025/10/20

ting, fleet coordination, and user interfaces, integrating all components into a seamless and scalable mobility service.   The MOIA ID. Buzz AD is an autonomous ride pooling vehicle based on the extended version of the VW ID. Buzz, featuring a longer wheelbase and a raised roofline to provide more interior space and easier access. The vehicle is designed specifically for urban mobility services and can comfortably accommodate four passengers alo...

Market & Tech Reports  Updated at: 2025/10/07

the evaporator is made of aluminum with fins affixed to remove heat efficiently. For heating, heated engine coolant is circulated through a heater core, which is a separate heat exchanger from the evaporator, via a separate circuit, and the warm air generated at this time is blown into the vehicle interior by a blower fan. The increase in electrified vehicles (xEVs) is bringing about two changes to air conditioning systems. The first is the inc...

Market & Tech Reports  Updated at: 2025/10/07

inent diffuser.   The body color shifts from metallic grey to volcanic beige, inspired by the natural landscapes of Fuerteventura. CUPRA also uses sustainable materials like ampliTex™ flax fiber composites in the exterior panels, which reduce CO₂ emissions compared to traditional carbon fiber. Interior design   The interior of the CUPRA Tindaya is designed around the driver, with a strong focus on both performance and digital innovation. At...

Market & Tech Reports  Updated at: 2025/10/02

ji Seat Delta Kogyo SNIC TS Tech Toyo Seat Houwa Kogyo Adient (formerly Johnson Controls Japan) Marutaka Marubishi Industry Kinryo Kogyo Click here for Analysis Report: Seat (U.S. and European Markets)   Safety and comfort are required of seats, important automotive components which influence the interior design of vehicles. The construction of the seat can be divided into three major parts: the basic skeleton/frame, the cushioning material, an...

Market & Tech Reports  Updated at: 2025/09/27

pavilion (IAA MOBILITY 2025 organized by Verband der Automobilindustrie e. V., Photo: Copyright © MarkLines Co., Ltd. All rights reserved)   The body colour, ‘Titanium', evokes the “warm, technical elegance” of titanium metal itself.   Unfortunately, it was not possible to inspect the interior of the vehicle at the trade fair, but the official press photos show that it is heavily influenced by the minimal yet luxurious interior desi...

Market & Tech Reports  Updated at: 2025/09/22

type (P-EPS): For large vehicles, the motor is installed in the engine compartment. "DP-EPS" is dual pinion type Column-assist type (C-EPS): The motor is connected to the steering column inside the passenger compartment and drives the column shaft. Advantages: Because the motor is in the vehicle interior there is more room in the engine compartment, which makes it particularly well suited for mini-cars and subcompacts.Excellent water resistanc...

Market & Tech Reports  Updated at: 2025/09/18

ADB, and AHB (Adaptive Front-Lighting System, Adaptive Driving Beam, and High Beam Control, respectively); rear lamps and rear combination lamps; high-mounted stop lamps; and electronic control devices (ECUs, electrical ballasts, etc.). Reflectors, turn signals, fog lamps, license plate lamps, and interior lamps are not reported here. Note: AFS (Adaptive Front-Lighting System): System for driving around curves. Horizontally adjustable beam head...

Market & Tech Reports  Updated at: 2025/09/09

in development e-Axle configuration 7-in-1 7-in-1 3-in-1 Maximum output 150kW (360V) 100kW 170kW Rated output 45kW 50kW 75kW Maximum torque (motor) 192Nm 126Nm 110Nm Maximum rotation speed (motor) 18,550rpm 18,550rpm 32,000rpm Stator outer diameter 180mm 180mm 170mm Motor type IPMSM (Interior permanent magnet synchronous motor) IPMSM (without heavy rare earths (HRE)) IM (Induction motor; three-phase double winding) Cooling method...

Market & Tech Reports  Updated at: 2025/08/29

lectric power steering systems are divided into three categories depending on the position of the electric motor. Column-assist type (C-EPS): The motor is connected to the steering column inside the passenger compartment and powers the column shaft. Advantages: Because the motor is in the vehicle interior there is more room in the engine compartment, which makes it particularly well suited for minicars and subcompacts. Excellent water resistanc...

Market & Tech Reports  Updated at: 2025/08/21

Tesla Cybertruck displayRear of the disassembled vehicle Specifications display panelGigacast body display panelDisplay panel for 48V and Ethernet features Motor and drive unit Motor display   The disassembled vehicle is the AWD model with four-wheel drive. The rear drive unit is an interior permanent magnet synchronous motor (IPMSM) with a maximum output of 221kW, and the front drive unit is an induction motor (IM) with a maximum...

Market & Tech Reports  Updated at: 2025/08/19

limiter Display panel: Paper friction material for BEV torque limiter World's smallest and lightest ・ Enables low-strength design of BEV drivetrain components.・ Space-saving enabling installation in BEVs   The type of drive motor used in EVs is often the magnet synchronous motor IPM (Interior Permanent Magnet) type. The rotor has permanent magnets embedded in it and is mechanically safe and suited for high-speed rotation. Powerful ...

Market & Tech Reports  Updated at: 2025/08/15

May 2023. The trucks are used in the actual transportation operations of each company to collect information from operational and vehicle development perspectives.   High pressure hydrogen tanks: Toyoda Gosei Toyoda Gosei is a company that manufactures safety system products such as airbags, interior and exterior parts, fuel tank peripheral parts, functional parts such as high-pressure hydrogen tanks, and weatherstrip products. The company...

Market & Tech Reports  Updated at: 2025/08/14

pecialized in innovative LED lighting technology and has expertise in designing, developing, prototyping and scaling thin and flexible LED lighting and HMI products for the automotive industry.   The company has been promoting large-area dynamic lighting since 2018 with the goal to enhance vehicle interiors by using lighting to improve mood, safety and interactivity. Although there is growing interest in this technology, it has not yet been wide...

Market & Tech Reports  Updated at: 2025/08/08

ropean and U.S. production) Ⅴ. Sales figures of major seat suppliers Supplier global footprint (Detail) Adient Lear FORVIA Magna Seating Brose Click here for Analysis Report: Seat (Japanese Market)   Safety and comfort are required of seats, important automotive components which influence the interior design of vehicles. The construction of the seat can be divided into three major parts: the basic skeleton/frame, the cushioning material, an...

Market & Tech Reports  Updated at: 2025/08/06

the cloud-native development phase can be collected from around the world, stocked, and then tested on the HIL sequentially, reducing capital investment while increasing development efficiency.   HIL*: Hardware In the Loop 3. Exterior view of HIL-as-a-Service (Source: Photo by MarkLines) 4. Interior view of HIL-as-a-Service (Source: Photo by MarkLines)   Valeo called this development environment, which allows users to check HW (ECU ha...

Market & Tech Reports  Updated at: 2025/08/01

user emotions and states through a multimodal perception system of voice, vision, and motion. The system automatically performs corresponding operations according to different users, times, and emotional states. For example, suppose the system detects that the battery charge is low and the vehicle interior needs cleaning. In that case, it will automatically recharge the battery, clean in interior, and return the vehicle. Additionally, if the sys...

Market & Tech Reports  Updated at: 2025/07/22