1. MarkLines HOME
  2. UN Regulations

UN Regulations

Trends on Harmonization of Vehicle Standards at UN
EU/ECE Regulations Adoption Status
Conference Schedule
Provided by: JASIC

Amended Regulations in the past:

Year of 2013 : Jan.  Feb. Mar. Apr.  May
Year of 2012 : Jan.  Feb. Mar. Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2011 : Jan.  Feb. Mar. Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2010 : Jan.  Feb.  Mar.  Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2009 : Jan.  Feb.  Mar.  Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2008 : Jan.  Feb.  Mar.  Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2007 : Jan.  Feb.  Mar.  Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2006 : Jan.  Feb.  Mar.  Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2005 : Jan.  Feb.  Mar.  Apr.  May  Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
Year of 2004 : Jun.  Jul.  Aug.  Sep.  Oct.  Nov.  Dec. 
How to access to Working Documents of UN regulations

Table of amended regulations (May 2013).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN/ECE
regulation		 4 00 S16 2012/63 2012/11/14 　 Rear registration plate lamps -The new regulation regarding LED light sources may be applied for replaceable LED light sources.
-Error correction in a figure illustrating a case of marking. 
2 Agreement
regarding
UN/ECE
regulation		 6 R5 C1

2012
/110+2012
/110
/Corr.1

 2013/2/13 2012/11/14 Direction indicators Error correction.
3 Agreement
regarding
UN/ECE
regulation		 13H 00 S14 2012/47 2013/2/14 2013/1/27 Braking (M1) Clarification of the requirements for static braking force of the electronically controlled braking system (EBS). 
4 Agreement
regarding
UN/ECE
regulation		 30 02 S17 2012/48 2013/2/14 2013/1/27 Pneumatic tyres (passenger vehicle) -Definition of the new tyre categories introduced according to the revision of R117 shall be added.
-Exemption of "temporary use spare tyres"from regulatory marking requirements.
-With regard to the judgment procedure after the speed performance test description shall be modified.
5 Adopted
proposal
regarding
UN/ECE
regulation		 31 02 S8 2012/69 2012/11/14 　 Halogen sealed beam headlamps Clarification of conditions for types being identical with each other. 
6 Agreement
regarding
UN/ECE
regulation		 44 04 S5 2012/44 2013/2/14 2013/1/27 Child restraint systems -The caution label for Child Restraint System shall be revised for adjustment with the revision regarding label in R94.
-Addition of a marking for the rearward fazing plus tether ISOFIX anchorage.
-Clarification of the location of the main load-bearing contact point.
-Addition of an article prescribing  production qualification tests.
-The customer shall be advised not to use the rearward facing child restraint systems in seating positions where an active frontal airbag is installed. This information shall be clearly visible at the point of sale without removing the packaging.
7 Adopted
proposal
regarding
UN/ECE
regulation		 46 04 　 2012/87 2012/11/14 　 Rear-view mirrors Addition of a new mirror to large vehicles.
8 Agreement
regarding
UN/ECE
regulation		 03 S1 2012/22 2012/12/6 2012/11/18 Adjustment with the rules for exterior projections.
9 Agreement
regarding
UN/ECE
regulation		 48 04 S7/C1 　 2013/2/13 2012/11/14 Installation of lights Error correction.
04 S9 2012/10 2012/12/6 2012/11/18 Fitting requirements for maneuvering lamp shall be added.
05 S2 2012/37 2012/12/6 2012/11/18 Requirements for DRL shall be mitigated. 
06 　 2012/11 2012/12/6 2012/11/18 Enhancement as well as clarification of function requirements regarding exterior courtesy lamps.
10 Adopted
proposal
regarding
UN/ECE
regulation		 04
05
06		 S10
S3
S1		 2012/73 2012/11/14 　 -A part of sentences shall be deleted for transfer of LED module requirements to R112.
-Addition of definition of ”Fixed (open) position of a movable component".
-Correction of mounting requirements for retro-reflectors.
-Deletion of a part of sentences for adjustment with R121 regarding tell-tale requirements for direction indicators.
-Addition of definition of a goniometer.
-Clarification that voltage control circuit may be located within the headlamp body.
2012/73
/Corr.1		 2012/11/14 　 Error correction.
05
06		 S3
S1		 2012/74 2012/11/14 　 Revision of rules for the angle of reference axis regarding the geometric visibility of any back-up lamp. 
11 Adopted
proposal
regarding
UN/ECE
regulation		 50 00 S16 2012/75 2012/11/14 　 Lights (moped, motor cycle) -The new regulation regarding LED light sources may be applied for replaceable LED light sources.
-The inward visibility angle of a pair of front position lamps shall be mitigated to 20°
12 Adopted
proposal
regarding
UN/ECE
regulation		 53 01 S14 2012/76 2012/11/14 　 Installation of lights (motor cycle) -The inward visibility angle of a pair of front position lamps shall be mitigated to 20°.
-The lamp approved according to R113 may be added as a part of the light source unit to passing beam on certain conditions.
13 Adopted
proposal
regarding
UN/ECE
regulation		 61 00 S2 2012/89 2012/11/14 　 External projections (commercial vehicle) The Annex defining the extent of the trichromatic coordinates shall be deleted.
14 Agreement
regarding
UN/ECE
regulation		 64 02 S2 2012/50 2013/2/14 2013/1/27 Temporary spare tyres -Addition of temporary use spare tyres prescribed in R54 to the tyre unit.
-For a type 4 temporary-use spare tyre unit the maximum speed warning symbol may be chosen from two alternatives.
15 Adopted
proposal
regarding
UN/ECE
regulation		 77 00 S15 2012/77 2012/11/14 　 Parking lamps The new regulation regarding LED light sources may be applied for replaceable LED light sources.
16 Agreement
regarding
UN/ECE
regulation		 77 00 S14 2010/100 2013/1/25 2011/6/23 Parking lamps The Annex defining the extent of the trichromatic coordinates shall be deleted. 
17 Adopted
proposal
regarding
UN/ECE
regulation		 85 00 S6 2012/106 2012/11/14 　 Measurement of engine power An article prescribing requirements for dual fuel engines shall be added.
18 Adopted
proposal
regarding
UN/ECE
regulation		 87 00 S16 2012/78 2012/11/14 　 Daytime running lamps -The limitation of trade mark within the lens surface shall  be removed in adjustment with other regulations.
-The new regulation regarding LED light sources may be applied for replaceable LED light sources.
19 Agreement
regarding
UN/ECE
regulation		 98 R3 C1 2012/61 2013/2/13 2012/11/14 Gas-discharge headlamps Error correction.
20 Adopted
proposal
regarding
UN/ECE
regulation		 100 01 S2 2012/101 2012/11/14 　 Electric power train The definition of passenger compartment for the sake of electric safety assessment shall be corrected. 
02 　 2012/102 2012/11/14 　 Requirements for a Rechargeable Energy Storage System (REESS) shall be added.
2012/102
/Corr.1		 2012/11/14 　 Error correction.
21 Adopted
proposal
regarding
UN/ECE
regulation		 112 01 S4 2012/82 2012/11/14 　 Headlamps (with an asymmetrical passing beam) -Clarification of conditions for types being identical with each other.
-Adjustment regarding the minimum size of approval mark.
-In case a LED headlamp is applied for approval as a LED module, an ID code for LED module may not be marked.
-Revision regarding the points for judging the stability of photometric performance of LED Modules.
-Addition of requirements regarding plastic lens surface to the requirements for testing mechanical deterioration.
-A voltage control gear may be located within the headlamp body within the limits as defined in R48. However, it shall remain removed during the test for approval. It shall clearly be shown that the electronic light source control gear, which is referred to in the requirements for using LED, is identical with the one used for operating the LED module.
22 Agreement
regarding
UN/ECE
regulation		 127 00 　 2010
/127+2011
/51		 2013/1/7 2012/11/17 Pedestrian safety A new UN regulation for pedestrian protection.
23 Agreement
regarding
UN/ECE
regulation		 128 00 　 2010
/44+2010
/44
/corr.1+2010
/110		 2013/1/8 2012/11/17 Led A new UN regulation regarding LED bulbs.


Table of amended regulations (Apr. 2013).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement regarding UN/ECE regulation 14 07 S3 2011/116 2012/11/27 2012/7/26 Safety belt anchorages Strength and equipment requirements shall be included according to additional application of side-facing seat for vehicles of M3 category.
2 Adopted proposal regarding UN/ECE regulation 07 S4 2012/97 2012/11/14 -To the description about the definition of anchorage angle explanation shall be added regarding its understanding in case vehicles are equipped with seat slide mechanism.
-The term "adjusting device" shall be replaced with "adjusting system" regarding the safety belt anchorage location for front seat of M1 category and rear seat as well as special front and rear seats of categories other than M1.
-To the definition of safety belt anchorage requirements for adjustable anchorage in M2 and M3 vehicles shall be added.
3 2012/42 2012/11/14 -According to adoption of the new CRS regulation i-size child restraint system shall be added to the child restraint systems, and requirements for its strength and installation shall also be prescribed.
4 Agreement regarding UN/ECE regulation 19 04 S3 2012/7 2012/12/6 2012/11/18 Front fog lamps -Input voltage for Class F3 equipped with LED module(s) shall be changed, on the basis of which the statement in the communication form shall be changed.
-Correction of allowable extent of a re-aim of the cut-off position for the Class F3.
-Clear description of light sources to be used for the Class F3.
5 Agreement regarding UN/ECE regulation 23 00 S18 2012/8 2012/12/6 2012/11/18 Reversing and manoeuvring lamps Maneuvering lamp shall be added.
6 Adopted proposal regarding UN/ECE regulation 00 S19 2012/68 2012/11/14 -Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources.
-Adjustment regarding the minimum size of approval mark. Correction of alphabets "AR" in the marking example as they were incorrectly shaped.
7 Agreement regarding UN/ECE regulation 43 01 S1 2012/21 2012/12/6 2012/11/18 Uniform provisions concerning the approval of safety glazing materials An amendment to replace "glazing" with "panes".
8 Agreement regarding UN/ECE regulation 58 02 S2 2012/23 2012/12/6 2012/11/18 Rear underrun protection Clarification of tentative rules for the provisional period.
9 Agreement regarding UN/ECE regulation 70 01 S8 2012/13 2012/11/28 Rear marking plates for heavy and long vehicles -Clarification of application extent.
-Clarification regarding the nozzle to be used for the rainfall test.
10 Agreement regarding UN/ECE regulation 105 05 S1 2012/24 2012/12/6 2012/11/18 The carriage of dangerous goods with regard to their specific constructional features The number of reference standard shall be changed.
11 Agreement regarding UN/ECE regulation 107 04 S2 2012/25 2012/12/6 2012/11/18 Category M2 or M3 vehicles with regard to their general construction -When using a gauging device in the gangway, the device may come into contact with any monitor or display device mounted
from the ceiling above the gangway on certain conditions.
-Mitigation of requirements for the width of the seat.
12 Agreement regarding UN/ECE regulation 118 02 2011/111 2012/12/4 2012/7/26 The burning behaviour of materials used in the construction of certain categories of motor vehicles The application extent of the burning test of materials used in the compartment shall be widened.
13 Agreement regarding UN/ECE regulation 119 01 S1 2012/18 2012/12/6 2012/11/18 Cornering lamps -Error correction.
-Clarification of detailed conditions about light source for measurement of colorimetric characteristics.
14 Adopted proposal regarding UN/ECE regulation 01 S2 2012/84 2012/11/14 -Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources.
-Clarification of luminous intensity requirements.
15 Adopted proposal regarding UN/ECE regulation 123 01 S4 2012/85 2012/11/14 AFS

-Change of definition of the type of lamps.
-Adjustment regarding the minimum size of approval mark.
-Revision regarding points of judgment of the stability of photometric performance of LED Modules.
-According to addition of the definition of goniometer to R48, its definition shall be deleted from R123.
16 Agreement regarding UN/ECE regulation 01 S3 2012/19 2012/12/6 2012/11/18 -Usage of non replaceable LED modules shall be admitted.
-Requirements for mounting device of LED module shall be prescribed.
-Correction of the light intensity criteria for passing beam headlamp.
17 Agreement regarding UN/ECE regulation RE3 R02 A2 2012/12/24 Consolidated resolution on the construction of vehicles

-Definition of manufacturer shall be added.


