The 800V/11kW silicon carbide bidirectional three-in-one on-board charger developed by the Mahle China team according to the ASPICE standard integrates a 3.5kW DC/DC converter and a power distribution unit, adopts an integrated design and a single cooling concept, supports functional safety and network security, and will enter mass production in mid-2025.
The fan draws on the wing structure of the owl, one of the quietest flying birds, to reduce noise by half, cut weight by 10% and improve efficiency by 10%.
×
Supplier Database
Hongqi rollable OLED display Auto Shanghai 2025 FORVIA SE (FORVIA faurecia) (Formerly Faurecia SE)
It is a bumper beam for electric vehicle with different hardening of upper and lower beam with overlap patch in one part which reduces complexity, part number & weld seams. It has different grade material for upper and lower brackets.
×
Supplier Database
Door Inner Panel Bharat Mobility Global Expo 2025 Gestamp Automocion S.A.
Its a light weight door inner panel which is pressed in one piece. It has improved performance for side crash and significant barrier intrusion reduction
It consists of master cylinder, booster and ABS/ESC into one unit. It is an electronic vacuum-less brake apply and modulation system suitable for ICE, Hybrid or BEV vehicles.
×
Supplier Database
EGR Cooler Bharat Mobility Global Expo 2025 Anand Automotive Limited
Exhaust gas recirculation (EGR) coolers offer one way of meeting the strict Euro 6 limits for the emission of nitrogen oxides (NOx). The EGR cooler is made of aluminum and installed close to the engine. Both hot exhaust gases and coolants can flow into the cooler via several connections.
×
Supplier Database
Next-generation digital cockpit demonstration CES 2025 Continental AG
Demonstrator unit highlighting variety of software technologies; Utilizes Company's cockpit software platfrom running on a hypervisor; Features one partition running QNX OS and another on Android Automotive OS; Also features Company's Theming Engine to quickly switch between various visual themes in the cockpit. *Exhibit by Elektrobit
×
Supplier Database
3-in-1 electric drive unit CES 2025 American Axle & Manufacturing Holdings, Inc.
Integral forming by hot stamping has reduced the number of parts from the conventional 10 parts to three. Normally, the lower door ring part in blue is also formed in one step, but the company secured strength by combining separate parts from the front to the rear. The part outlined by the white line uses a patchwork forming technique in which two sheets are stacked on top of each other.
×
Supplier Database
Car body frame integration - Rear frame Automotive World 2025 UNIPRES Corporation
Integral molding by hot stamping reduces the number of parts from 11 to 1. On the rear side, the processing method can be changed and thin sheets can be used for energy absorption. One side is softer and more impact energy absorbent than the other side (red part) by infrared baking technology. On the other, thin sheets are integrally formed using spot welding (5th panel).
×
Supplier Database
Low-profile drive system Automotive World 2025 Mitsuba Corporation
A system that drives autonomous mobile robots and small mobility - A low-profile drive system that coordinates the drive of two thin, lightweight actuators with integrated reducers using one controller. - Available in 3 actuator types with outputs of 50, 100, and 200W, and 2 controller variations. - The 200W output actuator can be selected with or without electromagnetic brake.
Two operation contact switching circuits are built into one switch. Functional safety is achieved by maintaining redundancy and detecting failures in the open/close detection of vehicle doors, hoods, etc.
×
Supplier Database
Joining Technologies Automotive World 2025 H-ONE Co., Ltd.
FDF: Aluminum Joining Technology with Screws High-speed aluminum MIG welding: Achieves a welding speed approximately 4 times faster than the typical welding speed (1 meter per minute) resulting from the development of a unique welding waveform.
MarkLines Customer Support
9:00 a.m. - 5:30 p.m. Mon.-Fri. (excluding national holidays)