Vibracoustic exhibits innovative NVH solutions at 5th Seres Lightweighting Conference At the 5th Seres Lightweighting Conference, Vibracoustic, a Freudenberg SE subsidiary, exhibited a range of innovative lightweight automotive NVH (noise, vibration, and harshness) reduction solutions. These solutions included several lightweight products for EVs, such as dual plastic spring pads made with double-layered plastic injection molding process, TPE mo...

News  Updated at: 2025/12/23

nstruction, the CD400-4E320 adopts a dual-motor collaborative drive solution to heavy-duty and complex operating conditions. Technologically, the CD400-4E320 is designed to integrate a high-speed oil-cooled hairpin motor, a high-torque transmission, and an MTCU, delivering a more than 150kg lighter weight than single-motor solutions of the same power, a maximum output torque of 27,000Nm, and a peak power of 600kW. An intelligent control system en...

News  Updated at: 2025/12/22

March 2026. The LDP, which initially planned to suspend the tax for two years, has decided to completely abolish it based on a request from the Democratic Party for the People. The period of “eco-car tax reductions” will be extended by two years by introducing more stringent standards. Vehicle weight tax reductions will continue to apply to vehicles such as electric vehicles (EVs), fuel-cell vehicles (FCEVs), and plug-in hybrid vehicles (PHE...

News  Updated at: 2025/12/22

ia, announced that it will officially present the new generation Foton View van on December 24, 2025. The car is certified for the Russian market with a 2-liter turbodiesel engine producing 159 hp, which can be paired with either a 6-speed manual or an 8-speed automatic. The vehicle's gross vehicle weight is 2,490 and 3,100 kg. The van has an overall length of 5,490 mm and is available in two heights: 1,990 and 2,195 mm. A "winter" package is ava...

News  Updated at: 2025/12/17

ng together with our partner OEMs from the development stage to improve our technology and reduce costs. - Yorozu, a major suspension manufacturer, is showcasing its technology called Genni-kun that is used to form steel plates of varying thicknesses. By stretching and thinning the steel plate, the weight can be reduced by about 10% compared to conventional forming methods, and the amount of steel used can be reduced, leading to a lower-cost plat...

News  Updated at: 2025/12/17

d offers more space and driving performance similar to a larger car. It is also the first electric ID model to carry the Polo name. The ID. Polo features a new front-wheel-drive system with the latest APP 290 electric motor. The new PowerCo cell-to-pack battery design removes extra components, cuts weight and cost, and increases energy density by about 10%, improving driving range. The ID. Polo includes advanced ADAS systems, such as an improved ...

News  Updated at: 2025/12/15

n Source Battery has constituted “faster, lighter, longer, and better” technical systems. The systems aim to cover logistics vehicles and heavy-duty trucks with an 18-minute fast charging solution; leverage LMX materials and integrated technologies to improve low-temperature performance, reduce weight, and increase battery capacity; and extend battery service life and lower lifecycle costs by technological means. 12 core technologies will be ...

News  Updated at: 2025/12/15

e times more capacity than the 2Ah P1 prototypes delivered to customers in July 2024. The 10Ah cells feature a proprietary oxide coating that offers improved safety, allowing electric vehicle manufacturers to design lighter and less expensive battery packs. This technology could reduce battery pack weight by 20% and cut manufacturing costs by GBP 2,500 per vehicle. The prototypes were manufactured on Ilika’s automated pilot line and completed i...

News  Updated at: 2025/12/15

de from fibreglass-reinforced polyamide can be easily recycled. Tomorrow XX also prioritises using mono-materials and replacing new raw materials with recycled ones. For some interior parts, the company has created a single-plastic composite made from recycled PET. Its foam core reduces door pocket weight by over 40%. The company is also developing carpets and floor mats made entirely from recycled PET, which could cut their carbon dioxide footpr...

News  Updated at: 2025/12/12

Stellantis Malaysia launches all-new Leapmotor B10 e-SUV Announced on December 10, 2025, Stellantis Malaysia launched the all-new Leapmotor B10, a C-segment electric SUV. Built on the LEAP3.5 architecture with CTC 2.0+ integration, the B10 measures (LWH) 4,515x 1,885x 1,655 mm with a 2,735-mm wheelbase. It offers a lower center of gravity, 50:50 weight distribution, and a rigid 36,360 Nm/deg body. Its lightweight rear-wheel-drive motor delivers 2...

