oning for optimal charging performance. “Proper alignment is critical when it comes to wireless charging,” Matt Zimmerman, manager of Research and Development at Nissan Technical Center North America, said. “Even a few millimeters can cause a big drop in performance.” The charger includes a cooling fan to reduce heat generation in both the charging pad and phone, enabling the system to deliver up to 15 watts of consistent power, compared ...

News  Updated at: 2025/12/19

ear are a 2.4kW battery for North America and a 1.5kW battery for Japan. In order to flexibly accommodate the different locations where the batteries can be installed on vehicles, we had to make the height of the batteries as low as possible. The biggest challenge was dealing with the height of the cooling fan. Nevertheless, we overcame this obstacle by revising the structure and the fan itself. These batteries were originally developed for use i...

News  Updated at: 2025/12/17

llo van plant in Mexico. According to recall documents on the U.S. National Highway Traffic Safety Administration (NHTSA) website, demanding fleet duty cycles may cause premature bearing wear, a condition that leads to high current draw, that combined with inadequate fuse protection on the 400-watt radiator fan circuit, increases the possibility of a vehicle fire. MAHLE Thermal and Fluid Systems GmbH &CO from Germany was the supplier of the fan m...

News  Updated at: 2025/10/28

NPK Avtopribor, Russia raises funds to produce electric motors for ABS, ESP and engine cooling systems On June 19, the Industrial Development Fund (IDF) announced that it would provide a preferential loan in the amount of RUB 930 million to NPK Avtopribor to produce electric motors for hydraulic pumps for ABS and ESP systems, as well as motors for engine cooling radiator fans. The total investment in the project will be RUB 1.2 billion.  NPK Avt...

News  Updated at: 2025/06/20

e advanced stages of creating BLDC motors (Brushless DC motors) for a range of automotive uses, such as seat ventilation, battery cooling, and engine cooling. By Q2 of FY 26 (July-September 2025), advanced BLDC motors should be launched.  IFB also announced that it has started production of engine cooling fan motors for the Nexon application and a few more new product launches will take place by Q4 of this financial year (January -March 2025). I...

News  Updated at: 2024/11/04

and related manufacturing infrastructure. The company will spend EUR 12 million to further expand the development and testing of e-drives, while around EUR 36 million spent to expand the capacity of assembly lines for a new generation of several product types (air conditioning blower motor, engine cooling fan, eBike drive) and create capacity to serve production of the newly developed products. These investments will create 170 new jobs. (From ...

News  Updated at: 2023/09/12

NTN to promote Hydrodynamic BEARPHITE bearings for use in automotive cooling fan motors NTN Corporation (NTN) will promote its proprietary developed “Hydrodynamic BEARPHITE” fluid-dynamic bearings for use in automotive cooling fan motors. NTN’s BEARPHITE bearings have been primarily used in consumer products, but automotive use of the products will be promoted because of an expected need for quietness caused by the shift to electric vehicle...

News  Updated at: 2023/06/27

nd multiple configurations of flexible interiors. Presented solutions feature best-in-class acoustics, reduced weight, and improved in-seat packaging, tailor-made to accommodate a BEV environment with simplified wire harnesses and electronic control unit systems. In addition, Brose will introduce a cooling fan module with integrated heat exchangers and new drive concepts for e-scooters. (From a press release dated September 12, 2022)...

News  Updated at: 2022/09/13

models in the I&LCV (Intermediate & Light Commercial Vehicle) range i.e., LPK 610, LPT 709g XD, SK 710 tipper, Ultra T.12g, Ultra K.14, LPT 1512g, and Ultra T.16 Cx. These models feature significant technological advancements which include optimized drivelines, low viscous rear axle oil, e-viscous radiator fan, gearshift advisor, and low rolling resistance tires. The M&HCV and I&LCV range of trucks from Tata Motors come equipped with Fleet Edge ...

News  Updated at: 2022/09/05

Brose starts production and R&D activities in Pančevo, Serbia The Development Agency of Serbia announced that Brose Fahrzeugteile SE & Co. KG announced (Brose) has officially started the production on the site in Pancevo. It is an investment of EUR 180 million. The modern plant covers 63,000 square meters and it is home to two production lines - drives for cooling fan modules and motors for steering systems and oil pumps, and to the company’s ...

