new automotive heating device that heats surfaces and uses radiant heat to warm only the occupants. It contributes to reducing air-conditioning energy consumption and extending the driving range of electric vehicles (EVs). It is designed to instantly lower the surface temperature even if the human body comes into contact with it to ensure safety. (From an article in the Nikkan Jidosha Shimbun on December 25, 2025)...

News  Updated at: 2025/12/25

the InnovizThree LiDAR. InnovizThree was designed with slimmer dimensions and lower power consumption. InnovizThree will be demonstrated live for the first time at CES 2026. It has a superior long-distance accuracy and perception, with detection ranges extending beyond 250 meters. It has a slimmer body, only 600 grams in weight. Itssmaller lateral dimensions allow seamless deployment into the roof interior, behind the windshield, and in the fron...

News  Updated at: 2025/12/24

Maruti Suzuki, India Fronx gets one star ANCAP rating On December 22, the made‑in‑India Suzuki Fronx was awarded a one‑star safety rating by ANCAP after the test body recorded poor crash‑test performance and a serious rear seatbelt failure in its latest assessment for Australia and New Zealand. The rating applies to all Fronx variants introduced in New Zealand from June 2025 and Australia from August 2025, remains valid until December 203...

News  Updated at: 2025/12/24

Foton AUV unveils intelligent bus in Beijing On December 18, Foton AUV unveiled an intelligent bus in Beijing. The Foton AUV intelligent bus is designed with ultra-short front and rear overhangs to maximize the interior space, where passenger vehicle-oriented features, such as a wrap-around cockpit, one-piece body sides, and hidden air conditioner vents, are incorporated. The Foton AUV intelligent bus integrates V2X (Vehicle to Everything), big d...

News  Updated at: 2025/12/24

V travel at motorway speeds is possible. Renault improved aerodynamics by reducing drag from 0.40 to 0.30 through changes to the wheels and air intakes. Renault Filante Record 2025 acts as a test vehicle for new technologies. The demo car uses steer-by-wire and brake-by-wire systems, a carbon-fibre body, aluminium alloys, 3D-printed Scalmalloy, and low-rolling-resistance Michelin tires. The powertrain, chassis, and carbon structure were developed...

News  Updated at: 2025/12/23

UR 207 million, with closure expected by Q1FY27 (ending March 2027). The total revenue of AutoElectric for CY 2024 was EUR 749 million. The PVs contributed approximately 81% while CVs contributed 19% to CY 2024 revenues. Its product portfolio spans low-voltage and high-voltage powertrain harnesses, body harnesses, specialty harnesses, and components. The company is well-positioned for evolving powertrain mixes, including ICE, hybrid, and EVs. Aut...

News  Updated at: 2025/12/23

as Vegas, the U.S. At the show, the company will unveil its Distributed HVAC (Heating, Ventilating, and Air Conditioning) for the first time as a system that uses artificial intelligence (AI) to provide each passenger with an optimal temperature. The HVAC uses a method to analyze each passenger’s body temperature, the external environment, and user data to control itself independently. Also, as the next-generation driveline components, Hyundai ...

News  Updated at: 2025/12/23

ined assisted driving system for commercial vehicles, a perception network of seven cameras, five radars, and one LiDAR, and high-precision positioning and map systems, the Beacon covers 114 scenarios in 26 categories and offers 22 driver assistance features. Available in 15 variants with a vehicle body length of 2.9m or 3.6m, a battery capacity of 225kWh, 451kWh, or 677kWh, and a liquid (capacity greater than or equal to 80kg) or gaseous hydroge...

News  Updated at: 2025/12/22

e he confirmed that Ram will be reviving the Dakota nameplate for its new midsize pickup for the U.S. market. Ram has not revealed too many details about the midsize Dakota yet, other than production is moving to Toledo Assembly Complex from previously-planned Belvidere Assembly Plant. It will be a body-on-frame vehicle, separate from the Jeep Gladiator built there, as well as the Wrangler. The Ram Dakota will start pre-production in 2027 before ...

News  Updated at: 2025/12/20

nce computing (HPC) platform, in-vehicle infotainment (IVI) systems, ADAS, and telematics control units (TCUs) at CES 2026. To demonstrate the centralized computing power and system integration capabilities of the HPC platform, FIH will present an interactive demo vehicle. The HPC platform supports body control functions, IVI, and ADAS integration. It streamlines the traditional Electronic Control Unit (ECU)-intensive distributed architecture by ...

