d shall support mechanical opening by releasing the interior (or exterior) handle without the aid of external tools. -          Installation positions and usage instructions: The exterior handle shall be mounted in an area stipulated in the Requirements, or near such an area on the door or door frame. The interior handle shall be mounted in an area unobstructed by any interior component to ensure its clear visibility to the corresponding...

News  Updated at: 2025/09/26

ility and minimal maintenance are important success factors. VinFast is currently using 18 RIVSET EH systems in its production line. Other Böllhoff fastening solutions are implemented into the Lux models. RIVKLE blind rivet nuts, SNAPLOC plug-in connections and FLEXITOL systems can be found in the door frame, in the front end or at the seat belt attachment. RIVKLE blind rivet nuts enable resilient threads on thin-walled components, the two-part ...

News  Updated at: 2021/06/17

mical) announced that its carbon fiber sheet molding compound (SMC) has been adopted for the roof of the all-new GR Yaris launched by Toyota Motor Corporation (Toyota). This is the third round of Toyota vehicles that have used Mitsubishi Chemical’s SMC, following on from its adoption for the rear door frame of the Prius PHV and door and luggage room inner panels of the Lexus LC500 and LC500h. This SMC is a type of intermediate material for carb...

News  Updated at: 2020/11/24

Seoyon E-Hwa's Slovakian subsidiary to supply door frame inner finishers to Jaguar Land Rover A Slovakian subsidiary of Seoyon E-Hwa, Seoyon E-hwa Automotive Slovakia s.r.o., is going to supply door frame inner finishers to Jaguar Land Rover for the five models - electric vehicles and plug-in hybrid vehicles - that are produced at Jaguar Land Rover's plants in Slovakia and the U.K. The term of agreement will begin in June 2020 and end when the p...

News  Updated at: 2018/05/11

Tube Investment India updates about car frame business In an investor conference call, Tube Investment India informed that it has been getting business of the new models of Hyundai for its car frame business.It also started supplying Door Frame to Tata Motors' new models.It is also supplying visional channel, which is not a Door Frame but the channel that divides the window to Maruti, Renault – Nissan and Toyota.As this business is largely Pass...

News  Updated at: 2017/06/21

it is planning a capex of INR 2.8 billion for new plants for Tubing in Punjab and some investments for expansion of the Fine Blanking business.During the last fiscal year, its Engineering division continues to perform well with a growth of 18%. Its Metal Form products registered a growth of 7%.Its Door Frame business grew by 6%, while Automotive Chain business was almost flat because the Two Wheelers over the year did not grow.TI India also obse...

News  Updated at: 2017/06/21

d (SMC) has been adopted for the door and luggage room inner panels of Toyota Motor Corporation's new Lexus LC500 and LC500h. The new Lexus LC500 and LC500h are the second round of Toyota vehicles that use Mitsubishi Chemical's SMC following the first round in which the SMC was adopted for the rear door frame of the new Prius PHV (plug-in hybrid vehicle). (From an article in the Nikkan Jidosha Shimbun on June 16, 2017)...

News  Updated at: 2017/06/16

Mitsubishi Rayon's CFRP material adopted for rear door frame of Prius PHV Mitsubishi Rayon Co., Ltd. announced that its carbon fiber reinforced plastic (CFRP) compound has been adopted for rear door frames used in Toyota's new Prius PHV plug-in hybrid. Lightweight CFRP has high strength was chosen to reduce vehicle weight. Mitsubishi Rayon's carbon fiber sheet molding compound (SMC) is suitable for molding parts with complex shapes. Replacing ste...

News  Updated at: 2017/03/16

Aisin USA to invest USD 99.9 million to expand Indiana operations Aisin USA Manufacturing announced plans to invest more than USD 99.9 million to expand its manufacturing operations in Seymour, Indiana, creating up to 100 jobs by the end of 2018. Aisin USA Manufacturing, which manufactures automotive components and systems, such as door frame components, latching systems, seating and trim molding, plans to begin work on upgrades in late 2016. The...

News  Updated at: 2016/08/23

Aisin Seiki to close door frame production plant in California, U.S.A. Aisin Seiki Co., Ltd. has started to consider closure of Aisin MFG. California, LLC, its door frame manufacturing base in CA, U.S.A. The need has been created to respond to the termination of production as of the end of March 2010 of New United Motor Manufacturing, Inc. (NUMMI), a GM and Toyota joint venture in Fremont, CA., to which Aisin MFG. California supplies 100 percent ...

News  Updated at: 2009/09/05

event manufacturing know-how from outflowing to emerging countries as China. It has begun relocating production items and retooling equipment, sequentially at its noticeably aging production bases in Japan. It will promote reorganization of its Chubu area facilities and transfer by mid-2009 all the door frame production capacities at its No.4 Production Sect., Toyokawa Plant to the main Toyokawa Plant, where its head office is located. (From an a...

News  Updated at: 2008/02/28

event manufacturing know-how from outflowing to emerging countries as China. It has begun relocating production items and retooling equipment, sequentially at its noticeably aging production bases in Japan. It will promote reorganization of its Chubu area facilities and transfer by mid-2009 all the door frame production capacities at its No.4 Production Sect., Toyokawa Plant to the main Toyokawa Plant, where its head office is located. (From an ...

News  Updated at: 2008/02/28

of automobile engine and body parts. The company opened a new R&D center and has consolidated functions for this area of business. Taking this opportunity, it will improve efficiency in developing large products, which have required comparatively long lead time. It will emphasize development of door frame parts, cylinders, crankcases and their peripherals for the present to win business at an early date. The company aims to reinforce its bus...

News  Updated at: 2007/12/07

Shiroki Corporation will increase its production of door components at its No.1 plant in Guangzhou, China, by adding two door frame production lines in the space that turned vacant after production shifts to a new plant, which started operation in June this year as the supplier's second production facility. The two lines will be used exclusively to produce the parts for Nissan's two all-new models scheduled to be produced next year at a joint ven...

News  Updated at: 2007/07/24

Shiroki to expand its door frame parts production in Guangzhou, China Shiroki Corporation will increase its production of door components at its No.1 plant in Guangzhou, China, by adding two door frame production lines in the space that turned vacant after production shifts to a new plant, which started operation in June this year as the supplier’s second production facility. The two lines will be used exclusively to produce the parts for Nissa...

News  Updated at: 2007/07/24

ems of automobile engine and body parts. The company opened a new R&D center and has consolidated functions for this area of business. Taking this opportunity, it will improve efficiency in developing large products, which have required comparatively long lead time. It will emphasize development of door frame parts, cylinders, crankcases and their peripherals for the present to win business at an early date. The company aims to reinforce its busi...

News  Updated at: 2006/12/06

Aisin Seiki to establish new plant in California for production of door frames Aisin Seiki Co., Ltd. announced on October 31 that it will set up two new production facilities in order to meet growing demand for door frames in North America. In the U.S., Aisin Mfg., California, LLC will be established in California; Aisin Canada, Inc. will build its second plant in Canada. The new plants will expand Aisin's door frame production capacity in North ...

News  Updated at: 2006/11/02