Cathode material for lithium-ion batteries that does not use highly scarce cobalt. Unlike existing NCM (Nickel-Cobalt-Manganese) materials which incorporate manganese and cobalt, this material is currently under development without using cobalt. Compared to existing materials, it offers high capacity, high voltage, and excellent charge/discharge cycle characteristics, maintaining 89% discharge capacity after 500 cycles. Particle size is customizable according to customer needs. A 20% cost reduction compared to existing materials is potentially achievable.
×
Supplier Database
Current Ripple Detection IC 2025 JSAE Automotive Engineering Exposition Alps Alpine Co., Ltd. (Formerly Alps Electric Co., Ltd.)
The Ges-Gigastampings family is an innovative product line of large-format components that combine multiple body parts into a single unit. These extra-large parts not only reduce weight but also enhances safety. Additionally, Ges-Gigastampings significantly reduce production and assembly times and minimize material usage. The combination of enhanced safety, reduced weight, lower costs, and CO2 reduction in a single product sets new standards and offers manufacturers a cost-efficient solution for the mobility of the future.
×
Supplier Database
METALIT with ring instead of mantle Aachen Colloquium 2024 Emitec Technologies GmbH (Formerly Vitesco Technologies Emitec GmbH)
Electrified powertrain developed for Nissan. Cost reduction by sharing and modularization of main drive components of "3-in-1" for electric vehicles and "5-in-1" for e-Power.
Insulation sheet: A solution currently being developed to support electrification. Acts as a heat insulator and flame shield between cells in lithium-ion batteries. Copper paste: Under development. Used for joining heat sinks and substrates, etc. Because copper has excellent heat resistance, it is expected to be used as an alternative to solder for joining SiC chips, which are hotter than conventional chips. Cost is lower than silver. Heat sink: Utilizes the company's die manufacturing technology and aluminum die casting technology. Reduction in the number of parts for cases integrally molded with hollow piping.
×
Supplier Database
e-UNITY for HEV (under development) (Torque limiter damper with integrated flywheel) 2023 JSAE Automotive Engineering Exposition EXEDY Corporation
7. Vehicle control unit 8. Electronic engine control unit 10. Natural-gas pressure and temperature sensor 11. Natural-gas distributor 16. Natural-gas distributor with high-flow injector 18. High-flow injector 19. Exhaust-gas recirculation metering and mixing module The integration cost of Bosch's hydrogen injection technology for port injection is relatively low, allowing hydrogen-fueled internal combustion engines (ICE) vehicles to quickly enter the market. Its hydrogen direct injection technology product portfolio can effectively support the further reduction of ICE emissions.
×
Supplier Database
Eco-Materials, Magnetic Powder Core Automotive World 2024 Sumitomo Electric Industries, Ltd.
-CO2 emissions can be significantly reduced and horizontal recycling is possible -Contributes to resource (sourcing) risk countermeasures and cost reduction for drive motors
×
Supplier Database
Power lift-gate 2023 JSAE Automotive Engineering Exposition Brose Fahrzeugteile SE & Co. KG, Coburg
Power liftgate for electric hands-free opening and closing with physical switches and radar Characteristics -Springless spindle contributes to weight and cost reduction -Anti-pinch sensor integrated into the side to prevent pinching -Kicking motion in front of the liftgate allows for hands-free access
×
Supplier Database
Wireless battery management system CES 2024 Marelli Corporation (Formerly Calsonic Kansei Corporation)
Wireless distributed battery management system provides 80% reduction in wiring harness weight and cost while also offering flexibility in battery pack design and assembly
×
Supplier Database
Thermal management module CTI symposium 2023 Schaeffler AG (Formerly Vitesco Technologies Group AG)
- Immersion cooling circulates liquid around each battery cell to quickly and evenly reduce the temperature. - Longer battery life and faster charging enable significantly increased range. It is possible to provide smaller and lighter batteries, which also contributes to cost reduction.
×
Supplier Database
ASIC (Application-Specific Integrated Circuit) AUTOMOTIVE WORLD / World Smart Energy Week September 2023 Tokai Rika Co., Ltd.
-The left side of the photo is the previous generation product. It used to have a complicated structure with parts attached to both sides, but the current generation product on the right has been made smaller and thinner. Only one side is used, which also contributes to cost reduction.
×
Supplier Database
Composite Battery Casing JEC World 2023 Valeo Group