on) The seat is flipped up and the engine section is seen from the right side of the vehicle. In the photo, the hose that comes out from the bottom right to the center is hydrogen piping that becomes a pipe partway through and is fastened to the joint block (center of the photo) that rises from the throttle body. The pipe extends further to the left of the vehicle, and the piping route beyond it can be seen in the lower left photo. Vi...

Market & Tech Reports  Updated at: 2026/03/11

cles Unestablished Alloy wheels for vehicles Unestablished Battery management system (BMS) Unestablished Drive shaft Yuxin Pingrui Electronic (Thailand) Ignition coil, charging coil, and dc voltage regulator China/Hong Kong Howyaa Electronic Control System (Thailand) Automotive electronic throttle body China/USA Xintian Autoparts (Thailand) Plastic parts for engine and fuel systems for vehicles Hong Kong Tuopu Technology (Thailand) ...

Market & Tech Reports  Updated at: 2026/02/17

rms part of the EGR passage (refer to exhaust system section for EGR details).   Intake manifold   The intake manifold is divided into a plastic part to which the electronic throttle is attached and an adapter part inserted between the plastic part and the cylinder head. Plastic part. The throttle body draws air downward. Viewed from above as installed in the vehicle. Thickness is reduced to increase internal volume. The mating surface ...

Market & Tech Reports  Updated at: 2020/11/09

ased significantly, and the number of coolant control valves has also increased correspondingly. GF reinforced PPS (polyphenylene sulfide) is used to take advantage of the material’s properties such as hot water resistance, mechanical strength, and dimensional stability.  Mikuni also displayed a throttle body and electric vacuum pump for electrified vehicle applications.   Water pipe joint (Nippon Thermostat Co., Ltd.) Water pipe jointL...

Market & Tech Reports  Updated at: 2019/11/28

ule (Toray) Intake module (Keihin) The part is a new type of cooling system component different from radiators and intercoolers, making use of the thermal resistance, mechanical strength and chemical resistance characteristics of PPS. The part shown is a modularized intake manifold, injector, and throttle body using PPA (PA6T). It has excellent thermal resistance, chemical resistance and mechanical characteristics. Thermal magagement mod...

Market & Tech Reports  Updated at: 2018/11/14

effler has designed for German applications were also exhibited at the company's booth. PPS: Poly phenylene sulfide PA: Polyamide Thermal management module Using PA materials for engine peripheral parts Keihin: Intake module   The product modularizes the intake manifold, injector, and throttle body and is made of PPA (PA6T). PPA was used for its excellent heat resistance, chemical resistance, and mechanical properties. PPA: Polypht...

Market & Tech Reports  Updated at: 2017/12/06

he vehicle and the exhaust line in the rear. Intake air enters the air duct at the front end of the engine room, passes through the air cleaner on top of the engine, and flows in the air duct to the turbocharger between the back of the engine and the dashboard panel. Turbocharged air is sent to the throttle body through the intake pipe at the top of the engine. The throttle body is located at the entrance to the intake manifold that the water-coo...

Market & Tech Reports  Updated at: 2016/10/31

a (Prius c) teardown: Part 1   Toyota Aqua (Prius c) teardown: Part 2 Nissan Leaf   Nissan Leaf teardown (Part 1) (Feb. 2012)   Nissan Leaf teardown (Part 2): main components disassembled (Sep. 2012)   Nissan Leaf teardown (Part 3): body cutaway (Nov. 2012) Item Name Supplier Engine Throttle body Denso Corp. Ignition coil Denso Corp. Piston Art Metal Mfg. Co., Ltd. Rocker arm Otics Corp. Hydraulic lash adjuster Otics Corp....

Market & Tech Reports  Updated at: 2016/10/03

er（2WD model）   Engine in place shown without front bumper, grille, radiator and condenser Left side of the lowered engine   Top view of the engine in place Rear view of the lowered engine and transmission Surge tank (resin) and intake manifold Surge tank and throttle body without the intake manifold  The throttle body, surge tank (resin) and intake manifold are located on the top center of the V-bank. ...

Market & Tech Reports  Updated at: 2016/05/30

issan Leaf teardown (Mar. 2012)  (Part 2) main components disassembled (Sep. 2012)  (Part 3) body cutaway (Nov. 2012) List of main suppliers Item Name Supplier Engine Airflow sensor Hitachi Automotive Systems, Ltd. Air cleaner Denso Corp. Electric water pump Aisin Seiki Co., Ltd. Throttle body air duct Toyoda Gosei Co., Ltd. Lambda control sensor Denso Corp. EGR cooler Maruyasu EGR cooler control valve Aisan Industry Co.,...