News  Updated at: 2021/10/19

sions and improving fuel economy. Eaton’s 48V technologies include motor generators and inverters which generate power for the vehicle. Eaton is developing power electronics for 48V electric catalyst heating to reduce NOx emissions. Other 48V systems under development include an electrical engine cooling fan and electric air conditioning compressor. Finally, Eaton is also developing 48V energy storage solutions including lead-acid batteries and...

News  Updated at: 2021/08/18

will be eight percent while the figure for gas buses will be up to 15 percent. Further fuel savings can be obtained with the Scania Opticruise on suburban low-entry buses. Fuel efficiency is also positively affected by the improved air drag, Cruise Control with Active Prediction (CCAP), electrical cooling fan, SCR only aftertreatment, and reduced weight. (Scania press release on October 17, 2019) ...

News  Updated at: 2019/10/24

automotive industry with the "Future Brose" program, which will change the company's structures by 2023. There will also be staff adjustments in various areas of the company. They will affect dismantling as well as job creation. Brose decided to set up a new location in Serbia to produce motors for cooling fan modules. Brose expects production to start in two years. In 2024, it will already employ around 1,000 people there. In the next three year...

News  Updated at: 2019/09/11

acture of injection Moulded plastic components for the automotive industry. The product portfolio includes exterior systems (such as front and rear bumper systems, overhead systems, side wall systems, acoustic management and seating systems) and hood systems (such as air dams, nozzle defrosters and radiator fan blades). Sintex Plastics press release...

News  Updated at: 2019/05/22

arm to be affixed to the rear of the engine contributes to stability.Few noteworthy elements like largest brake disc in class, more rigid front fork and sporty riding position which can accommodate a wide range of rider sizes and riding situations make Ninja 400 very unique. Besides a cover for the radiator fan directs engine heat away from the rider, contributing to rider comfort. Kawasaki press release...

News  Updated at: 2018/04/04

on for the construction of the facility and the purchase of equipment. The governor also reported that the state of Queretaro is home to 172 automotive suppliers. Headquartered in Germany, Brose has had a presence in Mexico since 2010. The company manufactures HVAC blowers, window regulator drives, cooling fan motors, steering component motors and several other components for automakers such as Volkswagen, Ford, GM, Nissan, Honda, Chrysler, Daiml...

News  Updated at: 2018/04/02

uality Excellence Award 2015". Ford honored the plant with its "Q1 Award". Brose India also received Ford's "Q1 Award". In addition the plant was presented with the General Motors "Supplier Quality Excellence Award". Brose received multiple "Ford Q1 Awards": the supplier manufactures around 550,000 cooling fan modules and HVAC motors each year for the customer at its Mexican location in Queretaro El Marques. In Puebla, Brose manufactures close to...

News  Updated at: 2016/04/01

zburg, Germany to measure electromagnetic compatibility (EMC). The centerpiece of the 120 square meter test center is its anechoic chamber equipped with metal shielding. The EMC center also has a test bench for electrostatic discharging and a room to test electrical impulses for electronics such as cooling fan modules or door control units. Brose test engineers check the electromagnetic compatibility of up to 100 products of its door systems, sea...

News  Updated at: 2014/05/21

olkswagen Golf. In addition, the new Volkswagen Golf is equipped with a number of other Bosch technologies, including the car's diesel injection system, its engine control unit, injection valves for gasoline direct injection, the start-stop system, the alternator, the wiper system, and the engine's cooling fan, as well as a broad range of sensors. (From a press release on May 15, 2013)...

News  Updated at: 2013/05/15

April in Shanghai.The focus on the exhibit is to show new products focusing on motion solutions for fuel saving and emissions reduction, including, AMT transmission motors with high torque and compact designs  DCT transmission BLDC motors with high performance and rare earth free designs  Engine cooling fan modules with brushless DC motors  Valve actuators for engine management - 3 classes based on temperature and vibration  Exhaust Gas Reci...

News  Updated at: 2013/04/17