News  Updated at: 2025/12/19

Kia America announces all-new K4 Hatchback pricing ahead of early 2026 launch On December 18, Kia announced pricing for the all-new 2026 K4 Hatchback, a new body style with added cargo versatility and a roomier interior, that joins the K4 sedan at U.S. dealerships in early 2026. As affordability becomes an important issue in the U.S., the entry-level FWD K4 EX starts at USD 24,890, with the K4 GT-Line starting at USD 25,890 and the K4 GT-Line Tu...

News  Updated at: 2025/12/19

BMW prepares Munich plant, Germany for all-new i3 model from 2026 On December 18, BMW announced that its Munich plant, Germany is now prepared to produce the next generation of vehicles. New equipment has been installed in the body shop and assembly line, and all systems have passed initial functional tests. During these tests, all production steps are run without real parts, creating a “virtual” vehicle. This ensures every system works smoot...

News  Updated at: 2025/12/18

The DM-p (Dual Motor Performance) configuration delivers up to 480 HP (Combined Power) through its intelligent All-Wheel Drive (AWD) system.  Measuring over 5 meters in length with a 2,950mm wheelbase, the ATTO 8 provides ample space for seven adults across three rows. It comes with BYD's Cell to Body (CTB) structure, which integrates the ultra-safe BYD Blade Battery directly into the high-strength frame for enhanced structural integrity. Based...

News  Updated at: 2025/12/18

d guided vehicles to enhance logistics efficiency and warehouse utilization. For green operations, the plant buildings are designed with conditions for distributed photovoltaic power generation, and are equipped with a sewage treatment and reuse system for cyclic utilization of wastewater. The main body features a prefabricated steel structure to reduce building material consumption and shorten the construction period. The new site contains auxil...

News  Updated at: 2025/12/18

Japanese government reveals draft revision of automotive body taxes The Japanese government and ruling party revealed their draft proposals for the revision of automotive body taxes on December 16. While the draft includes a two-year extension of the “eco car subsidy” period, the tax reduction standards will become more stringent. Meanwhile, the “environmental performance levy” on (kei) mini vehicles will be frozen for two years. The gove...

News  Updated at: 2025/12/17

er 2025. The Lepas vehicles are built on the all-new LEX platform, upgraded by Chery Group. It supports both electric (NEV) and traditional (ICE) vehicles. The LEX platform gives the Lepas range several key advantages: Spacious and Comfortable Interiors: The L4 has a 2,700mm wheelbase in a 4,400mm body, and the L8 has a 2,800mm wheelbase in a 4,688mm body. Smooth Performance: The 1.5T engine delivers 115kW and 235Nm of torque, with tuned dynamic...

News  Updated at: 2025/12/16

well as futuristic healthcare products. The exhibit features our "FLESBY HY-CONCEPT," a concept car designed for the future. We envision this car, which uses hydrogen energy, to form a seamless connection between mobility and daily lifestyles. Various on-board technologies are on display, such as "body signage functions" and "pop-up fenders." The "portable hydrogen cartridges", which weigh about 8.5 kg each, have been installed in the concept ca...

News  Updated at: 2025/12/16

of the BAIC X55 and BJ40, with series production due in January 2026. MG pilot production is scheduled for February 2026.  EPMB’s assembly operations are supported by its integrated component plants across Kedah, Perak, Selangor, and Melaka. A Phase 3 expansion, due by Q3 2026, will add in-house body painting to boost localization and will be built adjacent to its Phase 2 facility.  EPMB said the expansion reflects strong OEM partnerships, in...

News  Updated at: 2025/12/16

t will be built in phases and can scale up to 350,000 vehicles annually for domestic and future export markets. Phase 1 involves over USD 300 million in investment and delivers an initial capacity of 50,000 vehicles annually, supported by highly automated, fully integrated production lines covering body welding, painting, assembly, quality inspection, and logistics. VinFast targets localization rates of over 40% by 2026, 60% by 2029, and 80% from...

News  Updated at: 2025/12/16

experience designed for city use. For testing, smart has fitted the new platform into existing fortwo bodies to create realistic test vehicles. These prototypes are being tested at smart’s R&D facilities around the world. At a test site in China, engineers are fine-tuning ride comfort, handling, body strength, and braking. Other locations are testing crash safety, suspension durability, battery performance, software, and climate systems in dif...

News  Updated at: 2025/12/15