Market & Tech Reports  Updated at: 2016/05/12

e provides good responsiveness, powerful torques in low- to mid-ranges, and high fuel economy. The aluminum engine block features a carefully design rib reinforcement for extra rigidity to reduce noise and vibrations while achieving substantial weight reduction. This block, plastic intake manifold, throttle body and other components were developed to make the Daihatsu Move the lightest car in class. Nearly a decade has passed since its debut in 2...

Market & Tech Reports  Updated at: 2015/03/02

nition NGK (NGK Spark Plug) - Ignition coil assembly ELDOR Turkey Air-conditioning compressor Sanden Poland Air-conditioning compressor piping Bridgestone - Engine belt Optibelt - Flywheel LUK (Schaeffler) - Engine water pump GPM - Generator Bosch Spain Starter motor Valeo Poland Throttle body Magneti Marelli - Crankshaft bearing Zhejiang FKG Precision Machinery Germany Air-flow meter Bosch Germany Knock control sensor Si...

Market & Tech Reports  Updated at: 2014/12/02

e the engine cooling water pump was installed before removal.   Intake manifold Fuel injector The intake manifold is seen with Denso's swirl control valve in the intake port. The red arrow points to the swirl actuator that controls the swirl control valve. The white arrow points to the throttle body by Hitachi Automotive Systems. The intake port of the throttle body is 55mm in diameter. Denso's direct fuel injection system. It consis...

Market & Tech Reports  Updated at: 2014/09/30

dustry Co., Ltd. Electromagnetic clutch for supercharger Ogura Clutch Co., Ltd. Intercooler for supercharger MAHLE Behr GmbH & Co. KG Housing Ahresty Corporation Outlet duct ROKI Co., Ltd. Air cleaner Air intake duct Excell Corporation Air-flow meter Hitachi Automotive Systems, Ltd. Throttle body Engine management system (EMS) Ignition coil Hitachi Automotive Systems Hanshin, Ltd. Swirl control valve Denso Corporation Fuel...

Market & Tech Reports  Updated at: 2014/09/24

r supplied by Denso. The yellow arrow on the upper-right photo points to casing that contains the motor of the electric Variable Timing Control (VTC) with an electrified cam sprocket on the intake side. The purple arrow on the lower-left photo points to the intake manifold supplied by Metts and the throttle body supplied by Keihin. The orange arrow points the electric power steering (EPS) supplied by Showa, the pink arrow to the final drive gear ...

Market & Tech Reports  Updated at: 2014/02/28

  Component Supplier Engine 2.0-liter (1,993cc) in-line 4-cylinder Atkinson-cycle gasoline engine (max. output: 105kW/143ps, max. torque: 165Nm/16.8kgf-m), type: LFA Honda (in-house) Cylinder head cover MAHLE Spark plug NGK Spark Plug VTEC hydraulic control valve (spool valve) Keihin Throttle body Intake manifold Metts Cylinder block Chain case Yamada Manufacturing Engine Management System (EMS) Keihin Electric water pum...

Market & Tech Reports  Updated at: 2014/02/17

ill concentrate production of ECUs in Thailand for engines used in Honda's new flagship model that is marketed globally starting in 2013 This will promote economy of scale. Honda will also supply the product to Thailand, Japan, Asia, and Mexico. The plant also began increasing production of the DBW throttle body. Keihin will transfer production of parts for the Honda New Fit from Japan to Thailand to reduce costs by more than 20%. Keihin also set...

Market & Tech Reports  Updated at: 2014/01/09

ile reducing the fuel consumption. The company is aiming for injection pressure of up to 300MPa. Bosch Diesel engine management system  Bosch presented its diesel engine control system which comprises 26 items including piezoelectric injectors, high-pressure pump for fuel lubrication, electronic throttle body, start/ stop system and sensors. According to Bosch, the system will improve fuel economy and reduce CO2 emissions by approximately 14% ...

Market & Tech Reports  Updated at: 2013/12/25

t 1.496-liter in-line 4-cylinder Atkinson cycle gasoline engine  (max. output: 81kW/110ps, max. torque: 134Nm/13.7kgf-m),  model name: LEB Honda (in-house) Starter motor Mitsuba Flywheel (clutch damper) Luk (Schaeffler) Cylinder head cover MAHLE Ignition coil Hitachi Automotive Systems Throttle body Keihin Intake manifold VTEC hydraulic control valve Engine management system (EMS) Electric water pump (for cooling the engine) ...

Market & Tech Reports  Updated at: 2013/12/20

his plant will be its first production base in Indonesia. Main products at this plant will be vibration insulating rubber such as engine mounts and these products will be supplied to Honda and Suzuki. The supplier aims for revenue of more than JPY 3 billion in FY 2018.     Aisan Industry adds throttle body production line  In FY 2013, Aisan Industry is investing JPY 1 billion to add a production line to a plant of P.T. AISAN NASMOCO IND...

Market & Tech Reports  Updated at: 2013/11/27