- Compact integration of the torque converter and the motor by the company's uniquely devised torque transfer structure. - Even when the power of the battery is running out, the torque converter maintains high driving force.
×
Supplier Database
HPT Transverse HDCT High Performance Hybrid Dual Clutch CTI symposium 2023 Dana Incorporated (Formerly Dana Holding Corporation)
-TE P2P HV Connector: One-pole type HVP800 connector designed for battery power connection. The waterproof rating is IP67 and IP6K9K (with back shell), providing high waterproof and dustproof protection. -HVA HD400: Supports up to 1000VDC and 60A (80°C). Applicable to a wide range of wires (2.5/4.0/6.0 mm²). -IPT-HD power bolt high-voltage connector: Used for motors and E-axles. Applicable to larger wire sizes than conventional IPT. -INLET: Gen2 can charge in 6 hours for 300kWh energy storage (200A 1000VDC Use case 50kW).
×
Supplier Database
P2 Module for front-wheel drive MarkLines Online Expo 2021 Schaeffler AG
Advantages: -Smaller mounting space in axial direction. -Uses a micro torque converter for a controllable launch -Large e-motor installation space -Includes K0 disconnect clutch for P2 architecture
×
Supplier Database
High Voltage Dedicated Hybrid CVT in P2 Architecture 2021 Auto China - Shanghai International Automobile Industry Exhibition Schaeffler Group (China)
High Voltage Wet Triple Clutch P2 Hybrid Module with PEU 2021 Auto China - Shanghai International Automobile Industry Exhibition Schaeffler Group (China)
-Compact and high power density solution. Suitable for P2 hybrid vehicles where installation space is very limited. Approximately 30% shorter than centrally wound stators, but with over 50% higher torque density.
×
Supplier Database
P2 on-axis Module 2021 Auto China - Shanghai International Automobile Industry Exhibition BorgWarner Inc.
-A inverter integrated drive unit that can be installed in 48V mild hybrid configurations P0 to P4. The P0 belt-driven starter generator is available in water-cooled and air-cooled versions to cover wide power range. Vitesco Technologies is also developing a P2 or P3 drive unit that can be integrated into the transmission, as well as a P4 integrated e-axle drive unit with inverter, motor and reducer.
-Electric motors as individual components or parts for complete systems. Product portfolio includes solutions for both hybrid drives (P2) and electric axle drives.
×
Supplier Database
P2 On-Axis Module Hybrid vehicles Delhi Auto Expo 2020 BorgWarner Inc.