Table of amended regulations (Mar. 2013).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN/ECE
regulation		 7 02 S20 2011/95 2012/11/22 2012/7/26 Front and rear position(side)lamps, stop lamps and end-outline marker lamps Clarification of description with regard to the geometric visibility requirements in case of an interdependent lamp system.
2 Adopted
proposal
regarding
UN/ECE
regulation		 02 S21 2012/65 2012/11/14 -Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources.
-Correction of approval marking.
3 Agreement
regarding
UN/ECE
regulation		 12 04 S1 2011/115 2012/10/10 2012/7/26 Steering mechanism -Correction of the definition of "exposed conductive part" for vehicles powered by an electric engine.
-Clarification regarding the abbreviation for "Rechargeable energy storage system".
4 Adopted
proposal
regarding
UN/ECE
regulation		 04 S2 2012/96 2012/11/14 The definition of passenger compartment for the sake of electric safety evaluation shall be corrected.
5 Adopted
proposal
regarding
UN/ECE
regulation		 44 04 S6 2012/98 2012/11/14 Child restraint systems Revision regarding the ISOFIX locking mechanism.
6 Adopted
proposal
regarding
UN/ECE
regulation		 45 01 S7 2012/72 2012/11/14 Headlamp cleaners Harmonization with regard to the minimum size of approval mark.
7 Agreement
regarding
UN/ECE
regulation		 46 03 2011/106 2012/10/3 2012/7/26 Rear-view mirrors Correction of provisions regarding camera effect requirements for mirrors of Class V and Class VI.
8 Adopted
proposal
regarding
UN/ECE
regulation		 91 00 S14 2012/79 2012/11/14 Side-marker lamps Ｔhe new regulation regarding LED light sources may be applied for replaceable LED light sources.
9 Adopted
proposal
regarding
UN/ECE
regulation		 94 02 S3 2012/99 2012/11/14 Protection of the occupants in the event of a frontal collision -Correction of the definition of "exposed conductive part" for vehicles powered by an electric engine.
-Clarification regarding the abbreviation for "Rechargeable energy storage system".
10 Adopted
proposal
regarding
UN/ECE
regulation		 95 03 S2 2012/100 2012/11/14 Protection of the occupants in the event of a lateral collision -Correction of the definition of "exposed conductive part" for vehicles powered by an electric engine.
-Clarification regarding the abbreviation for "Rechargeable energy storage system".
11 Adopted
proposal
regarding
UN/ECE
regulation		 98 01 S4 2012/80 2012/11/14 Gas-discharge headlamps -Revision of definition regarding types of headlamps.
-Harmonization with regard to the minimum size of approval mark.
-Revision regarding points of judgment of the stability of the photometric performance of LED Modules.
-Correction of requirements for testing mechanical deterioration of plastic lens surface.
R3 C1 2012/61 2012/11/14 Error correction.
12 Agreement
regarding
UN/ECE
regulation		 01 S3 2012/15 2012/12/6 2012/11/18 -UV radiation test shall not be applied to LED modules of low-UV type.
-Correction of test voltage for measuring the intensity of light emitted.　
-Correction of the judgment criteria at test regarding the change of the vertical position of the "cut off" line under the heat influence.
13 Adopted
proposal
regarding
UN/ECE
regulation		 116 00 S4 2012/93 2012/11/14 Protection against unauthorized use Change of the series number of R10 which is referred to.

PAGETOP

Table of amended regulations (Feb. 2013).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN/ECE
regulation		 3 02 S13 2012/62 2012/11/14   Reflex reflectors Adjustment of marking requirements among regulations.
2 Adopted
proposal
regarding
UN/ECE
regulation		 6 01 S23 2012/64 2012/11/14   Direction indicators Reproduction of a text for introduction into new provisions covering the use of LED light sources.
R5 C1 2012/110 2012/11/14   Error correction.
2012/110/Corri.1 2012/11/14   Error correction.
3 Adopted
proposal
regarding
UN/ECE
regulation		 10 04 S2 2012/66 2012/11/14   Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility Correction of tentative rules for the provisional period.
4 Adopted
proposal
regarding
UN/ECE
regulation		 19 04 S4 2012/67 2012/11/14   Front fog lamps -Change of definition of the type of lamps.
-Judgment of conformity shall be corrected in consideration of practical usage.
5 Adopted
proposal
regarding
UN/ECE
regulation		 26 03 S2 2012/86 2012/11/14   External projections -The requirement to round edges by 2.5mm shall not be applied to front nor rear bumpers.
-Addition of definition of "Revision" and "Extension".
6 Adopted
proposal
regarding
UN/ECE
regulation		 38 00 S16 2012/71 2012/11/14   Rear fog lamps Reproduction of a text for introduction into new provisions covering the use of LED light sources.
7 Adopted
proposal
regarding
UN/ECE
regulation		 58 02 S3 2012/88 2012/11/14   Rear underrun protection Clarification of the rule regarding the with of RUPD.
8 Agreement
regarding
UN/ECE
regulation		 59 01   2011/65 2012/11/14 2012/4/13 Replacement silencing system Adjustment with R51 according to its revision.
9 Agreement
regarding
UN/ECE
regulation		 80 03   2011/119 2012/10/22 2012/7/26 Seat
(large passenger vehicle)		 Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.

PAGETOP

Table of amended regulations (Jan. 2013).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN/ECE
regulation		 6 01 S22 2011/128 2012/8/15 2012/7/26 Direction indicators Amendment to delete those items which have unduly been remaining after the revision of intensity of the light emitted.
2 Agreement
regarding
UN/ECE
regulation		 10 R4 Erratum 　 2012/6/6 - Uniform provisions concerning the approval of vehicles with regard to electromagnetic compatibility Error correction.
3 04 S1 2011/129 2012/8/15 2012/7/26 The ISO regulation to be referred to shall be changed.
4 Agreement
regarding
UN/ECE
regulation		 17 08 S1 2011/118 2012/8/15 2012/7/26 Seats -Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
-Clear description of requirement that the seat with integrated head restraint shall be padded at the head restraint area.
5 Agreement
regarding
UN/ECE
regulation		 19 03 S3 2011/130 2012/8/15 2012/7/26 Front fog lamps Amendment regarding the photometric requirements for Class F3 front fog lamp.
6 04 S2 2011/96
+2011/150		 2012/8/15 2012/7/26 -Addition of rules for gas-discharge light sources with integrated ballast regarding the gas-discharge light source allowed for Class F3 front fog lamp.
-Correction of transitional rules.
7 Agreement
regarding
UN/ECE
regulation		 22 05 S2 2011/139 2012/8/15 2012/7/26 Motor cycles helmets The symbol mark shall be changed..
8 Agreement
regarding
UN/ECE
regulation		 48 04 S8

201/98
+2011/151
+2011/131

 2012/8/15 2012/7/26 Installation of lights -Mitigation of requirement for the mounting height of rear fog lamp.
-Correction of the definition of ballast.
-Clarification of the application extent of requirements with regard to replacing a light source.
-Compliance with the requirements of the 03 and subsequent series of amendments to Regulation No. 19.
-Clarification of value requirements for objective luminous flux of a light source as well as an LED module.
-Addition of requirements for the case DRL and position lamp are simultaneously activated
-Correction of transitional rules.
9 Agreement
regarding
UN/ECE
regulation		 51 02 S8 2011/63 2012/5/23 2012/4/13 Noise Addition of description on test methods for ASEP (The additional sound emission provisions)
10 Agreement
regarding
UN/ECE
regulation		 107 04 S1 2011/109 2012/8/15 2012/7/26 Category m2 or m3 vehicles with regard to their general construction Reciprocal reference with R66 shall be abolished.
11 Agreement
regarding
UN/ECE
regulation		 112 01 S2 2011/102 2012/8/15 2012/7/26 Headlamps (with an asymmetrical passing beam) Clarification of the definition of LED module.

PAGETOP

Table of amended regulations (Dec. 2012).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN/ECE
regulation		 43 01 2011/35 2012/8/29 2011/10/28 Uniform provisions concerning the approval of safety glazing materials Consideration of gtr6 in ECE43.
2 Agreement
regarding
UN/ECE
regulation		 123 01 S1/C1 - 2012/10/11 2011/10/28 AFS Error correction.

PAGETOP

Table of amended regulations (Nov. 2012).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN/ECE
regulation		 11 03 S3 2012/41 2012/6/26   Door latches & hinges -Clarification of the scope.
-Clarification of the definition of back door.
2 Adopted
proposal
regarding
UN/ECE
regulation		 13-H 00 S14 2012/47 2012/6/26   Braking (M1) Clarification of the requirements for static braking force of the electronically controled braking system (EBS). 
3 Adopted
proposal
regarding
UN/ECE
regulation		 30 02 S17 2012/48 2012/6/26   Pneumatic tyres (passenger vehicle) -Addition of the definition of the new tyre category introduced according to the revision of R117.
-Exemption of "temporary use spare tyres"from regulatory marking requirement.
-With regard to the judgment procedure after the speed performance test description shall be modified.
4 Agreement
regarding
UN/ECE
regulation		 37 03 S37 2011/10 2012/7/3 2011/10/28 Filament lamps -In addition to the reference luminous flux at 13.2V a reference luminous flux 1650lm at 12.2V shall be included in the H9 data sheet.
-9 bulbs shall be transferred from Group 2 to Group 3.
R6 C1 2012/29
+2012/29/Corr.1		 2012/3/14 Error correction.
5 Adopted
proposal
regarding
UN/ECE
regulation		 44 04 S5 2012/44 2012/6/26   Child restraint systems -The caution label for Child Restraint System shall be revised for adjustment with the revision regarding label in R94.
-Addition of a marking for the rearward fasing plus tether ISOFIX anchorage.
-Clarification of the location of the main load-bearing contact point.
-Addition of an article prescribing  production qualification tests.
-The customer shall be advised not to use the rearward facing child restraint systems in seating positions where an active frontal airbag is installed. This information shall be clearly visible at the point of sale without removing the packaging.
6 Adopted
proposal
regarding
UN/ECE
regulation		 54 00 S18 2012/49 2012/6/26   Pneumatic tyres(commercial vehicle) -Addition of definition of the new tyre categories introduced according to the revision of R117.
-Addition of marking requirements needed for the new tyre categories.
7 Agreement
regarding 
UN/ECE
regulation		 58 R2 A1/C1   2012/10/3 2012/7/26 Rear underrun protection Error correction.
8 Adopted
proposal
regarding
UN/ECE
regulation		 64 02 S2 2012/50 2012/6/26   Temporary spare tyres -Addition of a temporary use spare tyre unit prescribed in R54.
-For a type 4 temporary-use spare tyre unit the maximum speed warning symbol may be chosen from two alternatives.
9 Agreement
regarding 
UN/ECE
regulation		 94 01 S4/C1   2012/9/10 2012/7/26 Protection of the occupants in the event of a frontal collision Error correction.
10 Adopted
proposal
regarding
UN/ECE
regulation		 101 01 S1 2012/46 2012/6/26   Emission of carbon dioxide and fuel consumption (passenger car) Adjustment with the US regulation.

PAGETOP

Table of amended regulations (Oct. 2012).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement regarding UN/ECE regulation 41 04 　 2011/62 2012/8/14 2012/4/13 Noise (motor cycle) Addition of description on test methods for noise emissions during acceleration and those related to ASEP.
2 Agreement regarding UN/ECE regulation 48 05 S1 2011/132 2012/8/15 2012/7/26 Installation of lights

-Addition of requirements for the case DRL and position lamp are simultaneously activated.
-Correction of transitional rules.
3 Agreement regarding UN/ECE regulation 49 05 S5 2011/124 2012/8/15 2012/7/26 Diesel emission

-Correction of words for adjusting EC regulation with EURO VI.
-Reference standard shall be updated.
4 Agreement regarding UN/ECE regulation 58 02 S1 2011/107 2012/8/15 2012/7/26 Rear underrun protection Increase of categories the regulation shall be applied for. 
5 Agreement regarding UN/ECE regulation 94 01 S4 2011/120 2012/8/15 2012/7/26 Protection of the occupants in the event of a frontal collision The caution label for airbag shall be changed.
02 S2 2011/121 2012/8/15 2012/7/26 Revision of the definition of exposed conductive part regarding electric vehicles.
6 Agreement regarding UN/ECE regulation 95 03 S1 2011/122 2012/8/15 2012/7/26 Protection of the occupants in the event of a lateral collision The definition of "exposed conductive part" for protection of occupants from direct contact with electrically energized parts of a system using high voltage current shall be amended.
7 Agreement regarding UN/ECE regulation 98 01 S2 2011/100 2012/8/15 2012/7/26 Gas-discharge headlamps Revision of requirements for lamp for the light source with integrated ballast. 
8 Agreement regarding UN/ECE regulation 99 00 S7 2011/101 2012/8/15 2012/7/26 Gas-discharge light sources Introduction of a new gas-discharge light source of 25W.
9 Agreement regarding UN/ECE regulation 100 01 S1 2011/123 2012/8/15 2012/7/26 Electric power train Revision of the definition of exposed conductive part regarding electric vehicles..
10 Agreement regarding UN/ECE regulation 104 00 S7 2011/133 2012/8/15 2012/7/26 Retro-reflective markings for heavy and long vehicles Error correction with regard to the coefficient of retro-reflection for Class C.
11 Agreement regarding UN/ECE regulation 107 05 　 2011/110+corr.1 2012/8/15 2012/7/26 Category m2 or m3 vehicles with regard to their general construction -Alarm system against fire inside the vehicle shall be introduced. 
12 Agreement regarding UN/ECE regulation 113 00 S10 2011/103 2012/8/15 XX Headlamps (with a symmetrical passing beam) The provisions regarding lamp bodies shall be rearranged in consideration of introducing gas-discharge light sources with integrated ballast.
13 Agreement regarding UN/ECE regulation 121 00 S6 2011/112 2012/8/15 2012/7/26 The location and identification of hand controls,tell-tales and indicators -Adjustment of terms regarding headlamp with R48.
-Clarification of the definition of tell-tale.
14 Agreement regarding UN/ECE regulation 122 00 S3 2011/113 2012/8/15 2012/7/26 Heating system Safety requirements for LPG combustion heaters and LPG heating systems.
15 Agreement regarding UN/ECE regulation 123 01 S2 2010/105 2012/8/15 2012/7/26 AFS Revision of requirements for lamp for the light source with integrated ballast.

