e Technology and Research Center Co., Ltd. (CATARC). Covering a land area of approximately 64,700 square meters and a total investment of approximately CNY 600 million, the project will proceed in two phases. Laboratories for battery charging/swapping technologies and electromagnetic compatibility (EMC) will be completed by the end of September 2026, with commissioning expected at the end of October 2026. Those for e-drives, electronic controller...

News  Updated at: 2026/03/23

Fiem Industries, India commissions EMI/EMC testing lab at Gurugram R&D centre On March 16, 2026, Fiem Industries announced that it had commissioned a new Electromagnetic Interference (EMI) and Electromagnetic Compatibility (EMC) testing laboratory at its R&D–Electronics, Innovation Centre, and corporate office in SP Infocity, Udyog Vihar Phase-1, Gurugram. The facility is intended to support the company’s automotive lighting electronics busin...

News  Updated at: 2026/03/17

rations. The solution supports BLE 6.0 protocol, dual-mode positioning via Channel Sounding and RSSI, and UWB Channel 5 and 9 with time-of-flight-based positioning for higher accuracy.   The AP002 smart key solution is designed for NFC card-based vehicle access. It meets environmental, mechanical, EMC, and protection requirements for in-vehicle complete units. The NFC reader controller fulfils CCC Digital Key requirements and complies with NFC F...

News  Updated at: 2026/03/05

rate battery simulation, charging, discharging, and performance analysis. For production testing, Rohde & Schwarz will present a rack-mounted setup with R&S MXO 5C oscilloscope and PVT360A performance vector tester. The company will show tools that help engineers improve energy efficiency, speed up EMC testing, debug digital protocols faster, and meet wireless regulations. Based on Rohde & Schwarz press release...

News  Updated at: 2026/02/27

s while meeting functional safety requirements. The TJA1410 enables the implementation of advanced capabilities such as AI-enabled sensor fusion and over-the-air updates in next-generation SDVs. The device is compliant with ISO 26262 ASIL B standards and offers strong electromagnetic compatibility (EMC) performance, low quiescent current, remote wake capability, and compatibility with cost-efficient CAN FD common-mode chokes. (From a press releas...

News  Updated at: 2026/02/26

isted pair (UTP) or low-cost Coax channels. It is powered by Valens’ VA7000 A PHY chipsets. The cameras enable OEMs to significantly reduce the cost and complexity of their wiring harness while retaining high image quality for ADAS and autonomous applications. By leveraging the high bandwidth and EMC robustness of the VA7000, based on the MIPI A-PHY standard technology, the MCNEX modules deliver reliable multigigabit performance over simple cab...

News  Updated at: 2026/02/19

ediaTek. The R&S CMX500 empowers customers in Japan to test and optimize the entire NTN integration chain — from chipsets and modules to antennas, TCUs, and vehicles — and validates NTN vehicle connectivity tailored to the Japanese market. The new office has a dedicated space for calibration of EMC equipment. ADI, a global semiconductor leader, is working closely with Rohde & Schwarz globally to advance the adoption of the emerging OpenGMSL s...

News  Updated at: 2026/01/12

a and export markets, such as ASEAN and Middle East regions. At the Battery & Powertrain Integration Testing Center can test up to 500 battery systems a year, along with e-drive units, thermal systems, electronics, and battery cells. The Platform & Module Testing Center follows the same process. An EMC lab checks electronic reliability, and a durability bench simulates global driving conditions. Together with the City Test Track, Volkswagen now h...

News  Updated at: 2025/11/25

to monitor temperatures in key EV components like inverters, motors, and HVAC systems. The SMD FIR MLX90637 provides several advantages over the traditionally used negative temperature coefficient (NTC) thermistors. The MLX90637’s built-in galvanic isolation improves safety in EVs, and its strong EMC performance avoids noise issues found in NTC wiring. The sensor is also durable, operating reliably in temperatures from -40°C to 125°C. Based o...

News  Updated at: 2025/11/20

NSK develops electrical bypass plate On October 20, NSK Ltd. (NSK) announced that its subsidiary NSK-Warner K.K. (NSK-Warner, Fukuroi City, Shizuoka Prefecture) has developed an “electrical bypass plate” that suppresses electrical erosion and provides electromagnetic compatibility (EMC) for bearings. The plate is inserted between the bearing and the housing that holds it, preventing current from flowing to the rolling elements inside the bear...

