- Large transaxle cover - Inverter case with integral cooling channels - Corrosion resistant aluminum inverter case - Motor case - Crankcase cover - Hollow swingarm - Hollow wheel
- Parking gears: Integrated production from forging and heat treatment to machining. - Forged differential case: Integrated structure by forging process.
×
Supplier Database
Roll-formed battery cell case for xEV 2025 JSAE Automotive Engineering Exposition G-TEKT Corporation
Demonstration of the company's four-stage process toward a complete dry brake system, from FBS0 to FBS3, with FBS3 being the case where a complete dry brake system is used on all four wheels. The current development stage is FBS2, which assumes the use of conventional hydraulic brakes at the front and dry drum brakes at the rear. (In the demo, the orange tires represent dry brakes and the light blue represent conventional brakes.) Dry brakes, which use motors and gear units instead of brake fluid, have several advantages over conventional brakes, including less environmental burden, reduced cost and labor for brake fluid replacement, and easier assembly at the factory. In addition, the use of electronics enables finer control, contributing to more efficient driving.
×
Supplier Database
Water jacket 2025 JSAE Automotive Engineering Exposition MAHLE GmbH
-The lid of the inverter case. By replacing the conventional metal material with plastic, the weight has been reduced by approximately 45% (compared to aluminum). It is made of PPS. -Used in Nissan Ariya.
×
Supplier Database
Differential case Plus Auto Shanghai 2025 Georg Fischer AG
Dual pneumatic circuit design for current regulatory safety strategy, providing control pressure to EPM-90 in case of an electric failure; also has brake-by-wire capability using an integrated magnetic stroke sensor to deliver signals to the ECU
×
Supplier Database
Battery frame ring Bharat Mobility Global Expo 2025 Gestamp Automocion S.A.
It controls and assists the vehicle steering and offers an excellent steering feel. The new generation of steering control unit (electro motor and electric control unit) provides additional security in case of failure. It is compliant to ASIL-D enables automated driving. It is ideal for compact vehicles, mid-size vehicle and SUVs.
×
Supplier Database
4x4 transfer case control module CES 2025 Schaeffler AG
Adaptive lighting solution that adapts to the user and the environment; Can adopt a welcome mode as occupants approach; System can also change lighting themes based on personal images uploaded by an occupant to an infotainment system; Lighting on doors also provide notification in case of a nearby object or pedestrian
×
Supplier Database
AI-enabled smart camera solution demonstration unit CES 2025 Pioneer Corporation
Demonstration unit combines dash cameras with connected onboard cameras for a solution that can be used to support fleet management, insurance companies, and the automotive market; In case of an event, dash cams can record and upload footage to the cloud for analysis, along with data about the driver from driver monitoring systems; Generative AI can then be used to quickly create an incident report, while AI analysis can be performed to determine potential causes of on-road incidents
×
Supplier Database
Battery case Automotive World 2025 UNIPRES Corporation
For Nissan Leaf Steel, which is less expensive than aluminum, is used. To cope with lateral impacts, spot welding with a small pitch is used to increase strength.
×
Supplier Database
Plastic battery case (Upper lid) Automotive World 2025 UNIPRES Corporation
-Battery case made from 100% recyclable thermoplastic resin, compliant with EU ELV (end-of-life vehicles) directive. -It is over 30% lighter than iron and results in approximately 50% less CO2 emissions during production than aluminum.
×
Supplier Database
ElroForm TP-ECO International Suppliers Fair (IZB) 2024 ElringKlinger AG
Serves as thermal propagation shielding, both to protect the electrical components inside the battery from metallic venting particles and short circuits, as well as to slow down heat propagation and improve thermal shielding between the inside of the battery case and the environment/Passenger compartment.
×
Supplier Database
The air conditioning system International Suppliers Fair (IZB) 2024 Hyundai WIA Corporation (Formerly WIA Corporation)
The HVAC(Heating, Ventilation, Air Conditioning) module, heat exchanger, and compressor: designed to reduce the volume of air conditioning parts and improve efficiency. In the case of the actual HVAC module, the height was reduced by 30%, and a two-story structure was adopted to improve electricity costs.
×
Supplier Database
Protexx-Shield 7040/7045 The Battery Show North America 2024 Tenneco Inc.
Thin, flexible thermal and flame barrier designed for anti-propagation protection within EV battery packs; comprised of multiple layers of materials including silicone-based coating on silica fabric structure, textile insulation, and optional pressure-sensitive adhesive for direct mounting; Used for EV battery case liners and battery packs
×
Supplier Database
FyreJacket 1650 The Battery Show North America 2024 Tenneco Inc.
Sleeve that is a highly expandable fiberglass structure with engineered silicone coating; provides high temperature and fire protection to mitigate thermal runaway; applications include high-voltage cables, busbars, case liners, and cooling systems
MarkLines Customer Support
9:00 a.m. - 5:30 p.m. Mon.-Fri. (excluding national holidays)