• MUNRO
  • MARKLINES

Teardown Analysis of Ford Mustang Mach-E

Overview

Ford began selling the Mustang EV model, the Mach-E, in the U.S. in December 2020. Munro & Associates, Inc. (Munro) was one of the first to purchase and conduct a teardown study, and created a benchmark report.
Benchmark reports now available for purchase from MarkLines.

 

Analyzed vehicle description

  • Select grade with Co-Pilot 360 Assist 2.0
  • e-AWD with drive motors front and rear
  • 68kWh standard range battery
  • 211 mile (339.6km) range in EPA mode

Teardown video released by Munro & Associates

Prior to the teardown, Munro & Associates released a video, "MACH-E Teardown BEGINS!"

Munro has released a video describing the teardown.
See all videos here ⇒ https://leandesign.com/category/ford-mustang-mach-e/

Data Summary, Prices

  • Full teardown analysis report:　$67,000 USD
    Full report with over 2,000 pages of entire vehicle teardown. Zone-specific reports are also available for purchase, to meet your needs.
  • Zone 1 Body and Chassis:　$24,000 USD
    Active grille shutters / Body / Brake / Closure systems / Electric power steering / Exterior lighting / Exterior trim Suspension / Weatherstrips / Wipers / Wheels & Tires
  • Zone 2 Controlling Electronics:　USD 28,500
    12V Battery / Active chassis & ADAS / Data and power output / Horn / Ignition system, Remote key entry, TPMS / Infotainment / Interior controls / Interior switches / Low voltage harness / Overhead console & lighting / Room mirror
  • Zone 3 Interiors and Safety:　USD 22,500
    Carpet & NVH / Floor console / Headliner & visor / HVAC / Instrument panel / Interior trim / Seats / Seat belts / Airbags
  • Zone 4 Powertrain and Battery Pack:　USD 33,750
    Battery management & charging / Battery pack / Cooling pack & lines / Gearbox / Half shaft / High voltage cables / Inverters & converters Motor

Each Zone1-4 report contains the following features.

  • Vehicle and Zone Executive Summaries
  • Zone Eye-Catching Features / Technical descriptions
  • Zone Quick Cost Estimate Report / Cost analysis by component
  • Zone Quick-Costed Bill of Material (CBOM)

The contents of each feature are described below.

 

Zone Eye-Catching Features / Technical descriptions

Based on observations of each of the vehicle parts, the report explains points of interest and issues from the perspectives of cost, weight, and performance.

 

Zone Quick Cost Estimate Report / Cost analysis by component

All disassembled parts are analyzed using Munro Quick Cost Estimating (QCE), Munro's proprietary cost analysis system.

 

Zone Quick-Costed Bill of Material (CBOM)

A bill of materials summarizing the cost, material, and weight of the component parts.

 

Ford Mustang Mach-E Option Reports

In addition to the full benchmark report and Zone reports, the following reports of interest are available for purchase.

 

Zone E: High/Low Voltage Electronics Selections from Zones 1 through 4 , Electrical Topology and Communication Architecture: $45,000 USD

  This report extracts the high voltage and low voltage components and wiring from Zones 1-4.

  It includes network communications system diagrams showing all serial buses (CAN, LIN, Ethernet, etc.), the communication circuits of the main ECUs and the important microprocessors and SoCs.

 

Thermal System Details: $15,000 USD

This report details the thermal management system and components of the cabin and powertrain.

 

Thermal System Cost Analysis: $3,500 USD

A report summarizing system components’materials, costs, and weights.

LEGAL DISCLAIMERS & SALES CONDITION (FAQ reference Terms and Conditions)

Q1: Can I see a sample report before purchasing?
A1: Please contact a MarkLines representative, so that MarkLines may provide you with sample information in digital PDF format, or to answer any other questions that you may have regarding the report.
(Note: critical data will be hidden in the sample.)

Q2: After purchasing this report, am I authorized to photograph, distribute, copy, or fax all or portions of the reports?
A2: It is permissible to distribute copies of this report only internally within your company.
If you intend to distribute the information outside of your company’s organization by hard copy or fax, please contact MarkLines before doing so. MarkLines will then negotiate with Munro & Associates, Inc. to receive their written permission on your behalf as these reports are protected by law.
Distribution without express written permission is legally prohibited.

 

For further details including content and costs, please contact:

MarkLines Co., Ltd.
Consulting Services Department
Contact: Mr. Fushimi and Mr. Usuba
TEL：(03) 4241-3906
FAX：(03) 4241-3900
e-mail：benchmark@marklines.com