Components shown include power transfer unit, compressor, anode recirculation blower, injector, control uits, tank valves, tank manifolds, tank plugs, and pressure control valves
×
Supplier Database
Flexible thermal unit for coolant Advanced Clean Transportation Expo 2025 Bosch (Robert Bosch GmbH)
Flexible thermal units feature a compact design and are preintegrated modules, with the capability to act as a pure coolant or refrigerant module, or a combination of both
Updated fuel cell module system designed for heavy-duty long-haul trucks with a power output of 300 kW; The module has 50% greater output and is 10% smaller than the Company's previous unit, with a reduction in weight of 100 kg; The new module enables weight savings by utilizing a single set of fuel cell components with a double fuel cell stack; System also has a higher degree of system integration; System to launch in 2028
Developed with FirstElement Fuel, the CryoPump refueling stations are designed to enable economical refueling, improving transport capacity, and reducing operating costs by up to 70%; This is enabled through the use of liquid hydrogen and new pump technology based on an electro-hydraulic drive concept with extended stroke length compared to traditional crankshaft-based pumps. This helps minimize boil-off losses.
Fully electrified system improves efficiency through automated gear-shifting capabilities; System combines e-actuator, ECU, software, sensor set, and application-specific components; Compatible with both 12 V and 24 V on-board power supply
Modular system integrating a hairpin electric motor, SiC inverter, ECU, electric actuator, and three-speed transmission; Generates 210 kW continuous power and 26,000 Nm of peak output torque; Can be used across light-, medium-, and heavy-duty truck applications
×
Supplier Database
Electric Power Steering system (EPS) Advanced Clean Transportation Expo 2025 ZF Friedrichshafen AG
Fully electrified system that eliminates hydraulic power steering pump, reducing weight and improving energy efficiency; Architecture serves as foundation for future integration with steer-by-wire systems and advanced autonomous or driver assist operations; Can provide up to 8,000 Nm of output torque
Automated manual transmission for hybrid heavy-duty truck and bus applications; Includes oil-cooled permanent magnet synchronous hairpin electric motor which provides 190 kW and a silicon carbide inverter; Can provide up to 40% CO2 reduction and fuel savings for plug-in hybrid applications; Offers integration with various PTO options for increased functionality
×
Supplier Database
e-comp Scroll air compressor Advanced Clean Transportation Expo 2025 ZF Friedrichshafen AG
Air compressor for medium- and heavy-duty hybrid, battery electric, and fuel cell commercial vehicles; Can compress air up to 12.5 bar; Integrates e-motor, inverter, and liquid cooling system in a compact form factor; Uses innovative scroll technology to minimize noise and vibrations; Provides energy savings by shutting off when compressed air is not required
×
Supplier Database
CeTrax 2 dual electric central drive system Advanced Clean Transportation Expo 2025 ZF Friedrichshafen AG
One-box, compact and lightweight central drive solution for heavy-duty truck applications; System includes two hairpin electric motors, two SiC inverters, an ECU, actuators, and three-speed transmission; Generates 380 kW continuous power and 24,700 Nm of peak output torque; Has smart CAN interface for bi-directional communication
System designed for commercial vehicle applications; Compact design enables easy integration into e-drive systems; High efficiency helps optimize vehicle range; Has voltage range of 500 V to 850 V and maximum power of up to 300 kW
×
Supplier Database
eWorX ePTO Advanced Clean Transportation Expo 2025 ZF Friedrichshafen AG
Standardized, one-box solution which enables a range of uses on electric commercial vehicles, such as hook lifters or skip loaders; eWorX can easily integrate with electric vehicle architectures, with plug-and-work integration; Integrated components include 50 kW e-motor, inverter, and ECU; Has nominal voltage range of 400 V to 750 V
Automatic transmission with torque converter designed for commercial vehicles; Transmission has a wider gear range for improved torque at launch and higher top gear for improved fuel economy; Provides 30% improved acceleration when shifting compared to automatic 6-speed transmissions and offers 10% improved fuel efficiency
×
Supplier Database
DirectPowerPS DC Charger Fleet version Advanced Clean Transportation Expo 2025 Nidec Corporation
Charging station capable of providing up to 360 kW, with dynamic power sharing from 120 kW to 360 kW across each cable; Has 4G, ethernet, and Wi-Fi connectivity options; Fleet version uses air-cooled cable capable of 300 A continuous and 500 A in boost mode, and cable management hook; Emphasizes functionality compared to Flagship version
×
Supplier Database
DirectPowerPS DC Charger Flagship version Advanced Clean Transportation Expo 2025 Nidec Corporation
Charging station capable of providing up to 360 kW, with dynamic power sharing from 120 kW to 360 kW across each cable; Has 4G, ethernet, and Wi-Fi connectivity options; Flagship version offers 32" display for messaging and advertising, cable choices up to liquid-cooled 500 A, and cable retractors, emphasizing ease-of-use and aesthetic appeal for public-facing applications
×
Supplier Database
LFP flat pack battery system Advanced Clean Transportation Expo 2025 BorgWarner Inc.
LFP battery pack developed with FinDreams Battery, BYD's battery manufacturing division, for commercial vehicle applications; Provides 50 kWh or 100 kWh and can be recharged from 10% to 80% in 30 minutes
MarkLines Customer Support
9:00 a.m. - 5:30 p.m. Mon.-Fri. (excluding national holidays)