The powertrain will be featured on the sixth-generation 2026 Jeep Cherokee and is expected to produce 210 hp and 230 lb-ft of torque. The engine has a high-pressure direct inject fuel system and produces 177 hp and 221 lb-ft of torque. The turbocharger provides up to 38 psi of boost while a liquid charge air cooler reduces intake air temperature for improved performance. Electric pumps are used for the engine, battery cooling systems, and air co...

News  Updated at: 2025/08/23

Modine announces sale of three ICE component businesses in Germany Modine announced that it has signed a definitive agreement to sell three Modine businesses based in Germany to affiliates of Regent LP. Located in Neuenkirchen, Pliezhausen and Wackersdorf, the businesses manufacture exhaust gas recirculation coolers, radiators and charge air cooler modules for automotive internal combustion engine applications in Europe.  The sale is expected to...

News  Updated at: 2023/09/07

The main difference from its predecessors is the air-to-air charge air cooling system and an 813 mm fan with an electrically controlled viscous clutch. The Kirovets K-7M tractor, for which the engine is intended, has also been upgraded. It will also use a new radiator block, including an air-to-air charge air cooler. Tests of the K-7M tractor were carried out with the testing of the cooling system with different versions of the tractor lining and...

News  Updated at: 2022/06/14

nd Cadillac Escalade.This engine features an aluminum head and engine block (with cast-iron cylinder liners), a DOHC valvetrain configuration, a bore and stroke of 84mm x 90mm, and cranks out 277 horsepower and 460 lb.-ft of torque. It has a compression ratio of 15.0:1 and utilizes an air-to-liquid charge air cooler (intercooler).In the Silverado 1500, where it is mated to a 10-speed automatic transmission, the “baby DMAX” returns 23/31/26 MP...

News  Updated at: 2021/11/24

ElringKlinger develops front-end module carrier for Lucid Motors' Air ElringKlinger AG (ElringKlinger) announced that it has developed an innovative front-end module carrier, which is used in a vehicle produced by US electric car manufacturer Lucid Motors for its first electric vehicle model Air. The front-end module support, which is manufactured in a hybrid design, can act as a support for the charge air cooler, the headlamp modules, the spray ...

News  Updated at: 2021/10/11

affordable plastic fuel cell stack. The plastic fuel cell stack from Novares offers an impressive weight saving of 35% and a cost saving of 25% compared with the standard metal alternatives. The fuel cell stack design was based on experience gained during the development of Novares’ Plastic Water Charge Air Cooler, where valuable lessons were accumulated on high performant material in critical environment. The fuel cell stack was chosen specifi...

News  Updated at: 2020/12/08

SML Isuzu exhibits three bus in ‘Prawaas-2019’ at India On July 25, SML Isuzu informed that it showcases and exhibits three buses at ‘Prawaas-2019’ event, including two new models.The new Executive Lx Coach, with longer wheelbase (5,100 mm) and more powerful engine (85 kW), has seating capacity range from 25+1 to 38+1. The BS-IV complaint Direct injection turbo-charged with inter cooler (In line 4 cylinders) engine has capacity of 3,455 c...

News  Updated at: 2019/07/29

e is developing a highly effective, multilayer filter medium. The company developed the compressor using special high-speed roller bearings lubricated with grease, a flat membrane humidifier to ensure that the supplied air is humidified reliably and special soldering process that not only makes the charge air cooler very durable but also prevents ionization of the coolant. This is helping to reduce technological barriers and improve the suitabili...

News  Updated at: 2018/09/11

y for all diesel vehicles, post 2020, have been identified as a new product line with the potential to contribute significantly to the revenue and profitability. Swing arm and trailing arm supplies are initiated from the Aurangabad plant. As OEMs move to lighter thermoplastics, improved variants of charge air cooler ducts and plastic fuel filler pipes are being readied for supply. In order to stay ahead of the curve, Lumax has invested in establi...

News  Updated at: 2018/08/01

DSM plastics successfully replace metal in charge air cooler end cap application DSM announced on September 25 that it has partnered with leading automotive system supplier, Mahle GmbH, to replace metal end caps with high-heat-resistant plastics in charge air cooler (CAC) applications. This change has led to improved engine performance, better fuel efficiency and reduced system costs.Metal end caps in CAC applications must withstand continuous te...

News  Updated at: 2017/10/04

BASF supplies Ultramid Endure for MANN+HUMMEL charge air ducts BASF announced that its high-temperature polyamide Ultramid Endure D5G3 BM is being used by MANN+HUMMEL in the manufacture of the charge air ducts for the 2.0-liter four-cylinder turbo engine for the BMW Group. The turbocharger with integrated charge air cooler is used in the BMW 4, 5 and 7 series as well as X3, X4 and X5 models of the BMW Group. With Ultramid Endure D5G3 BM, charge a...

News  Updated at: 2016/10/14

Valeo unveils world-first water-cooled electric supercharger Valeo S.A. of France unveiled its water-cooled electric supercharger for the first time in the world on May 20, 2015. The electric supercharger's water-cooled charge air cooler efficiently cools the motor to drive the turbine. Conventional air-cooled type coolers have low cooling performance while a car is stopped. Valeo achieved the high performance of the electric supercharger which p...

News  Updated at: 2015/05/21

DSM develops first plastic air intake manifold with integrated charge air cooler with excellent heat resistance DSM Japan Engineering Plastics (in Minato-ku, Tokyo) announced that Royal DSM has developed a new plastic air intake manifold with integrated liquid-cooled charge air cooler. The world's first plastic liquid-cooled charge air cooler is almost entirely made of plastic except its core part. The new plastic liquid-cooled charge air cooler ...

News  Updated at: 2014/09/29

Delphi develops lightweight Cooling Module Delphi Automotive LLP announced that its Front-End Cooling Module, which combines the radiator, charge air cooler, condenser and fan-motor-shroud assembly, can provide a weight savings of 4 kg as well as reduce the electrical power consumption of the cooling fan by 350W. (From a press release on August 25, 2011)...

News  Updated at: 2011/08/25

Dana Holding Corporation debuted its all-new water-cooled charge air cooler on the 2011 Ford F-250 pickup truck. The truck features Ford Motor Company's all-new 6.7 liter Power Stroke(R) V-8 turbocharged diesel engine. Dana is manufacturing the water coolers at its Mount Forest, Ontario, Canada facility. (From a press release on September 21, 2010)...

News  Updated at: 2010/09/19