News  Updated at: 2025/10/23

y’s internal departments, now offers testing services to external clients across the automotive, naval (radar), and aerospace industries. Located in Iași, Sibiu, and Timișoara (Romania), the laboratories perform over 3,000 reliability tests and approximately 1,500 electromagnetic compatibility (EMC) tests annually, supporting qualification activities for over 400 AUMOVIO projects. The facilities hold ISO/IEC 17025 accreditations for 19 climat...

News  Updated at: 2025/09/29

Fiem Industries, India, wins business from Force Motors, invests in electronic validation laboratory On August 14, Fiem Industries Limited, in an investor update, announced that it has received development orders for three additional products from Force Motors. The products are now under development. The company is also investing in an EMC/EMI electronic validation laboratory. It is under installation right now. The facility is the first of its k...

News  Updated at: 2025/08/21

Stellantis recognizes DEKRA Automotive EMC laboratory in Taiwan On August 20, DEKRA announced that its EMC Laboratory in Taiwan has been officially approved by Stellantis, making it the third DEKRA site worldwide, alongside Italy and Korea. With this approval, DEKRA Taiwan is now authorized to provide EMC testing for 16 Stellantis brands. In Taiwan, DEKRA’s Automotive EMC Laboratory is also approved to provide testing services for GM, Volkswage...

News  Updated at: 2025/08/21

ity and harsh weather, enhancing driving safety, (ii) the KESSY intelligent car access system, which offers seamless vehicle entry using advanced RF positioning and hands-free trunk operation; and (iii) an accelerator pedal sensor based on CIPOS technology, which improves driving responsiveness and EMC stability for safe and smooth control. (From FORVIA HELLA social media updates on July 26, 2025) ...

News  Updated at: 2025/07/30

Rosenberger, Germany, presents modular camera connection solutions for automotive applications On July 1, Rosenberger Hochfrequenztechnik presented its new modular camera connection solutions. Designed specifically for automotive applications such as ADAS, driver monitoring, and autonomous driving, these solutions offer high data transmission rates, flexible integration options, and excellent EMC shielding.  Rosenberger’s new connection soluti...

News  Updated at: 2025/07/02

Alps Alpine completes new laboratory building at Iwaki Development Center On June 2, Alps Alpine Co., Ltd. (Alps Alpine) announced that it has completed the construction of a new electromagnetic compatibility (EMC) testing laboratory building at its Iwaki Development Center (Iwaki City, Fukushima Prefecture). The new laboratory building will begin partial operations in June 2025 and will be fully operational starting at the end of March 2026. Alp...

News  Updated at: 2025/06/05

designed to support the evolving needs of the mobility sector. The new center brings comprehensive ranges of automotive testing, validation, and certification services in North America under one roof. The services will include electric vehicle (EV) testing, automotive electromagnetic compatibility (EMC), reliability testing, automotive connectivity technologies, and Digital Trust Services, spanning cybersecurity, functional safety, and AI testing...

News  Updated at: 2025/05/28

Cygni Energy, India opens 4.8 GWh battery plant On April 21, Cygni Energy Private Limited inaugurated Phase I of its battery energy storage system (BESS) gigafactory in Maheshwaram, Telangana. Located in the Electronics Manufacturing Cluster (EMC), the 160,000 sq ft facility on a 5-acre site has an initial capacity of 4.8 GWh. The plant supports grid-scale and EV storage applications and features a fully automated assembly line with Poka-Yoke-ena...

News  Updated at: 2025/04/30

UL Solutions to open advanced automotive EMC laboratory in Toyota City, Japan On March 16, Northbrook, Illinois-based UL Solutions Inc. announced plans to develop a new advanced automotive electromagnetic compatibility (EMC) laboratory in Japan, to provide testing to help manufacturers protect against electromagnetic interference that can cause critical systems, such as vehicle braking and engine controls, to malfunction. Formally known as the UL...

News  Updated at: 2025/03/18

the power density to 4.2kW/L and keep the weight below 5kg. The CharCON5U employs silicon carbide elements for high-voltage LLC and DC-DC to reduce switching losses and deliver an average OBC efficiency of over 94%. The CharCON5U supports V2L (Vehicle to Load) and FOTA A/B bank, meeting the ECER10 EMC and ASIL D standards. (From a UAES press release dated February 18, 2025)...

News  Updated at: 2025/02/24