PAGETOP

Table of amended regulations (Sep. 2012).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement regarding UN/ECE regulation 13 11 S8 2011/58 2012/5/23 2012/4/13 Braking Vehicles with 4 axles, with a maximum mass not exceeding 25 t and a maximum wheel diameter code not exceeding 19.5 in. shall be equipped with vehicle stability function.
2 Agreement regarding UN/ECE regulation 13H 00 S13 2011/59 2012/5/23 2012/4/13 Braking (M1) -Clarification of the method to confirm the correct operational status of electronic systems at a periodic technical
inspection.
-"The ESC malfunction tell-tale in a flashing mode" may be used to indicate ESC intervention and/or the intervention of ESC- related systems
3 Agreement regarding UN/ECE regulation 14 07 S2 2011/54 2012/5/23 2012/4/13 Safety belt anchorages -Requirements for marking of the ISOFIX top tether anchorages shall be clarified.
-Addition of a rule to exempt vehicles with a high engine power from fitting obligation of ISOFIX anchorages.
4 Agreement regarding UN/ECE regulation 55 01 S3 2011/60 2012/5/23 2012/4/13 Mechanical coupling The design of the drawbar including the coupling head for use on small trailers shall be such as to prevent the coupling head from digging into the ground in the event of separation from the main coupling.
5 Agreement regarding UN/ECE regulation 64 02 S1 2011/61 2012/5/23 2012/4/13 Temporary spare tyres Requirements for brake performance test on vehicles equipped with temporary spare wheels and tyres shall be added.
6 Agreement regarding UN/ECE regulation 83 06 S2 2011/56 2012/5/23 2012/4/13 The emission of pollutants according to engine fuel requirements Revision of requirements for the blower with air velocity corresponding to vehicle velocity for Type I test.
7 Agreement regarding UN/ECE regulation 94 02 S1 2011/55 2012/5/23 2012/4/13 Protection of the occupants in the event of a frontal collision The caution label for airbag shall be changed.
R1 Erratum 2012/6/8 Error correction.

PAGETOP

Table of amended regulations (Aug. 2012).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding 
UN/ECE regulation		 13H R2 C2 2012/40 2012/6/4 2012/3/14 Braking (M1) Error correction.
R2 C1 2011/153 2012/5/23 2011/11/16 Error correction.
2 Agreement
regarding
UN/ECE
regulation		 49 R5 C1 2012/39 2012/6/4 2012/3/14 Diesel Emission Error correction.
3 Agreement
regarding
UN/ECE
regulation		 50 R2 C1 2012/27+2012/27/Corr.1 2012/6/4 2012/3/14 Lights
(Moped, Motor Cycle)		 Error correction.
4 Agreement
regarding 
UN/ECE
regulation		 51 R2     2011/11/29   Noise An overall revision.
Agreement
regarding 
UN/ECE
regulation		 51 R2 C1 2012/38 2012/6/4 2012/3/14 Error correction.
5 Adopted
proposal
regarding
UN/ECE
regulation		 92 01   2012/5 2012/3/14   Replacement Silencing System
(Motor Cycle)		 Adjustment with the content of R41.
6 Agreement
regarding 
UN/ECE
regulation

 107 R3 C1 2012/28 2012/6/4 2012/3/14 Category M2 Or M3 Vehicles With Regard To Their General Construction Error correction.
7 Adopted
proposal
regarding
UN/ECE
regulation		 117 02 S1 2012/2 2012/3/14   The Approval Of Tyres With Regard To Rolling Sound Emissions -The wet grip testing method C1 tyres shall be corrected.
-The snow grip testing method of C3 tyres shall be corrected.
Adopted
proposal
regarding
UN/ECE
regulation		 2012/6 2012/3/14  

Regarding the deceleration method, an alternative expression shall be added. 

PAGETOP

Table of amended regulations (Jul. 2012).

*S: Amendment number, C: Error correction number.
Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted proposal regarding UN/ECE regulation 13 11 S9 2011/94 2012/3/14 Braking

Annex 19 Part2: As an alternative to carrying-out dynamic manoeuvres on vehicles, the results from computer simulations may be submitted when applying EVSC for approval.
Annex21　Clarification of vehicle categories to be targeted at. Clarification of conditions for simulation.
2011/94/Amend1 2012/3/14 Annex 19 Part2: As an alternative to carrying-out dynamic manoeuvres on vehicles, the results from computer simulations may be submitted when applying EVSC for approval.
Annex21　Clarification of vehicle categories to be targeted at. Clarification of conditions for simulation.
2012/3 2012/3/14 Clarification of requirements for the minimum braking performance.
2 Adopted proposal regarding UN/ECE regulation 19 04 S3 2012/7 2012/3/14 Front fog lamps -Input voltage for Class F3 equipped with LED module(s) shall be changed, which shall lead to change of the statement in the communication form.
-Correction of allowable extent of a re-aim of the cut-off position for the Class F3.
-Clear description of light sources to be used for the Class F3.
3 Adopted proposal regarding UN/ECE regulation 23 00 S18 2012/8 2012/3/14 Reversing lamps Manoeuvring lamp shall be added.
4 Adopted proposal regarding UN/ECE regulation 34 02 S5 2012/20 2012/3/14 Prevention of fire risks No charge dissipation system is required for fuel tanks designed for containing a fuel with a flash point of at least 55 degrees C.
5 Adopted proposal regarding UN/ECE regulation 37 03 S39 2012/9 2012/3/14 Filament lamps A new light source category H17 shall be introduced.
R6 C1 2012/29 2012/3/14 Correction of physical errors.
2012/29/Corr.1 2012/3/14 Error correction.
6 Adopted proposal regarding UN/ECE regulation 43 01 S1 2012/21 2012/3/14 Uniform provisions concerning the approval of safety glazing materials An amendment to replace "glazing" with "panes".
7 Adopted proposal regarding UN/ECE regulation 46 03 S1 2012/22 2012/3/14 Rear-view mirrors Adjustment with the regulation on projection from external surface.
8 Adopted proposal regarding UN/ECE regulation 48 04 S9 2012/10 2012/3/14 Installation of lights Addition of requirements regarding installation of manoeuvring lamps.
05 S2 2012/37 2012/3/14 Requirements for DRL shall be mitigated.
06 2012/11 2012/3/14 Enhancement of function requirements as well as clarification regarding exterior courtesy lamps.
9 Adopted proposal regarding UN/ECE regulation 58 02 S2 2012/23 2012/3/14 Rear underrun protection Clarification of provisional regulations for transitional period.
10 Adopted proposal regarding UN/ECE regulation 70 01 S8 2012/13 2012/3/14 Rear marking plates for heavy and long vehicles -Clarification of application extent.
-Clarification of requirements for the nozzle to be used for the rainfall test.
11 Adopted proposal regarding UN/ECE regulation 90 02 S1 2012/4 2012/3/14 Replacement brake lining assemblies Clarification of test methods, rules, etc.
12 Agreement regarding UN/ECE regulation 90 02 2011/6 2012/2/17 2011/10/28 Clarification of test methods, rules, etc.
13 Adopted proposal regarding UN/ECE regulation 98 01 S3 2012/15 2012/3/14 Gas-discharge headlamps -UV resistance test shall not be applied to the low-UV-type LED modules.
-Correction of the test voltage for photometric measurement.
-Correction of the judgment criteria at test regarding the change of the vertical position of the "cut off" line under the heat influence.
14 Agreement regarding UN/ECE regulation 98 01 S1 2011/14 2012/2/23 2011/10/28 -Using more than one LED module shall be allowed for the driving beam.
-For adjustment with R123 the maximum luminous intensity of the beam illuminating the surface of the side of road opposite to that of the relevant vehicle shall be 50 cd.
15 Adopted proposal regarding UN/ECE regulation 105 05 S1 2012/24 2012/3/14 The carriage of dangerous goods with regard to their specific constructional features The number of reference standard shall be changed.
16 Adopted proposal regarding UN/ECE regulation 107 04 S2 2012/25 2012/3/14 Category m2 or m3 vehicles with regard to their general construction -When using a gauging device in the gangway of certain vehicle categories, the device may come into contact with any monitor or display device mounted from the ceiling above the gangway on certain conditions.
-Mitigation of requirements for the width of the seat.
R3 C1 2012/28 2012/3/14 Error correction.
17 Adopted proposal regarding UN/ECE regulation 112 01 S3 2012/16 2012/3/14 Headlamps
(with an asymmetrical passing beam)		 -Mitigation of requirements for the aiming test.
-Error correction in the Table UV.
-Adjustment of COP requirements with R98.
-Addition of a definition of light source module.
-Error correction.
18 Adopted proposal regarding UN/ECE regulation 113 01 S1 2012/17 2012/3/14 Headlamps
(with a symmetrical passing beam)		 -LED light source shall be admitted to Class A and Class B.
-Addition of a definition of light source module.
19 Adopted proposal regarding UN/ECE regulation 119 01 S1 2012/18 2012/3/14 Cornering lamps -Error correction.
-Clarification of detailed conditions about light source measurement of colorimetric characteristics.
20 Agreement regarding UN/ECE regulation 119 01 2010/102 2012/3/27 2011/6/23 Cornering lamps -Test voltage shall clearly be prescribed for each bulb category.
-Correction regarding the intensity of the light emitted.
-Error correction.
01/C1 2011/32
21 Adopted proposal regarding UN/ECE regulation 121 00 S7 2012/26 2012/3/14 The location and identification of hand controls,tell-tales and indicators Change of colour of the tell-tale for headlamp as well as addition of new symbol mark(s).
22 Adopted proposal regarding UN/ECE regulation 123 01 S3 2012/19 2012/3/14 AFS -Usage of non replaceable LED modules shall be admitted.
-Correction of requirements for mounting device of LED module.
-Correction of the light intensity criteria for passing beam headlamp.

PAGETOP


Table of amended regulations (Jun. 2012).

*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
5 Agreement regarding UN/ECE regulation 10 04 2011/8 2012/3/6 2011/10/28 Uniform Provisions Concerning the Approval of Vehicles With Regard To Electromagnetic Compatibility Control of current, voltage, etc. for assuring electromagnetic compatibility (EMC) of charger of electric vehicles
04 C1 2011/83 2012/3/6 2011/10/28 Error correction.

PAGETOP

Table of amended regulations (May 2012).

*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement regarding UN/ECE regulation 12 04 C1 2011/66 2012/1/31 2011/6/23 Steering mechanism Error correction.
2 Agreement regarding UN/ECE regulation 14 R4 C1 2011/67 2012/1/31 2011/6/22 Safety belt anchorages Error correction.
3 Agreement regarding UN/ECE regulation 16 R6 C2 2011/68 2012/1/31 2011/6/22 Safety belts Error correction.
4 Agreement regarding UN/ECE regulation 49 05 S2 2009/114+2009/115 2011/5/4 2010/8/19 Diesel emission Consideration of the revision of WHDC, gtr No. 4.
S2/C1 2010/51 2010/8/19 Error correction.
S3 2010/54/Rev.1 2010/12/9 -Addition of provisions for ON-BOARD DIAGNOSTIC SYSTEMS (OBD) regarding engines fuelled with natural gas (NG) or liquefied petroleum gas (LPG).
-Harmonization with ECE R83 regarding vehicles named in application extent. Notification that R49 shall be applied to vehicles with a reference mass exceeding 2610kg.
Agreement regarding UN/ECE regulation 05 S4 2010/128 2011/7/7 2011/6/23 Addition of a particle number test method including measurement at periodic regeneration.
Adopted proposal regarding UN/ECE regulation 05 S5 2011/124 2011/11/16   -Correction of words for adjusting EC regulation with EURO VI.
-Reference standard shall be updated.
5 Adopted proposal regarding UN/ECE regulation 67 01 S10 2011/108 2011/11/16   Specific equipment of vehicle using LPG -Correction of technical requirements according to addition of class 0 to Definition.
-Addition of definition.
Agreement regarding UN/ECE regulation 01 S9 2009/101 2010/10/4 2010/8/19 M1 vehicles having either a maximum total mass > 3500 kg or a body type SA, may be fitted with a heating system to heat the passenger compartment which is connected to the LPG-system.
6 Agreement regarding UN/ECE regulation 75 R2 C1 2011/74 2012/1/31 2011/6/22 Pneumatic tyres (moped, motor cycle) Error correction.
7 Agreement regarding UN/ECE regulation 94 02 Ｃ1 2011/69 2012/1/31 2011/6/23 Protection of the occupants in the event of a frontal collision Error correction.
8 Agreement regarding UN/ECE regulation 115 00 S4/C1 2011/71 2012/1/31 2011/6/22 LPG/CNG retrofit system Error correction.


