Detects current around EV batteries and motors. The accuracy has been improved by using a shunt type instead of the conventional magnetic type. *Presented by Nisshinbo Micro Devices
×
Supplier Database
Soft magnetic composite for axial flux motor 2025 JSAE Automotive Engineering Exposition Sumitomo Electric Industries, Ltd.
Unlike ordinary motor cores, Soft Magnetic Composite (SMC) powder magnetic cores can be molded into 3D shapes. This product has low iron loss and is five times stronger than conventional products.
A magnet made by solidifying magnetic powder with resin. The magnets are highly efficient and strong, in line with the trend towards the miniaturization and higher output of motors.
×
Supplier Database
Film for Adhesive Fixing of Sintered Magnets 2025 JSAE Automotive Engineering Exposition Aichi Steel Corporation
Applicable for adhesive fixing of Nd sintered magnets in IPM motors. Replaces the gap between the core and sintered magnet with a bond magnet. Achieves improved magnetic performance through application and curing treatment. Contributes to the miniaturization of various types of motors.
×
Supplier Database
Bond Magnets:Magfine 2025 JSAE Automotive Engineering Exposition Aichi Steel Corporation
Significantly improved durability. Each magnetic particle is coated, enhancing rust prevention. Durability is improved by 14% compared to existing products. Sustainable material procurement is possible.
×
Supplier Database
Magnetic Angle Sensor 2025 JSAE Automotive Engineering Exposition Alps Alpine Co., Ltd. (Formerly Alps Electric Co., Ltd.)
Dual pneumatic circuit design for current regulatory safety strategy, providing control pressure to EPM-90 in case of an electric failure; also has brake-by-wire capability using an integrated magnetic stroke sensor to deliver signals to the ECU
×
Supplier Database
Safe Consolidation on S32K5 Modular Zone Controller Demo Embedded World 2025 NXP Semiconductors N.V.
This automotive industry's first 16nm FinFET MCU with embedded magnetic RAM (MRAM) will extend the NXP CoreRide platform with pre-integrated zonal and electrification system solutions for scalable software-defined vehicle (SDV) architectures. The MCU's integrated software-defined, hardware-enforced isolation architecture allows carmakers to implement safe and secure partitioning. It ensures safety applications up to ASIL-D can be integrated without compromising performance. The S32K5 will begin sampling with lead customers in Q3/2025.
The Global Brushless Blower (GBB) is a brushless blower motor/module. Smart motor topology enables a compact design which significantly reduces weight and axial length and increases power density. EC technology provides increased lifetime of up to 15,000 hours and outstanding efficiency of up to 80%. With enhanced features including improved EMC (electro-magnetic compatibility) and NVH (noise, vibration, and harshness) performance, the GBB provides an engineered solution for increased climate comfort.
×
Supplier Database
Giant Magnetic Resistance (GMR) sensors CES 2025 Alps Alpine Co., Ltd. (Formerly Alps Electric Co., Ltd.)
Electro-Magnetic Compatibility (EMC) material technologies including radio wave absorption sheets, noise suppression sheets, thermal conduction sheets, ferrite/nanocrystal clamp cores, etc.
MarkLines Customer Support
9:00 a.m. - 5:30 p.m. Mon.-Fri. (excluding national holidays)