million. The vehicle is locally assembled in Lahore and is powered by a 43 kWh MG Ultra-Safe LFP battery driving a front-wheel-drive motor producing 110 kW and 250 Nm of torque, with a 0–100 km/h acceleration of 9 seconds and a WLTP combined cycle range of 316 km. DC fast charging via CCS Type 2 connector charges the battery from 10% to 80% in approximately 28 minutes, while the on-board AC charger is rated at 6.6 kW. Its equipment includes a...

News  Updated at: 2026/05/19

ducts achieve low on-resistance (RDS(ON)).  The RDS(ON) for the XPH2R608QB is 2.55mΩ (max.) with a total gate charge (Qg) of 95nC (typ.), and 3.9mΩ (max.) and 63nC (typ.) for the XPH3R908QB – both with a gate-to-source voltage (VGS) of 10V (max.). Additionally, the SOP WF package with a copper connector structure reduces MOSFET package resistance, improving efficiency, enhancing heat dissipation, and increasing reliability.  These MOSFETs a...

News  Updated at: 2026/05/14

other investors brings total funding raised to date to USD 56 million. The Rocsys M1 combines AI-enhanced computer vision for precise, continuously improving plug-in performance and motion intelligence for safe, context-aware operation. The Rocsys M1 is fully interoperable across EVs, chargers and connector types. An overhead rail-mounted design with a flexible, long-reach robotic arm enables reliable connection and disconnection across mixed fl...

News  Updated at: 2026/05/01

endment introduces stricter domestic manufacturing requirements for three key components, i.e., Battery Management System (BMS), DC-DC Converter, and Vehicle Control Unit (VCU). From September 1, 2026, domestic manufacturing of BMS must include assembly of electronic components, semiconductors, and connectors on the PCB, along with wiring, connector fitment, heatsink fitment, enclosure fitment, and software/firmware flashing. Imports of BMS will...

News  Updated at: 2026/04/30

PG&E and Tesla evaluate AC vehicle-to-grid charging in California On April 20, Pacific Gas and Electric Company (PG&E) and Tesla announced that the Tesla Cybertruck, Tesla Powershare Gateway and Tesla Universal Wall Connector have been approved for participation in PG&E's residential Vehicle‑to‑Everything (V2X) program, marking a milestone for bidirectional EV integration in California. While PG&E has a growing list of participating companies...

News  Updated at: 2026/04/24

JST Corp., Japan invests USD 500 million for connector plant in Guntersville, Alabama On April 17, JST Corp. based in Osaka, Japan, announced plans to invest USD 500 million to expand in Guntersville, Alabama by building an AI-driven automation-based 540,000-square-foot facility on a 240-acre property next to Lake Guntersville. Based on extensive robotic systems, every phase of production will be part of an automated process including injection m...

News  Updated at: 2026/04/21

,995 to 18,850 lbs. in gross vehicle weight (GVW) for Canadian customers, with electric range up to 177 km (for M size variant with 2 battery packs) and up to 257 km (L size variant with 3 battery packs) on a single charge. RIZON trucks are capable of being charged via DC Fast Charging (with a CCS1 connector) and Level 2 AC Charging (with a J1772 connector). (RIZON Truck release on April 17, 2026)...

News  Updated at: 2026/04/18

driver to select optimal driving characteristics according to the driving conditions and their preferred driving style. The all-new Insight realizes a range per charge of 535 km in WLTC mode, and a charging time of approximately 40 minutes with fast charging. With the use of the Honda Power Supply Connector, an external AC power output device, the all-new Insight can output electricity of up to 1,500W. The all-new Insight comes standard with Hon...

News  Updated at: 2026/04/16

imizes current distribution to provide a transmission channel for the fuel gas and the oxidant, with an actual pressure drop close to zero. Its elastic framework absorbs thermal cycling stress and volume changes during the oxidation-reduction process, reduces the risk of contact failure between the connector and the electrode, and maintains stable surface resistivity with a three-dimensional porous structure.(From a Corun press release dated Marc...

News  Updated at: 2026/04/10

image transmission demonstration using what the companies describe as the world’s first flexible waveguide developed with Japan’s traditional kumihimo (braided cord) technique. The demonstration highlighted how merging long-standing Japanese craftsmanship with Yokowo’s compact high-frequency connector system can enable a new class of millimeter wave (mmWave) connectivity solutions. The showcase allowed visitors to observe stable, high spee...