PAGETOP

Table of amended regulations (Apr. 2012).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN/ECE
regulation		 13 11 S6 2011/3 2011/12/12 2011/10/28 Braking Addition of a requirement to fill identification code of original spare parts prescribed by the rule for spare brake drums and discs in R90 in the approval certificate.
11 S7 2011/4 2011/12/12 2011/10/28 -Revision of conditions for activation of stop lamp regarding vehicles equipped with electric regenerative braking system and/or endurance braking system.
- With regard to the alternative procedure for type approval of trailers application of the alternative procedure to verify ABS performance shall be extended to trailers with 4 or more axles.
2 Agreement
regarding
UN/ECE
regulation		 19 04 S1 2011/9 2011/12/12 2011/10/28 Front fog lamps It shall be prohibited to use a light source of which luminous intensity is equal to, or more than 2000 lumen for Class B front fog lamp.
Adopted
proposal
regarding
UN/ECE
regulation		 04 S2 2011/96 2011/11/16   -Addition of rules for gas-discharge light sources with integrated ballast regarding the gas-discharge light source allowed for Class F3 front fog lamp.
-Revision of transitional rules.
2011/150 2011/11/16   -Addition of rules for gas-discharge light sources with integrated ballast regarding the gas-discharge light source allowed for Class F3 front fog lamp.
-Revision of transitional rules.
2011/130 2011/11/16   -Amendment regarding the photometric requirements for Class F3 front fog lamp.
3 Agreement
regarding
UN/ECE
regulation		 29 03   2010/60 2012/1/2 2011/1/30 Cab of commercial vehicles An overall revision of rules aiming at increasing the cab strength.
-Revision of the contents of impact test to A-pillars of the cab.
-Change of the load for impact test to the roof of the cab.
-Revision of requirements for attachment of the cab to the chassis after the test, etc.
4 Agreement
regarding
UN/ECE
regulation		 43 00 S14 2011/34 2011/12/12 2011/10/28 Uniform provisions concerning the approval of safety glazing materials For vehicles with a driver seat in the central driving position the test area A used for M1 and N1 vehicles shall additionally be applied.
5 Adopted
proposal
regarding
UN/ECE
regulation		 48 04 S8 2011/98 2011/11/16   Installation of lights -Mitigation of requirement for the mounting height of rear fog lamp.
-Correction of the definition of ballast.
-Clarification of the application extent of requirements with regard to replacing a light source.
2011/151 2011/11/16   Adjustment with 03 and subsequent series of amendments to Regulation No. 19.
2011/131 2011/11/16   Clarification of value requirements for objective luminous flux of a light source as well as an LED module.
2011/132 2011/11/16   -Addition of requirements for the case DRL and position lamp are simultaneously activated.
-Correction of transitional rules.
Agreement
regarding
UN/ECE
regulation		 04 S7 2011/11 2011/12/12 2011/10/28

-Correction of requirements for the vertical inclination of cut-off of F3 front fog lamp not exceeding 2000 lumen.
-For a bulb for which more than one test voltages are prescribed the objective luminous flux for low beam shall be applied.
-Automatic switching between high beam and low beam shall be allowed.
-Adaptive main beam shall be admitted.
6 Agreement
regarding
UN/ECE
regulation		 50 00 S15 2011/12 2011/12/12 2011/10/28 Lights (moped, motor cycle) Front position lamps may emit white or amber light.
7 Agreement
regarding
UN/ECE
regulation		 53 01 S13 2011/13 2011/12/12 2011/10/28 Installation of lights (motor cycle) -Front position lamps may emit white or amber light.
-Front position lamp may reciprocally be incorporated with front direction indicator lamp.
-Optional use of tell tale for stop lamp shall be admitted.
8 Agreement
regarding
UN/ECE
regulation		 66 02   2009/100 2010/10/4 2010/8/19 Strength of super structure(large passenger vehicle) -An overall revision of sentences.
-Addition of single-deck rigid or articulated vehicles having more than 16 passengers to the scope.
-Amendment of the definition.
-Addition of transitional rules.
-Amendment of Annexes 1, 3, 5, 6 and 7.
9 Agreement
regarding
UN/ECE
regulation		 95 03   2010/123 2011/11/16 2011/6/23 Protection of the occupants in the event of a lateral collision Test procedures for protection of occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added.
03 C1 2011/70
Adopted
proposal
regarding
UN/ECE
regulation		 03 S1 2011/122 2011/11/16   The definition of "exposed conductive part" for protection of occupants from direct contact with electrically energized parts shall be amended.   
10 Agreement
regarding
UN/ECE
regulation		 107 02 S7 2010/114 2011/10/18 2011/6/23 Category m2 or m3 vehicles with regard to their general construction Revision regarding the size of passenger area as an influence factor for door layout.
Agreement
regarding
UN/ECE
regulation		 R3 erratum 1   2011/12/21   Error correction.
Adopted
proposal
regarding
UN/ECE
regulation		 04 S1 2011/109 2011/11/16   Reciprocal reference with R66 shall be abolished.
05 2011/110 2011/11/16   -Alarm system against fire inside the vehicle shall be introduced. 
2011/110/Corr.1 2011/11/16  
03 S1/C1 2011/136 2011/11/16   Error correction.
R2 C4 2011/137 2011/11/16   Error correction.
2011/137/Corr.1 2011/11/16   Error correction.
Agreement
regarding
UN/ECE
regulation		 03 S2 2011/36 2011/12/12 2011/10/28 -Vehicles of Classes I and A shall not have escape hatches fitted in the roof, if technical components are installed there which present possible dangers to passengers using the escape hatches.
-The gangway mannequin shall be changed. 
Agreement
regarding
UN/ECE
regulation		 04   2011/37 2011/12/12 2011/10/28 For vehicles of Classes I and A the vertical distance between the floor of the seating area at priority seating positions and the adjacent gangway shall not exceed 250 mm.
11 Agreement
regarding
UN/ECE
regulation		 110 00 S9 2009/105 2010/10/4 2010/8/19 Vehicles using cng A revision to refer to ISO regarding the shape of fuel inlet of vehicles powered by CNG. 
12 Adopted
proposal
regarding
UN/ECE
regulation		 113 00 S10 2011/103 2011/11/16  

Headlamps

(with a symmetrical passing beam)

 The provisions regarding lamp bodies shall be rearranged in consideration of introducing gas-discharge light sources with integrated ballast. 
01   2011/104 2011/11/16   A revision to shift to reference luminous flux at 13.2 V.
13 Adopted
proposal
regarding
UN/ECE
regulation		 118 02   2011/111 2011/11/16   The burning behaviour of materials used in the construction of certain categories of motor vehicles The application extent of the burning test of materials used in the compartment shall be widened.
14 Agreement
regarding
UN/ECE
regulation		 RE3 R02 A01   2012/1/25   Consolidated resolution on the construction of vehicles Recommendation on fuel quality parameters shall be added as annex. 
PAGETOP

Table of amended regulations (Mar. 2012).


* S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted proposal regarding UN/ECE regulation. 6 01 S22 2011/128 2011/11/16 Direction indicators -Amendment to delete those items which have unduly been remaining after the revision of intensity of the light emitted.
2 Adopted proposal regarding UN/ECE regulation. 7 02 S20 2011/95 2011/11/16 Front and rear position(side)lamps, stop lamps and end-outline marker lamps Clarification of description with regard to the geometric visibility requirement in the case of an interdependent lamp system.
3 Agreement regarding UN/ECE regulation 02 S19 2011/7 2011/12/12 2011/10/28 Clarification that the rule to comply with the requirement of minimum intensity if one of lamps fails shall be applied only for lamps to be type approved as "D" lamps.
4 Adopted proposal regarding UN/ECE regulation. 10 04 S1 2011/129 2011/11/16 Radio interference suppression The ISO regulation to be referred to shall be changed.
5 Adopted proposal regarding UN/ECE regulation. 12 04 S1 2011/115 2011/11/16 Steering mechanism Revision of the definition of exposed conductive part regarding electric vehicles.
6 Agreement regarding UN/ECE regulation 13H 00 S11 2010/65 2011/10/4 2011/1/30 Braking (m1) - Revision of illuminating requirements of stop lamp when electric regenerative brake is activated.
- The maximum velocity to be applied for testing vehicles equipped with electric regenerative brake regarding confirmation of behaviour on low-adhesion road surfaces shall be changed.
- The maximum velocity to be applied to testing vehicles equipped with electric regenerative brake on low-adhesion road surfaces shall be changed.
- The maximum velocity to be applied tor testing vehicles equipped with regenerative brake on low μ road surface shall be changed.
00 S9/C1 2011/72 2011/6/22 -Error correction.
Adopted proposal regarding UN/ECE regulation. R2 C1 2011/153 2011/11/16 Error correction.
Agreement regarding UN/ECE regulation 00 S12 2011/5 2011/12/12 2011/10/28 Addition of requirement to note identification code in the approval certificate of original spare parts prescribed by the rule for spare brake drums and discs in R90.
7 Adopted proposal regarding UN/ECE regulation. 14 07 S3 2011/116 2011/11/16 Safety belt anchorages Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
8 Agreement regarding UN/ECE regulation 07 S1 2009/109 2010/10/4 2010/8/19 A revision to make adjustment within R14 regarding requirements for equipment of ISOFIX-anchorage.
9 Adopted proposal regarding UN/ECE regulation. 16 06 S2 2011/117 2011/11/16 Safety belts Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
10 Adopted proposal regarding UN/ECE regulation. 17 08 S1 2011/118 2011/11/16 Seats -Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category. -Clear description of requirement that the seat with integrated head restraint shall be padded at the head restraint area.
11 Adopted proposal regarding UN/ECE regulation. 22 05 S2 2011/139 2011/11/16 Motor cycles helmets A revision regarding the symbol mark.
12 Adopted proposal regarding UN/ECE regulation. 34 02 S4 2011/134 2011/11/16 Prevention of fire risks Information list of approval of fuel tanks shall be revised.
13 2011/135 2011/11/16 Recovery of missing contents, which has no influence on technical requirements.
14 Agreement regarding UN/ECE regulation 37 03 S35 2010/17 2011/10/3 2010/12/9 Filament lamps Adoption of new lamp.
03 S35/C1 2010/104 2010/12/9 Error correction.
03 S35/C2 2011/35 2011/3/9 Error correction.
03 S36 2010/96 2011/6/23 Introduction of H16B-bulb.
03 S36/C1 2011/24 2011/6/23 Error correction.
Adopted proposal regarding UN/ECE regulation.  03 S38 2011/97 2011/11/16 Old light source categories shall be phased out.
15 Adopted proposal regarding UN/ECE regulation. 46 03 2011/106 2011/11/16 Rear-view mirrors Revision of mirror requirements regarding mirrors of V and VI classes.
16 Agreement regarding UN/ECE regulation 02 S5 2010/111 2011/12/12 2011/10/28 An amendment to admit application on revision in the application procedure for approval.
17 Adopted proposal regarding UN/ECE regulation. 58 02 S1 2011/107 2011/11/16 Rear underrun protection Increase of categories the regulation shall be applied for.
18 Adopted proposal regarding UN/ECE regulation. 80 03 2011/119 2011/11/16 Seat(large passenger vehicle) Strength and equipment requirements shall be prescribed according to additional application of side-facing seat for vehicles of M3 category.
19 Adopted proposal regarding UN/ECE regulation. 94 01 S4 2011/120 2011/11/16 Protection of the occupants in the event of a frontal collision The caution label for airbag shall be changed.
20 02 S2 2011/121 2011/11/16 Revision of the definition of exposed conductive part regarding electric vehicles..
21 Adopted proposal regarding UN/ECE regulation. 98 01 S2 2011/100 2011/11/16 Gas-discharge headlamps Revision of requirements for lamp for the light source with integrated ballast.
22 Adopted proposal regarding UN/ECE regulation. 99 00 S7 2011/101 2011/11/16 Gas-discharge light sources Introduction of a new gas-discharge light source of 25W.
23 Adopted proposal regarding UN/ECE regulation. 100 01 S1 2011/123 2011/11/16 Electric power train Revision of the definition of exposed conductive part regarding electric vehicles.
24 Adopted proposal regarding UN/ECE regulation. 104 00 S7 2011/133 2011/11/16 Retro-reflective markingsfor heavy and long vehicles Error correction with regard to the coefficient of retro-reflection for Class C,
25 Agreement regarding UN/ECE regulation 112 01 S2 2011/102 2011/11/16 Headlamps (with an asymmetrical passing beam) Clarification of the definition of LED module.
26 Agreement regarding UN/ECE regulation 01 S1 2011/15 2011/12/12 2011/10/28 -Revision of transitional rules.
- Error correction.
27 Adopted proposal regarding UN/ECE regulation. 121 00 S6 2011/112 2011/11/16 The location and identification of hand controls,tell-tales and indicators -Adjustment of terms regarding headlamp with R48.
-Clarification of the definition of tell-tale.
28 Agreement regarding UN/ECE regulation 00 S5 2011/38 2011/12/12 2011/10/28 Addition of a symbol for electronic stability control.
29 Adopted proposal regarding UN/ECE regulation. 122 00 S3 2011/113 2011/11/16 Heating system Safety requirements for LPG combustion heaters and LPG heating systems.
30 Adopted proposal regarding UN/ECE regulation. 123 01 S2 2010/105 2011/11/16 Afs Revision of requirements for lamp for the light source with integrated ballast.
31 Agreement regarding UN/ECE regulation 01 S1 2011/16 2011/12/12 2011/10/28 -Photometric requirements for new adaptive driving beams shall be prescribed.
-Light sources applicable for adaptive front-lighting systems shall be prescribed.
-Lighting cycles for thermal resistance test of adaptive front-lighting systems shall be changed.
-The minimum intensity requirements above the H-line shall be changed.
32 Adopted proposal regarding UN/ECE regulation. 125 00 S4 2011/138 2011/11/16 The forward field of vision Prescription not to consider "radio aerial" conductors, nor "defroster/demisters" to be obstructions to the field of vision.


