List of suppliers

Search Results 402results

Supplier Name Address Major Parts Suppliers Reports Country
ADVICS Co., Ltd. 2-1, Showa-cho, Kariya-shi, Aichi-ken, 448-8688, Japan Major Parts Suppliers image
Aisin Seiki Co., Ltd. 2-1 Asahi-machi, Kariya, Aichi 448-8650, Japan Major Parts Suppliers image
Akebono Brake Industry Co., Ltd. 19-5 Nihonbashi Koami-cho, Chuo-ku, Tokyo 103-8534, Japan Major Parts Suppliers image
Anand Automotive Limited 1 Sri Aurobindo Marg, Hauz Khas, New Delhi – 110016, India Major Parts Suppliers image
PT. Astra Otoparts Tbk Jl. Raya Pegangsaan Dua Km. 2,2, Kelapa Gading - Jakarta 14250, Indonesia Major Parts Suppliers image
Apr 23, 2019

On April 16, Continental announced that it has conducted tests of the CO2 savings potential of the MK C1 electrohydraulic brake system in a plug-in hybrid. TÜV confirms in a certified test: MK C1 reduces the amount of CO2 emitted in the WLTP by around 5 g/km on average compared with a conventional hydraulic hybrid brake system. At the end of 2020, It will begin production of the MK C1 in Shanghai for a Chinese customer.
The brake pedal in the MK C1 is usually completely decoupled from pressure generation. Therefore the driver always has a uniform pedal feel. The full use can be made of recuperation phases – saving CO2 as a result
The measurements were taken on a dynamometer test in accordance with the WLTP (Worldwide harmonized Light vehicle Test Procedure), the globally valid measurement procedure for determining the exhaust emissions and fuel/electricity consumption of motor vehicles, and were supervised by the TÜV experts present.

Continental press release

Apr 21, 2019

South Korea-based Sangsin Brake Co., Ltd.’s US subsidiary, Sangsin Technology America, is going to start mass production at its plant in McDonough, Georgia, in May 2019. The capital investment in this project is going to be USD 20 million. The major clients of the plant in Atlanta are Hyundai and Kia’s plants in the U.S., and the company intends to expand the client base to include other automotive brands as well. Sangsin Brake has already begun the full-fledged production of brake pads and other products at a plant in Coahuila, Mexico, and is planning to expand its production capacity to 1.5 million units, investing USD 70 billion. Also, it has signed a contract with TBK Co., Ltd., a Japanese manufacturer, on the supply of the technology worth JPY 10 million and the joint development activities. (From some releases on April 21, 2019)

Apr 18, 2019

On April 17, Lincoln unveiled the all-new Corsair two-row SUV at the 2019 New York International Auto Show.
The Corsair will be built alongside the Ford Escape at Louisville Assembly Plant in Louisville, Kentucky, arriving in dealerships in fall 2019.
A 2.0-liter turbocharged engine that produces 250 hp and 275 lb-ft of torque is standard, while a 2.3-liter turbocharged engine that produces 280 hp and 310 lb-ft of torque is optional, both mated to a new 8-speed automatic transmission and available with Lincoln’s intelligent all-wheel-drive system is available with both engines.
The 2020 Corsair features technologies such as Phone-As-A-Key, Head-Up Display and standard Lincoln Co-Pilot360 driver-assist features that include pre-collision assist with automatic emergency braking and pedestrian detection, blind spot information system, a lane-keeping system, rear backup camera and auto high-beam lighting.
An available upgrade, Lincoln Co-Pilot360 Plus, adds adaptive cruise control with traffic jam assist, lane centering technology, speed sign recognition, evasive steer assist, reverse brake assist, and active park assist plus.

(Lincoln press releases on April 17, 2019)  1 / 2