News  Updated at: 2026/03/27

Hirose Electric to establish new automotive connector plant in India Hirose Electric Co., Ltd. (Hirose Electric) announced it will establish a new plant in India to produce automotive connectors and other products. The company aims to strengthen its supply capacity for products for the Indian domestic market and neighboring regions, where demand is expected to grow. Partial operations are scheduled to begin in the summer of 2027. The initial inve...

News  Updated at: 2026/03/23

Denza’s first dealership in Brazil to install BYD Flash ultra-fast charger On March 11, it was reported that BYD's Denza brand, operated by Grupo Saga, inaugurated its first dealership in Brasília, marking the brand’s first location in Brazil to feature a BYD Flash ultra-fast charger, scheduled for installation in the first half of the year. The Flash charger delivers 1,500 kW per connector and enables battery charging from 10% to 70% in fiv...

News  Updated at: 2026/03/13

e-range intelligent thermal management system, which allow for less heat generation and more efficient, uniform heat dissipation to ensure that FLASH Charging has little impact on its lifespan. To unlock the FLASH Charging rate of the Blade Battery 2.0, BYD developed the FLASH Charger with a single-connector charging power of 1,500kW, the highest among mass-produced single-connector charging stands in the world. Different from conventional public...

News  Updated at: 2026/03/10

nd 11.6 kgf.m. Combined output reaches 184 hp and 31.2 kgf.m of maximum torque. The ALLGRIPe AWD system distributes torque automatically between the axles. The SUV is equipped with a 61-kWh lithium-ion battery, providing a range of 293 kilometers (Inmetro). Charging options include a 7 kW AC Type 2 connector, allowing a 10% to 100% charge in approximately 9 hours, and a 150 kW DC CCS2 fast charger, taking 45 minutes to go from 10% to 80%. Inside,...

News  Updated at: 2026/03/06

supply system can be used as a power source, making it possible to utilize the electricity stored in the large-capacity battery for purposes beyond driving, such as using household appliances outdoors. Alongside in-vehicle use via the outlet installed in the luggage area, the included vehicle power connector can be plugged into the standard charging inlet for use as a 100V external power socket providing up to 1,500W total. In addition, the vehic...

News  Updated at: 2026/02/19

Japan Aviation Electronics develops new connector for automatic charging of autonomous mobile robots Japan Aviation Electronics Industry, Ltd. (Japan Aviation Electronics) announced on February 17 that it has started sales of its newly developed “DW15 Series” connector for automatically charging autonomous mobile robots. The DW15 Series connector ensures reliable and efficient charging and supports the introduction of robots. For stable opera...

News  Updated at: 2026/02/19

’s high-speed capability ensures seamless communication for ADAS and autonomous driving features.  With support for key automotive protocols such as Ethernet, MIPI A-PHY, GMSL2/3, FPD-Link III/IV, APIX, and HDBase-T, the HFM platform provides a versatile path for next-generation architectures. HFM connectors include integrated secondary locks (ISL), optional connector position assurance (CPA), and durable shielding for EMI protection.  Based ...

News  Updated at: 2026/02/10

nt. The company is expanding these methods to improve efficiency and reduce costs. Audi Hungaria team reviews its entire value chain to find areas for digitalization. AI is now used from planning and production to quality control. AI applications include fuel cap detection, gear surface inspection, connector assembly checks using sound analysis, and support for accounting tasks through language models. Based on Audi Hungaria press release...

News  Updated at: 2026/01/28

Abbotsford, Pitt Meadows, and Tsawwassen hubs are introducing a four-cable charging solution that eliminates a common challenge for EV drivers: wondering whether a charging stall will be compatible with their vehicle.  Unlike traditional charging stations where drivers must search for a compatible connector, the Mercedes-Benz Charging Network features Alpitronic HYC 400 chargers equipped with four cables at every stall—offering both Combined C...

News  Updated at: 2026/01/16

hile reducing costs and weight. The bond wire provides a fuse function for wire protection. The system integrates temperature sensors for thermal monitoring, while its mechanical frame ensures robust connection and simplifies assembly. Additional features include flexible pinning options at the ECU connector and more sustainable production enabled by additive manufacturing. (From Leoni social media updates on January 13, 2026)...

News  Updated at: 2026/01/14