PAGETOP

Table of amended regulations (Feb. 2012).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN/ECE
regulation		 13 11 S4 2010/3
+corr.1
+corr.2		 2011/8/4 2010/12/9 Braking -Consideration of the new ISO regulation in the electrical connector standard for trailer and tractor.
-Revision of the definition of electric control line.
-Consideration of the new ISO standard for marking of brake fluid.
-Clarification of the extent in which the emergency braking signal shall be activated.
-Clarification of detailed conditions in case a manufacturer voluntarily provides vehicles of N1 category with a vehicle stability function.
-Clarification of the definition of conditions under which a vehicle stability function may not be activated.
-Warning requirements for the case a vehicle stability function is not activated.
S4
/C1		 2010/148 2010/12/9 Error correction.
S5 2010/64 2011/1/30 -Clarification of function and performance requirements for a case the electrical control transmission of ABS should fail.
-Addition of explanation on sp;ecial purpose N2 vehicles excluded from equipment requirement with vehicle stability function and provided with a low-frame chassis, more than two axles and hydrauric braking system.
-Addition of requirements of mechanical coupling for trailers of O1 category.
-Vehicles may undergo the Type-I test or alternatively a Type-III test in the case of an O3 trailer.
-Addition of requirements regarding the spring brake for trailers.
-Revision of mounting location and the calculation method regarding the inertia type parking brake for trailers.
2 Agreement
regarding
UN/ECE
regulation		 80 02 2010/61 2011/10/25 2011/1/30 Seat
(Large passenger vehicle)		 Installation of side-facing seats shall be prohibited in vehicles of categories M2 (of Class III or B) and M3 (of Class III or B).
3 Agreement
regarding
UN/ECE
regulation		 105 05 2010/113 2011/9/28 2011/6/23 The carriage of dangerous goods with regard to their specific constructional features Adjustment with the European regulations with regard to international transport of dangerous goods.
PAGETOP

Table of amended regulations (Jan. 2012).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN
regulation		 6 01 S21 2010/93 2011/10/7 2011/6/23 Direction indicators The Annex prescribing the limits of trichromatic coordinates shall be deleted.
2 Agreement
regarding
UN
regulation		 117 02 2010/63 2011/9/15 2011/1/30 The approval of tyres with regard to rolling sound emissions Addition of requirements for rolling resistance of tyres and relevant test method.
C1 2010/146 2011/9/15 2011/1/30 Error correction.
C2 2011/75 2011/9/15 2011/6/22 Error correction.
C3 2011/76 2011/9/15 2011/6/22 Error correction.
3 Agreement
regarding
UN
regulation		 121 00 S4 2010/116 2011/10/4 2011/6/23 The location and identification of hand controls,tell-tales and indicators The year of issue of the ISO regulations to be referred to regarding symbols identifying controls, tell-tales and indicators shall be renewed.
PAGETOP

Table of amended regulations (Dec. 2011).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation		 41 04 2011/62 2011/6/22 Noise
(motor cycle)		 Addition of test methods for noise emissions during acceleration and those related to ASEP.
2 Agreement
regarding
UN
regulation		 75 00 S13 2009/7 2010/9/7 2009/10/24 Pneumatic tyres
(moped, motor cycle)		 Addition of new tyre sizes.
3 Adopted
proposal
regarding
UN regulation		 R2 C1 2011/74 2011/6/22 Error correction
PAGETOP

Table of amended regulations (Nov. 2011).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation.		 59 01   2011/65 2011/6/22 Replacement silencing system Adjustment with R51 according to the revision of R51.
2 Agreement
regarding
UN regulation		 73 01   2010/38 2011/9/1 2010/12/9 Lateral protection (goods vehicle) The total revision of provisions regarding lateral protection.
3 Agreement
regarding
UN regulation		 103 00 S3 2010/131 2011/8/30 2011/6/23 Replacement catalytic converters -Addition of rules regarding periodically regenerating pollution control system.
-Renewal of the definition of replacement pollution control devices.
PAGETOP

Table of amended regulations (Oct. 2011).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN regulation		 RE3 R02     2011/6/30 - Consolidated resolution on the construction of vehicles Issue of a re-edition with regard to the definition of 3-D H machine, category, etc. to be used for ECE.
2 Adopted
proposal
regarding
UN regulation		 13 11 S8 2011/58 2011/6/22   Braking Vehicles with 4 axles, with a maximum mass not exceeding 25 t and a maximum wheel diameter code not exceeding 19.5 in. shall be equipped with vehicle stability function.
3 Adopted
proposal
regarding
UN regulation		 51 2 S8 2011/63 2011/6/22   Noise Test method regarding the additional sound emission provisions shall be added.
4 Adopted
proposal
regarding
UN regulation		 55 1 S3 2011/60 2011/6/22   Mechanical coupling The design of the drawbar including the coupling head for use on small trailers shall be such as to prevent the coupling head from digging into the ground in the event of separation from the main coupling.
5 Adopted
proposal
regarding
UN regulation		 115 0 S4/C1 2011/71 2011/6/22   LPG/CNG retrofit system Error correction.
6 Agreement
regarding
UN regulation		 123 0 S4 2009/98 2011/6/10 2010/8/19 AFS A revision to prescribe lighting voltage in bundle for each light source category.
1   2010/35 2010/12/9 Rated voltage for lighting lamp at the type approval test shall be changed from 12V to 13.2V.
1 C1 2010/109 2010/12/9 Error correction.
1 C2 2011/33 2011/3/9 Error correction.
PAGETOP

Table of amended regulations (Sep. 2011).


*S: Amendment number, C: Error correction number.
  Document
reference		 Status of
document*		 Working Documents #
(ECE/TRANS/WP.29/)		 Issuing date Entry into force Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN regulation		 3 02 S12 2010/92 2011/7/7 2011/6/23 Reflex reflectors A definition of the measurement procedure of colorimetric characteristics shall be added.
2 Agreement
regarding
UN regulation		 7 02 S18 2010/94 2011/7/7 2011/6/23 Front and rear position(side)lamps, stop lamps and end-outline marker lamps The Annex defining the extent of the trichromatic coordinates shall be deleted.
3 Adopted
proposal
regarding
UN regulation		 10 04 C1 2011/83 2011/6/22   Radio interference suppression Error correction.
4 Agreement
regarding
UN regulation		 12 04   2010/119 2011/7/7 2011/6/23 Steering mechanism Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added.
Adopted
proposal
regarding
UN regulation		 04 C1 2011/66 2011/6/22   Error correction.
5 Adopted
proposal
regarding
UN regulation		 13-H 00 S13 2011/59 2011/6/22   Braking (M1) -Clarification of the method to confirm the correct operational status of electronic systems at a periodic technical inspection.
-"The ESC malfunction tell-tale in a flashing mode may be used" to indicate ESC intervention and/or the intervention of ESC- related systems
00 S9/C1 2011/72 2011/6/22   Error correction.
6 Adopted
proposal
regarding
UN regulation		 14 R4 C1 2011/67 2011/6/22   Safety belt anchorages Error correction.
07 S2 2011/54 2011/6/22   -The requirements for marking of the ISOFIX top tether anchorages shall be clarified.
-Addition of a rule to exempt vehicles with a high engine power from fitting obligation of ISOFIX anchorages.
7 Agreement
regarding
UN regulation		 16 06 S1 2010/121 2011/7/7 2011/6/23 Safety belts -Correction of transitional rules.
-A revision to admit a red warning lamp which is made off when seat belts are used.
Adopted
proposal
regarding
UN regulation		 R6 C2 2011/68 2011/6/22   Error correction.
8 Agreement
regarding
UN regulation		 23 00 S17 2010/95 2011/7/7 2011/6/23 Reversing lamps A revision with regard to measurement procedure of colorimetric characteristics.
9 Agreement
regarding
UN regulation		 50 00 S14 2010/97 2011/7/7 2011/6/23 Lights (moped, motor cycle) -The Annex defining the extent of the trichromatic coordinates shall be deleted.
-It shall be permitted to use a light source with single filament for more than one function by means of changing luminous intensity through control gear.
10 Agreement
regarding
UN regulation		 53 01 S12 2010/98 2011/7/7 2011/6/23 Consideration of Euro5/Euro6 for EC reguration. -Requirements for reciprocal incorporation prescribed in R48 shall be added.
-Prescription of the electric connection for DRL shall be revised.
-The rule prohibiting "head lamp and other function in one" shall be deleted.
-The rule prohibiting "direction indicator lamp and other function in one" as well as "reciprocal incorporation regarding direction indicator lamp" shall be deleted.
11 Adopted
proposal
regarding
UN regulation		 64 02 S1 2011/61 2011/6/22   Temporary spare tyres Requirements for brake performance test on vehicles equipped with temporary spare wheels and tyres shall be added.
12 Agreement
regarding
UN regulation		 65 00 S7 2010/99 2011/7/7 2011/6/23 Special warning lights Prescription of specifications of luminous intensity shall be transferred from the Annex to the main text.
13 Agreement
regarding
UN regulation		 83 06   2009/57
+2009/57/corr.1		 2011/3/14 2010/12/9 The emission of pollutants according to engine fuel requirements Consideration of Euro5/Euro6 regulations in ECE regulation.
2009/134 2011/3/14 2010/12/9
2010/56 2011/3/14 2010/12/9
06 C1 2010/137 2011/3/14 2010/12/9 Error correction.
06 S1 2010/130 2011/7/7 2011/6/23 Revision of requirements for the blower with air velocity corresponding to vehicle velocity. for Type I test.
Adopted
proposal
regarding
UN regulation		 06 S2 2011/56 2011/6/22   Revision of requirements for the blower with air velocity corresponding to vehicle velocity. for Type I test.
14 Agreement
regarding
UN regulation		 91 00 S13 2010/101 2011/7/7 2011/6/23 Side-marker lamps The Annex defining the extent of the trichromatic coordinates shall be deleted.
15 Agreement
regarding
UN regulation		 94 02   2010/122 2011/7/7 2011/6/23 Protection of the occupants in the event of a frontal collision Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a collision, together with relevant amendments, shall be added.
R1 C1 2009/54 2008/3/20 2009/6/24 Error correction.
Adopted
proposal
regarding
UN regulation		 02 C1 2011/69 2011/6/22   Error correction.
02 S1 2011/55 2011/6/22   The caution label for air bag shall be changed.
16 Adopted
proposal
regarding
UN regulation		 95 03 C1 2011/70 2011/6/22   Protection of the occupants in the event of a lateral collision Error correction.
17 Agreement
regarding
UN regulation		 97 01 S6 2010/112 2011/7/7 2011/6/23 Vehicle alarm systems Simplification of approval tests.
18 Agreement
regarding
UN regulation		 116 00 S3 2010/115 2011/7/7 2011/6/23 Protection against unauthorized use Mitigation regarding test items and clarification of test procedures.
19 Agreement
regarding
UN regulation		 122 00 S2 2010/117 2011/7/7 2011/6/23 Heating system A definition of an electric heater shall be added.
PAGETOP

Table of amended regulations (Aug. 2011).


* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 6 01 S16/C2 Direction indicators Error correction.
01 S18/C3 Error correction.
2 Agreement
regarding UN regulation		 7 02 S15/C1 Front and rear position(side)lamps, stop lamps and end-outline marker lamps Error correction.
3 Agreement
regarding UN regulation		 19 R5 C1 Front fog lamps Error correction.
04 C1 Error correction.
4 Agreement
regarding UN regulation		 37 03 S34/C2 Filament lamps Error correction.
5 Agreement
regarding UN regulation		 39 R1 C1 Speedometer Error correction.
6 Agreement
regarding UN regulation		 43 R2 C1 Uniform provisions concerning the approval of safety glazing materials Error correction.
7 Agreement
regarding UN regulation		 48 R6 C3 Installation of lights Error correction.
04 S5/C1 Error correction.
05 C1 Error correction.
8 Agreement
regarding UN regulation		 70 01 S7/C1 Rear marking plates for heavy and long vehicles Error correction.
9 Agreement
regarding UN regulation		 87 R2 C2 Daytime running lamps Error correction.
10 Adopted
proposal
regarding
UN regulation.		 90 02   Replacement brake lining assemblies Clarification of description with regard to test methods, rules, etc.
11 Agreement
regarding UN regulation		 98 01 C1 Gas-discharge headlamps Error correction.
12 Agreement
regarding UN regulation		 107 02 S5/C1 Category m2 or m3 vehicles with regard to their general construction Error correction.
13 Agreement
regarding UN regulation		 112 01 C1 Headlamps (with an asymmetrical passing beam) Error correction.
14 Agreement
regarding UN regulation		 113 00 S9/C1 Headlamps (with a symmetrical passing beam) Error correction.
PAGETOP

Table of amended regulations (Jul. 2011).


* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation.		 13 11 S6 Braking Adoption of a requirement to enter the identification code of the original replacement parts in the certificate of approval just as prescribed in the rule for replacement drums/discs of R90.
11 S7 1) Revision of conditions for activation of stop lamp regarding vehicles equipped with electric regenerative braking system and/or endurance braking system.
2) With regard to the alternative procedure for type approval of trailers application of the alternative procedure to verify ABS performance shall be extended to trailers with 4 or more axles.
2 Adopted
proposal
regarding
UN regulation.		 43 R2 C1 Uniform provisions concerning the approval of safety glazing materials Error correction.
00 S14 For vehicles provided with driver seat in the central driving position the test area A used for M1 and N1 vehicles shall additionally be applied.
01 Transposition of the requirements of gtr.6 into ECE R.43.
3 Adopted
proposal
regarding
UN regulation.		 46 02 S5 Rear-view mirrors Amendment to introduce the concept of "revision of approvals" into the application procedure for approval.
4 Agreement
regarding UN regulation		 51 02 C3 Noise Error correction.
5 Adopted
proposal
regarding
UN regulation.		 87 R2 C2 Daytime running lamps Error correction.
6 Adopted
proposal
regarding
UN regulation.		 107 02 S5
/C1		 Category m2 or m3 vehicles with regard to their general construction Error correction.
03 S2 1) Vehicles of Classes I and A shall not have escape hatches fitted in the roof where technical components are installed which present possible dangers to passengers using the escape hatches. 2) The lower edges of the gangway mannequin shall be rounded off by R25.
04 For vehicles of Classes I and A the vertical distance between the floor of the seating area and the adjacent gangway shall not be more than 250 mm.
7 Adopted
proposal
regarding
UN regulation.		 121 00 S5 The location and identification of hand controls,tell-tales and indicators A symbol mark for the electronic stability control (including malfunction) shall be added.
8 Adopted
proposal
regarding
UN regulation.		 123 01 C2 AFS Error correction.
01 S1 1) The beam pattern of the new high beam with adjustable distribution shall be prescribed.
2) Light sources which can be used for AFS shall be prescribed.
3) The lighting cycle for the heat resistance test on AFS shall be revised.
4) The minimum luminous intensity requirements above the H-line shall be revised.
PAGETOP

Table of amended regulations (Jun. 2011).


* S: Amendment number, C: Error correction number.

Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation.		 6 01 S16/C2 Direction indicators Error correction.
01 S18/C3 Error correction.
2 Adopted
proposal
regarding
UN regulation.		 10 04 Radio interference suppression Limitation for voltage changes, voltage fluctuations, etc. for the sake of EMC regarding the charger of electric vehicles.
3 Adopted
proposal
regarding
UN regulation.		 13-H 00 S12 Braking (m1) Adoption of a requirement to enter the identification code of the original replacement parts in the certificate of approval just as prescribed in the rule for replacement drums/discs of R90.
4 Adopted
proposal
regarding
UN regulation.		 19 R5 C1 electric power train Error correction.
04 C1 Error correction.
04 S1 It shall be prohibited to use a light source of which luminous intensity exceeds 2000 lumen for the Class B front fog lamp.
5 Adopted
proposal
regarding
UN regulation.		 39 R1 C1 Speedometer Error correction.
6 Adopted
proposal
regarding
UN regulation.		 48 R6 C3 Installation of lights Error correction.
04 S5/C1 Error correction.
05 C1 Error correction.
04 S7 -Revision of requirements for the vertical angle of F3 front fog lamp of which liminous intensity does not exceed 2000 lumen.
-In case of filament lamps for which more than one test voltage is specified, the objective flux which produces dipped beam shall be applied.
-Permission of automatic transition from main beam to dipped beam and vice versa.
-Permission of a main beam with variable luminous beam pattern.
7 Adopted
proposal
regarding
UN regulation.		 50 00 S15 Lights (moped, motor cycle) Permission of amber colour for optional use for the front position lamp.
8 Adopted
proposal
regarding
UN regulation.		 53 01 S13 Installation of lights (motor cycle) -Permission of amber colour for optional use for the front position lamp.
-Permission of the front position lamp reciprocally incorporated in the front direction indicator lamp.
-Permission of a tell-tale optional for the stop lamp.
9 Adopted
proposal
regarding
UN regulation.		 70 01 S7/C1 Rear marking plates for heavy and long vehicles Error correction.
10 Adopted
proposal
regarding
UN regulation.		 98 01 C1 Gas-discharge headlamps Error correction.
01 S1 -Permission of using more than one LED module for the driving beam.
-Adjustment with R123 regarding the maximum luminous intensity of 50 lux for lighting the ground surface, etc. of the lane for oncoming vehicles.
11 Agreement
regarding UN regulation		 100 01   Electric power train -The scope shall be extended so as to apply for vehicles of M, N categories including those driven by hybrid, hydrogen, or fuel cell propulsion systems.
-An overall revision of requirements for protection against direct contact, isolation resistance, other functions, etc.
12 Adopted
proposal
regarding
UN regulation.		 112 01 C1 Headlamps (with an asymmetrical passing beam) Error correction.
01 S1 Error correction.
13 Adopted
proposal
regarding
UN regulation.		 113 00 S9/C1 Headlamps(with a symmetrical passing beam) Error correction.
14 Adopted
proposal
regarding
UN regulation.		 119 01 C1 Cornering lamps Error correction.
PAGETOP

Table of amended regulations (May 2011).


* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 7 02 S16 Front and rear position(side)lamps, stop lamps and end-outline marker lamps For simplification of light distribution requirements, the same requirements shall be applied throughout one category of device, regardless of the number of light source(s) used.
2 Agreement
regarding UN regulation		 02 S17 Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
-For adjustment with R48 a category name shall be added.
-A marking rule for interdependent lamp shall be added after which an interdependent lamp system consisting of more than one interdependent lamps may be regarded as one lamp.
3 Adopted
proposal
regarding
UN regulation.		 02 S15/C1 Error correction.
02 S19 Clarification that the rule to fulfil the minimum intensity requirements when one lamp fails shall be applied only to "D" lamps.
4 Agreement
regarding UN regulation		 12 R3 C4 Steering mechanism Error correction.
5 Agreement
regarding UN regulation		 16 06 C2 Safety belts Error correction.
6 Agreement
regarding UN regulation		 37 03 S32/C2 Filament lamps Error correction.
7 Adopted
proposal
regarding
UN regulation.		 03 S34/C2 Error correction.
03 S35/C2 Error correction.
03 S36/C1 Error correction.
03 S37 -In addition to the reference luminous flux at 13.2V a reference luminous flux 1650lm at 12.2V shall be included in the H9 data sheet.
-9 bulbs shall be transferred from Group 2 to Group 3.
8 Agreement
regarding UN regulation		 44 R2 C4 Child restraint systems Error correction.
9 Agreement
regarding UN regulation		 48 04 S4/C1 Installation of lights Error correction.
R6 C1 Error correction.
R6 C2 Error correction.
04 S3/C1 Error correction.
04 S4 -Requirements for the fitting height of retro-reflectors as well as side retro-reflectors shall be moderated.
-Fitting side direction indicator lamps of category 5, or 6 on vehicles exceeding 9 meters in length shall be permitted.
-Requirements for fitting side retro-reflectors and side marker lamps on a passenger vehicle the length of which exceeds 6m but does not exceed 7m shall be moderated.
-Requirements for fitting cornering lamps shall be moderated.
-With regard to fitting retro-reflectors minimum distance requirements for adjacent retro-reflectors shall be moderated.
-Understanding of "light emitting surface", "illuminating surface", etc. shall be additionally described.
04 S5 In addition to type "D"lamps type "Y" Interdependent lamps shall be included.
04 S6 -The maximum intensity of the main beam of the headlamp shall be revised.
-Definition of, and rules regarding rear-end collision alert signal shall be added.
-Detailed conditions for making DRL ON/OFF shall be added.
-Revision of fitting rules according to addition of category names to R7.
-Addition of COP-requirements regarding the class "F3" front fog lamps.
-Fitting line conspicuity markings on the front of large trailers shall be allowed.
05 When DRL is existing, automatic lighting of the passing beam of the headlamp at predetermined ambient luminous intensity shall be mandatory.
10 Agreement
regarding UN regulation		 51 02 S7 Noise Addition of a definition of a silencing system using the absorbing fibrous material.
11 Adopted
proposal
regarding
UN regulation.		 02 C3 Error correction.
12 Agreement
regarding UN regulation		 55 01 S2 Mechanical coupling Addition of requirements of secondary coupling for an unbraked O1 trailer and obligation of fitting relevant equipments.
13 Agreement
regarding UN regulation		 83 05 S7/C1 The emission of pollutants according to engine fuel requirements Error correction.
14 Agreement
regarding UN regulation		 89 00 S2 Speed limitation devices Addition of categories of vehicles which shall be equipped with SLD/SLF.
15 Agreement
regarding UN regulation		 124 00 S1 Wheels for passenger cars -Extension of the scope.
-Introduction of a wheel family concept, and, accordingly, the test on a representative product shall be prescribed.
-Clarification of test methods: Repetitive torque test shall be abolished, impact test shall be carried out according to ISO 7141, with regard to material tests tensile strength test shall be added on aluminium as well as magnesium wheels, etc.
16 Agreement
regarding UN regulation		 125 00 C1 The forward field of vision Error correction.
 

Table of amended regulations (Apr. 2011).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #

1

 Agreement
regarding
UN regulation		 50 00 S13 Lights (moped, motor cycle) Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
2 Agreement
regarding
UN regulation		 53 01 S11 Installation of lights (motor cycle) -A headlamp equipped with a Horizontal inclination adjustment system (HIAS) shall be admitted.
-In the case of two daytime running lamps, the distance separating the illuminating surfaces shall be changed so that they do not exceed 420 mm.
3 Agreement
regarding
UN regulation		 77 00 S13 Parking lamps Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
5 Agreement
regarding
UN regulation		 87 00 S15 Daytime running lamps Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
6 Agreement
regarding
UN regulation		 91 00 S12 Side-marker lamps -Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
-Addition of a column to application document to enter if the mounting height is equal to, or less than 750mm, etc.
7 Agreement
regarding
UN regulation		 98 00 S13 Gas-discharge headlamps -Clear prescription of requirements for aging time.
-It shall be clearly described that light sources with passing beam function only shall be exempted from testing.
-A revision to prescribe lighting voltage in bundle for each light source category.
8 01   Lighting voltage of lamp at the type approval test shall be changed to 13.2V.
9 Agreement
regarding
UN regulation		 99 00 S5 Gas-discharge light sources Selective yellow colour shall be introduced again in accordance with introduction of Class F3 front fog lamp.
10 00 S6 -It shall be clarified that the maximum outer dimensions shall be measured from the reference plane.
-Drawings shall be corrected.
-Measurement conditions of the relative luminance of the R Type shall be clearly described.
-It shall be clarified that the gas discharge light source shall be of low UV type.
11 Agreement
regarding
UN regulation		 101 00 S9 Emission of carbon dioxide and fuel consumption (passenger car) Addition of emission test procedure on vehicles equipped with more than one periodically regenerating systems.
12 01   Adjustment with EC-Directive.
13 Agreement
regarding
UN regulation		 112 01   Headlamps (with an asymmetrical passing beam) Lighting voltage of lamp at the type approval test shall be changed from 12V to 13.2V.
14 Agreement
regarding
UN regulation		 118 01   The burning behavior of materials used in the interior construction of certain categories of motor vehicles The capability of materials to repel fuel or lubricants shall be expressed in the title and the scope.
15 Agreement
regarding
UN regulation		 119 00 S5 Cornering lamps Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
 PAGETOP