News  Updated at: 2025/12/12

-collision structures such as A- and B-pillars, door anti-collision beams, door rings, and floor beams, deliver an industry mainstream strength of 1,300-1,800MPa. The Chery-HBIS cooperative hot-formed steel plate comes with much higher strength and lower thickness for more possibilities for vehicle weight reduction, while featuring both toughness and formability. Having undergone several tests and validations, the new product is expected to be ap...

News  Updated at: 2025/12/11

gine platform for low-altitude aircraft and NEV range-extending systems.The platform, available in single-rotor (0.5L), dual-rotor (1.0L and 1.5L), and other variants, is applicable in various scenarios.The DAAE dual-rotor engine boasts technical advantages in combustion efficiency, structural lightweighting, precise lubrication, and sealing performance, and has been improved in power-to-weight ratio, operating smoothness, and reliability to meet...

News  Updated at: 2025/12/11

duty bus for intercity passenger transport, at an event in Chennai. The BB1924 bus is powered by a BS‑VI OBD‑II OM926 6‑cylinder diesel engine with turbocharger and intercooler, producing 241 hp and 850 Nm of torque, paired with a 6‑speed synchromesh gearbox. The vehicle has a gross vehicle weight of 19,500 kg and can accommodate up to 51+1+1 seats. The chassis features a high-tensile steel frame (255 x 73.3 x 7 mm), a wheelbase of 6,850 ...

News  Updated at: 2025/12/08

ACEA raises concern over key gaps in council approach to weights and dimensions On December 4, the European Automobile Manufacturers’ Association (ACEA) announced that adoption of the Council’s general approach on the Weights and Dimensions Directive does not do enough to accelerate the decarbonisation of the transport sector.  ACEA stated that zero-emission solutions must become the fully competitive go-to choice for transport operators in ...

News  Updated at: 2025/12/08

EU sets position on maximum weights and dimensions for certain road vehicles On December 4, the European Council announced that transport ministers adopted a Council position that amends the directive laying down maximum authorised dimensions and weights for certain road vehicles. Following approval by the Council, the presidency can start negotiations with the European Parliament to reach a final agreement. The amendment introduces incentives fo...

News  Updated at: 2025/12/05

concept model for an electric sports car. Toyota is positioning these three newly unveiled models as its next flagship sports cars following the Toyota 2000GT and Lexus LFA. All three are being developed together under a shared philosophy centered on three key elements: a low center of gravity, low weight with high rigidity, and the pursuit of aerodynamic performance. The GR GT was conceptualized and developed as a road-legal race car. Centered o...

News  Updated at: 2025/12/05

H-One to propose single-punch stamping for large stamped automotive parts as lighter, lower-cost solution H-One Co., Ltd. (H-One), a company specializing in pressing parts primarily for Honda Motor Co., Ltd. (Honda), has developed a single-punch stamping technology to produce large-sized stamped parts, such as rear floor panels. This technology uses lightweight, highly rigid hot-stamped (hot-pressed) materials and cold-pressed materials. It can m...

News  Updated at: 2025/12/05

vehicle systems at individual stations. At the heart of this new line is a large-scale precision fixture for assembly of Gemini’s BinC (Body in Carbon), with its unique two-piece composite body structure. The video also highlights Gemini’s frames, which Aptera says are robust and optimized for weight and strength. Aptera’s battery partner, CTNS, is now on-site for the first time, assembling modules directly in Aptera’s facility.  Aptera...

News  Updated at: 2025/12/05

a major European OEM for an entire EV platform starting in 2027. The component will be used in several EV models and will be manufactured in sandwich construction made of thermoplastic composites with continuous glass fiber reinforcement (UD tapes). It provides high protective performance with low weight and fully recyclable material. It acts as a physical barrier in EVs, preventing objects from penetrating the battery during accidents. Its ther...

News  Updated at: 2025/12/04

cent study by Munro & Associates showcased various benefits of the QNX Sound platform. These benefits include the reduction of hardware costs by up to USD 98 per model; the reduction of printed circuit board surface area by up to 44%, enabling more space and the use of smaller hardware systems; and weight savings of up to 28%, improving vehicle efficiency and potential EV range. (QNX press release on December 2, 2025)...

News  Updated at: 2025/12/03