Table of amended regulations (Mar. 2011).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN regulation		 4 00 S15 REAR REGISTRATION PLATE LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
2 Agreement
regarding
UN regulation		 6 01 S20 DIRECTION INDICATORS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
S19 In order to simplify requirements for the luminous intensity, a unified set of requirements shall be applied regardless of the number of light sources.
3 Agreement
regarding
UN regulation		 10 03 S1 RADIO INTERFERENCE SUPPRESSION The provisional rule effective till 4. November 2008 shall be deleted.
4 Adopted
proposal
regarding
UN regulation.		 13 11 S4/C1 BRAKING Error correction.
5 Agreement
regarding
UN regulation		 13H 00 S10 BRAKING (M1) Clarification of requirements for emergency braking signal.
6 Adopted
proposal
regarding
UN regulation.		 16 06 S1 SAFETY BELTS -Amendment of transitional rules.
-A revision to admit a red warning lamp which is put off when occupant(s) use(s) the seat belt.
06 C2 Error correction.
7 Adopted
proposal
regarding
UN regulation.		 23 00 S17 REVERSING LAMPS A revision regarding measurement procedure of colorimetric characteristics.
Agreement
regarding
UN regulation		 00 S16 Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
8 Agreement
regarding
UN regulation		 38 00 S15 REAR FOG LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
9 Agreement
regarding
UN regulation		 43 00 S13 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SAFETY GLAZING MATERIALS Clarification of the scope.
10 Adopted
proposal
regarding
UN regulation.		 44 R2 C4 CHILD RESTRAINT SYSTEMS Error correction.
11 Adopted
proposal
regarding
UN regulation.		 48 R6 C1 INSTALLATION OF LIGHTS Error correction.
R6 C2 Error correction.
04 S4/C1 Error correction.
12 Adopted
proposal
regarding
UN regulation.		 49 05 S4 DIESEL EMISSION Addition of a particle number test method including measurement at periodic regeneration.
13 Agreement
regarding
UN regulation		 64 02   TEMPORARY SPARE TYRES Error correction.
02 C1
14 Adopted
proposal
regarding
UN regulation.		 65 00 S7 SPECIAL WARNING LIGHTS The sentences in the Annex to be referred to regarding the photometric specifications shall be replaced with those in the main text.
15 Adopted
proposal
regarding
UN regulation.		 83 05 S10 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS The allowable limits for Type IV test shall be revised. Requirements for cooling fan with air velocity corresponding to vehicle velocity shall be revised as well.
06 S1 Revision of requirements for the fan with air velocity corresponding to vehicle velocity. for Type I test. (Revision of different series from above.)
05 S7/C1 Error correction.
06 C1 Error correction.
16 Adopted
proposal
regarding
UN regulation.		 97 01 S6 VEHICLE ALARM SYSTEMS Simplification of the test procedure for approval.
17 Adopted
proposal
regarding
UN regulation.		 103 00 S3 REPLACEMENT CATALYTIC CONVERTERS -Addition of rules regarding periodically regenerating pollution control system.
-Renewal of the definition of replacement pollution control devices.
18 Adopted
proposal
regarding
UN regulation.		 105 05   THE CARRIAGE OF DANGEROUS GOODS WITH REGARD TO THEIR SPECIFIC CONSTRUCTIONAL FEATURES Harmonization with EC regulation regarding international transportation of dangerous products.
19 Adopted
proposal
regarding
UN regulation.		 107 02 S7 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION Revision regarding the size of passenger area as an influence factor for door layout.
Agreement
regarding
UN regulation		 Erratum   Error correction.
03   Addition of transitional rules to the 03 series of amendments.
02 S6 -Revision regarding the opening size of emergency window and escape hatch. -Revision of transitional rules.
03 S1 -Clarification of the definition of floor and deck.
-Clear description of the step height.
20 Agreement
regarding
UN regulation		 113 00 S9 HEADLAMPS (WITH A SYMMETRICAL PASSING BEAM) -Clear definition of aging time.
-A revision to prescribe lighting voltage in bundle for each light source category.
21 Agreement
regarding
UN regulation		 115 00 S4 LPG/CNG Retrofit System Revision of test methods for specific LPG retrofit system and specific CNG retrofit system.
22 Adopted
proposal
regarding
UN regulation.		 117 02 C1 THE APPROVAL OF TYRES WITH REGARD TO ROLLING SOUND EMISSIONS Error correction.
23 Adopted
proposal
regarding
UN regulation.		 121 00 S4 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS,TELL-TALES AND INDICATORS Concerning the ISO regulation to be referred to regarding identification symbol of controls, tell-tales and indicators, the current regulation shall be replaced with one of a later year of issue.
24 Adopted
proposal
regarding
UN regulation.		 122 00 S2 HEATING SYSTEM Addition of a definition of electric heater.
25 Adopted
proposal
regarding
UN regulation.		 125 00 C1 THE FORWARD FIELD OF VISION Error correction.
Agreement
regarding
UN regulation		 00 S2 Clear definition of the position of adjustable steering wheel for visibility measurement.
S3 Introduction of a definition of the area "S".
 PAGETOP

Table of amended regulations (Feb. 2011).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation.		 3 02 S12 REFLEX REFLECTORS Error correction.
2 Adopted
proposal
regarding
UN regulation.		 6 01 S21 DIRECTION INDICATORS The Annex prescribing the limits of trichromatic coordinates shall be deleted.
3 Adopted
proposal
regarding
UN regulation.		 7 02 S18 FRONT AND REAR POSITION(SIDE)LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS The Annex prescribing the limits of trichromatic coordinates shall be deleted.
4 Adopted
proposal
regarding
UN regulation.		 12 04   STEERING MECHANISM Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a frontal collision, together with relevant amendments, shall be added.
R3 C4 Error correction.
5 Agreement
regarding
UN regulation		 19 Erratum   FRONT FOG LAMPS Error correction.
6 Agreement
regarding
UN regulation		 27 Erratum   WARNING TRIANGLES Error correction.
7 Agreement
regarding
UN regulation		 37 03 S34 FILAMENT LAMPS -The measuring method of bulb colour shall be clarified. Accordingly, remarks shall be added to the communication form and COP requirements shall be changed.
-Addition of new lamps.
03 S34/C1 Error correction.
Erratum   Error correction.
Adopted
proposal
regarding
UN regulation.		 03 S36 -Adoption of H16B lamps.
03 S32/C1 Error correction.
03 S35/C1 Error correction.
8 Adopted
proposal
regarding
UN regulation.		 50 00 S14 LIGHTS (MOPED, MOTOR CYCLE) -The Annex prescribing the limits of trichromatic coordinates shall be deleted.
-It shall be permitted to use a light source with single filament for more than one function by means of changing luminous intensity through control gear.
9 Adopted
proposal
regarding
UN regulation.		 53 01 S12 INSTALLATION OF LIGHTS (MOTOR CYCLE) -Requirements for reciprocal incorporation prescribed in R48 shall be added.
-Prescription of the electric connection for DRL shall be revised.
-The rule prohibiting "head lamp and other function in one" shall be deleted.
-The rule prohibiting "direction indicator lamp and other function in one" as well as "reciprocal incorporation regarding direction indicator lamp" shall be deleted.
10 Adopted
proposal
regarding
UN regulation.		 77 00 S14 PARKING LAMPS -The Annex prescribing the limits of trichromatic coordinates shall be deleted.
11 Adopted
proposal
regarding
UN regulation.		 91 00 S13 SIDE-MARKER LAMPS -The Annex prescribing the limits of trichromatic coordinates shall be deleted.
12 Adopted
proposal
regarding
UN regulation.		 94 02   PROTECTION OF THE OCCUPANTS IN THE EVENT OF A FRONTAL COLLISION Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a frontal collision, together with relevant amendments, shall be added.
13 Adopted
proposal
regarding
UN regulation.		 95 03   PROTECTION OF THE OCCUPANTS IN THE EVENT OF A LATERAL COLLISION Test Procedures for the protection of the occupants of vehicles operating on electrical power from high voltage and electrolyte spillage in a frontal collision, together with relevant amendments, shall be added.
14 Agreement
regarding
UN regulation		 98 Erratum   GAS-DISCHARGE HEADLAMPS Error correction.
15 Agreement
regarding
UN regulation		 104 Erratum   RETRO-REFLECTIVE MARKINGSFOR HEAVY AND LONG VEHICLES Error correction.
16 Agreement
regarding
UN regulation		 112 00 S8/C2 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Error correction.
S8/C3 Error correction.
S11 Introduction of terms with regard to passing beam.
S12 A revision to prescribe lighting voltage in bundle for each light source category.
17 Adopted
proposal
regarding
UN regulation.		 116 00 S3 PROTECTION AGAINST UNAUTHORIZED USE Mitigation of test items and clarification of test procedure.
18 Adopted
proposal
regarding
UN regulation.		 119 01   CORNERING LAMPS -Clear prescription of test voltage for each bulb category.
-Revision of intensity of the light emitted.
19 Adopted
proposal
regarding
UN regulation.		 123 01 C1 AFS Error correction.
 PAGETOP

Table of amended regulations (Jan. 2011).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN regulation		 48 04 S3/C2 INSTALLATION OF LIGHTS Error correction.
2 Agreement
regarding
UN regulation		 78 03 C2 BRAKING
(CATEGORY L)		 Error correction.
3 Adopted
proposal
regarding
UN regulation.		 83 06 corrigendum THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS Error correction.
06   Consideration of Euro5/Euro6 for EC regulation.
ECE-TRANS-WP29-2009-57e.pdf
ECE-TRANS-WP29-2009-134e.pdf
ECE-TRANS-WP29-2010-56e.pdf
06  
06  
4 Agreement
regarding
UN regulation		 90 R2 C1 REPLACEMENT BRAKE LINING ASSEMBLIES Error correction.
5 Agreement
regarding
UN regulation		 108 Erratum   RETREADED
PNEUMATIC TYRE （MOTOR VEHICLE）		 Error correction.
6 Agreement
regarding
UN regulation		 121 Erratum   THE LOCATION AND IDENTIFICATION OF HAND CONTROLS,TELL-TALES AND INDICATORS Error correction.
 PAGETOP

Table of amended regulations (Dec. 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation.		 48 04 S5 INSTALLATION OF LIGHTS In addition to type "D" lamps, interdependent lamps (type "Y" lamps,) shall be introduced
2 Agreement
regarding
UN regulation		 74 01 S6 INSTALLATION OF LIGHTS (MOPED) Even for vehicles of category L1 the requirement shall be applied that the headlamp shall automatically be on when the engine is running.
3 Adopted
proposal
regarding
UN regulation.		 117 02   THE APPROVAL OF TYRES WITH REGARD TO ROLLING SOUND EMISSIONS Addition of requirements of rolling resistance of tyre and test method.
 PAGETOP

Table of amended regulations (Nov. 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN regulation		 13 11 S1 BRAKING Addition of the contents defined in the revised ISO11992.
11 S1
Addendum
11 S2 -Clarification of application procedure for approval of trailer axles.
-A revision to adjust the residual braking performance in case ABS of A trailer fails with that in case electrically controlled transmission fails.
  R6-C2 Error correction.
2 Agreement
regarding
UN regulation		 13H 00 S9 BRAKING (M1) Addition of definition, test method, technical requirements, data processing method, etc. with regard to vehicles equipped with BAS(Brake Assist System). 
3 Adopted
proposal
regarding
UN regulation.		 29 03   CAB OF COMMERCIAL VEHICLES An overall revision of rules aiming at enhancing the cab strength.
4 Agreement
regarding
UN regulation		 34 02 S3 PREVENTION OF FIRE RISKS A revision to facilitate the approval in case capacity variations of liquid fuel tanks shall be added, or new series of liquid fuel tanks shall be introduced.
 PAGETOP

Table of amended regulations (October 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding
UN regulation		 7 02 S15 FRONT AND REAR POSITION(SIDE)LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Visibility angle requirements toward inside and below the horizontal for front position lamps shall be moderated.
02 S12
/C3		 Error correction.
Adopted
proposal
regarding
UN regulation.		 7 02 S17 FRONT AND REAR POSITION(SIDE)LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS -Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
-For adjustment with R48 the category name shall be added.
-A marking rule for interdependent lamp shall be added under which an interdependent lamp system consisting of more than one interdependent lamps may be regarded as one lamp.
2 Adopted
proposal
regarding
UN regulation.		 13 11 S5 BRAKING -Clarification of requirements for functions and performance of anti-lock system in case of a defect in electrical control transmission.
-Addition of description of low-framed N2 vehicles with more than 3 axles and with hydraulic brake system among special purpose vehicles, which are excluded from obligation of providing vehicle stability function.
-Addition of requirements of mechanical coupling for O1 trailers.
-Alternative selection of Type III test shall be allowed for O3 trailers.
-Addition of requirements for spring brake of trailers.
-Revision regarding mounting position and calculation method regarding parking brake in inertia braking system of trailers.
3 Adopted
proposal
regarding
UN regulation.		 13-H 00 S11 BRAKING (M1) -Revision of requirements for activation of stop lamp when electric regenerative braking system (RBS) is in function.
-The maximum speed in behaviour test of vehicles with RBS on low adhesion track shall be changed.
4 Adopted
proposal
regarding
UN regulation.		 37 03 S34
/C1		 FILAMENT LAMPS Error correction.
5 Adopted
proposal
regarding
UN regulation.		 48 04 S6 INSTALLATION OF LIGHTS -Amendment regarding the maximum intensity of main-beam of headlamp.
-Addition of rear end collision alert signal.
-Addition of detailed conditions to make DRL on/off.
-According to addition of category name in R7, mounting requirements shall be revised.
-Addition of COP-requirements for F3 fog lamps.
-Attachment of line conspicuity marking to the front of large trailers shall be admitted.
05   If daytime running lights are present, the dipped beam headlamp shall be switched on and off automatically relative to the given ambient light conditions.
04 S3
/C2		 Error correction.
Agreement
regarding
UN regulation		 48 03 S4
/C1		 INSTALLATION OF LIGHTS Error correction.
04 S2 Requirements for courtesy lamp shall be added, and the rule for the position of DRL in width shall be changed.
04 S3 -Definitions of independent, grouped, combined and reciprocally incorporated lamps shall be revised.
-Treatment of non-textured lenses shall be clarified. 
-Definitions of colorimetric characteristics regarding retro-reflecting devices shall be gathered.
-Lighting conditions for position lamp shall be moderated.
-Vehicle voltage to be supplied to lamps shall be given certain restrictions.
-The maximum intensity of driving beam in R98 shall be increased.
-Visibility angle requirements toward inside and below the horizontal for front turn signal lamps and front position lamps shall be moderated. 
-Requirements for mounting retro-reflectors shall be moderated.
  R5
/C1		 Error correction.
04 S2
/C1		 Error correction.
6 Adopted
proposal
regarding
UN regulation.		 51 02 S7 NOISE Addition of a definition of silencing device using sound absorbing fibrous material.
7 Adopted
proposal
regarding
UN regulation.		 55 01 S2 MECHANICAL COUPLING Requirements regarding secondary coupling for O1 trailers without brake system shall be added and equipment of relevant components shall be mandatory.
8 Adopted
proposal
regarding
UN regulation.		 64 02 C1 TEMPORARY SPARE TYRES Error correction.
9 Adopted
proposal
regarding
UN regulation.		 78 03 C2 BRAKING (CATEGORY L) Error correction.
10 Adopted
proposal
regarding
UN regulation.		 80 02   SEAT(LARGE PASSENGER VEHICLE) Installation of side-facing seats in vehicles of categories M2 (of Class III or B) and M3 (of Class III or B) shall be prohibited.
11 Adopted
proposal
regarding
UN regulation.		 89 00 S2 SPEED LIMITATION DEVICES Vehicle categories equipped with SLD or SLF shall be added.
12 Adopted
proposal
regarding
UN regulation.		 90 R2 C1 REPLACEMENT BRAKE LINING ASSEMBLIES Error correction.
13 Agreement
regarding
UN regulation		 104 00 S6 RETRO-REFLECTIVE MARKINGSFOR HEAVY AND LONG VEHICLES -Addition of a definition of "colour of retro-reflection light of device".
-In case of generation of a colourless surface reflection illumination entrance angle shall be changed, and a regulation to be referred to shall be inserted.
-Prescription of requirements for colour fastness of exposed specimen.
R1 C2 Error correction.
14

Adopted
proposal
regarding
UN regulation.

 118 corrigendum   THE BURNING BEHAVIOUR OF MATERIALS USED IN THE INTERIOR CONSTRUCTION OF CERTAIN CATEGORIES OF MOTOR VEHICLES Error correction.
00 S1 The capability of materials to repel fuel or lubricants shall be expressed in the title and the scope.
15 Adopted
proposal
regarding
UN regulation.		 124 00 S1 WHEELS FOR PASSENGER CARS -Extension of the scope.
-Clarification of details of the test.
 PAGETOP

Table of amended regulations (September 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 6 01 S18/C2 DIRECTION INDICATORS Error correction.
2 Agreement
regarding UN regulation		 10 03 C1 RADIO INTERFERENCE SUPPRESSION Error correction.
3 Agreement
regarding UN regulation		 11 03 S2 DOOR LATCHES & HINGES Extension of application to doors which open in a vertical direction, and clarification of test method accordingly.
4 Adopted
proposal
regarding
UN regulation.		 13 11 S4 BRAKING Error correction.
Error correction.
-Reference to new ISO-Regulations for the standard of electric connection between towing vehicle and trailer.
-Revision of the definition of electric control line.
-Reference to new ISO regulation for the symbol mark of brake fluid.
-Clarification of conditions under which emergency braking signal shall be activated, or de-activated.
-Clarification of detailed conditions for the case that manufacturer will equip a vehicle of N1-category with a vehicle stability function.
-Clarification of the definition of conditions under which the vehicle stability function may not be activated.
-Warning requirements for the case that vehicle stability function is disabled.
Agreement
regarding UN regulation		 R6 C3 Error correction.
11 S3 Application of a new expression to the definition of vehicle stability function. Addition of warning signal for the case that the vehicle stability function fails.
5 Agreement
regarding UN regulation		 19 03 C5 FRONT FOG LAMPS Error correction.
6 Agreement
regarding UN regulation		 27 R1 C1 WARNING TRIANGLES Error correction.
7 Agreement
regarding UN regulation		 37 R5 C1 FILAMENT LAMPS Error correction.
03 S32/C1 Error correction.
03 S33/C1 Error correction.
R5 C2 Error correction.
R5 amendment3-erratum Error correction.
Adopted
proposal
regarding
UN regulation.		 03 S35 -Addition of lamps.
8 Adopted
proposal
regarding
UN regulation.		 43 00 S13 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SAFETY GLAZING MATERIALS Clarification of the scope.
9 Adopted
proposal
regarding
UN regulation.		 73 01   LATERAL PROTECTION (GOODS VEHICLE) A total revision of rules on lateral protection devices.
10 Agreement
regarding UN regulation		 85 00 S5 MEASUREMENT OF ENGINE POWER In order to simplify European regulations, the Directive 80/1269 shall be abolished by means of unifying it with R85.
-Addition of description that both of the naturally aspirated and supercharged engines shall be targeted at.
-Addition of definitions regarding "maximum net power" as well as "standard-production equipment".
-Addition of rules regarding acquisition of vehicle approval.
-Revision of standard temperature for Wobbe index of natural gas to be used as test fuel.
-Addition of prescription that positive ignition engines of vehicles that can run either on petrol, or on a gaseous fuel are to be tested with both fuels.
-Net power shall be determined by the average value of measurements that are carried out twice.
-Adjustment of notification items in application documents with EC Directive.
11 Adopted
proposal
regarding
UN regulation.		 87 00 S15 DAYTIME RUNNING LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
12 Adopted
proposal
regarding
UN regulation.		 99 00 S6 GAS-DISCHARGE LIGHT SOURCES -Clarification that the maximum outer distance shall be measured from the reference plane.
-Amendment of drawings.
-Clarification of the relative luminance of the R-Type.
-Clarification that the gas-discharge light source shall be of the low UV type.
13 Adopted
proposal
regarding
UN regulation.		 101 01 corrigendum EMISSION OF CARBON DIOXIDE AND FUEL CONSUMPTION (PASSENGER CAR) Error correction.
01 corrigendum Error correction.
01   Adjustment with EC Directive.
14 Adopted
proposal
regarding
UN regulation.		 107 03 S1 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION -Clarification of definitions of "floor" and "deck".
-Clarification of step height.
02 S6 -Amendment regarding the opening size of Emergency Window and Escape hatch.
-Amendment of transitional regulation.
Agreement
regarding UN regulation		 R2 C2 Error correction.
15 Agreement
regarding UN regulation		 109 00 S5 RETREADED PNEUMATIC TYRE （COMMERCIAL VEHICLE） -Addition of definitions.
-Amendment of rules regarding inspection method.
-Application for approval of tyres having additional sidewall protection shall be allowed.
00 S6 Clarification of the scope.
16 Adopted
proposal
regarding
UN regulation.		 125 00 S3 THE FORWARD FIELD OF VISION Definition of a new area."S".
PAGETOP

Table of amended regulations (August 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Adopted
proposal
regarding
UN regulation.		 4 00 S15 REAR REGISTRATION PLATE LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
2 Adopted
proposal
regarding
UN regulation.		 6 01 S20 DIRECTION INDICATORS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
01 S18
/C2		 Error correction.
Agreement
regarding
UN regulation		 6 01 S18 DIRECTION INDICATORS Visibility angle requirements toward inside and below the horizontal for direction indicator lamps shall be moderated.
01 S18
/C1		 Error correction.
3 Adopted
proposal
regarding
UN regulation.		 7 02 S12
/C3		 FRONT AND REAR POSITION(SIDE)LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Error correction.
4 Adopted
proposal
regarding
UN regulation.		 10 03 S1 RADIO INTERFERENCE SUPPRESSION The temporary regulation which is valid till 4. November 2008 shall be deleted.
03 C1 Error correction.
Error correction.
5 Adopted
proposal
regarding
UN regulation.		 13-H 00 S10 BRAKING (M1) Error correction.
Clarification of requirements for activation and de-activation of emergency braking signal.
6 Adopted
proposal
regarding
UN regulation.		 23 00 S16 REVERSING LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
7 Adopted
proposal
regarding
UN regulation.		 27   C1 WARNING TRIANGLES Error correction.
8 Adopted
proposal
regarding
UN regulation.		 38 00 S15 REAR FOG LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
9 Adopted
proposal
regarding
UN regulation.		 48 03 S5 INSTALLATION OF LIGHTS Introduction of exemption rule in case contour marking cannot be installed, associated with additional prescription on notification by the Technical Service for exemption.
Adopted
proposal
regarding
UN regulation.		 04 S4
/C1		 Error correction.
Adopted
proposal
regarding
UN regulation.		 04 S3
/C1		 Error correction.
Adopted
proposal
regarding
UN regulation.		 R5 C2 Error correction.
10 Adopted
proposal
regarding
UN regulation.		 49 05 S2
/C1		 DIESEL EMISSION Error correction.
Adopted
proposal
regarding
UN regulation.		 05 S3 Harmonization with ECE R83 regarding vehicles named in application extent. Notification that R49 shall be applied to vehicles with a reference mass exceeding 2610kg.
Agreement
regarding
UN regulation		 49 05 S1 DIESEL EMISSION Consideration of gtr. 10 (OCE).
11 Adopted
proposal
regarding
UN regulation.		 50 00 S13 LIGHTS (MOPED, MOTOR CYCLE) Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
12 Adopted
proposal
regarding
UN regulation.		 77 00 S13 PARKING LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
13 Adopted
proposal
regarding
UN regulation.		 91 00 S12 SIDE-MARKER LAMPS -Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
-Addition of a column to application document to enter if the mounting height is equal to, or less than 750mm, etc.
14 Adopted
proposal
regarding
UN regulation.		 100 01   BATTERY ELECTRIC VEHICLES -the scope shall be extended so that the regulation applies to vehicles of M- and N-category including those driven by hybrid, hydrogen cell and petroleum cell power trains.
-Requirements regarding protection against direct contact, isolation resistance, function items, etc., have totally been revised.
15 Adopted
proposal
regarding
UN regulation.		 104 00 S3
/C2		 RETRO-REFLECTIVE MARKINGSFOR HEAVY AND LONG VEHICLES Error correction.
18 Agreement
regarding UN regulation		 108 00 S3 RETREADED PNEUMATIC TYRE （MOTOR VEHICLE） Clarification of the scope.
16 Adopted
proposal
regarding
UN regulation.		 112 01   HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Lighting voltage of lamp at the type approval test shall be regulated so that the reference luminous flux at 13.2V may be obtained, instead of the current 12v.
00 S8
/C3		 Error correction.
17 Adopted
proposal
regarding
UN regulation.		 119 00 S5 CORNERING LAMPS Clarification: A light source module shall be so designed that it must not mechanically be interchangeable with any replaceable light source.
19 Agreement
regarding UN regulation		 121 00 C5 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS,TELL-TALES AND INDICATORS Error correction.
20 Adopted
proposal
regarding
UN regulation.		 123 01   AFS Lighting voltage of lamp at the type approval test shall be regulated so that the reference luminous flux at 13.2V may be obtained, instead of the current 12v.
PAGETOP

Table of amended regulations (July 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 12 R3 C2 STEERING MECHANISM Error correction.
R3 C3 Error correction.
2 Agreement
regarding
UN regulation		 16 06 C1 SAFETY BELTS Error correction.
R6 C1 Error correction.
  erratum Error correction.
3 Agreement
regarding UN regulation		 19 03 C4 FRONT FOG LAMPS Error correction.
4 Adopted
proposal
regarding
UN regulation.		 19 04   FRONT FOG LAMPS Lighting voltage of lamp at the type approval test shall be changed to 13.2V.
03 C5 Error correction.
5 Agreement
regarding UN regulation		 30 02 S16 PNEUMATIC TYRES (PASSENGER VEHICLE) Clarification of the scope.
6 Agreement
regarding UN regulation		 44 R2 C3 CHILD RESTRAINT SYSTEMS Error correction.
7 Agreement
regarding UN regulation		 45 01 S6 HEADLAMPS CLEANERS Revision of terms in accordance with other regulations regarding headlamp.
01 S6/C1 Error correction.
8 Agreement
regarding
UN regulation		 53 01 S10 INSTALLATION OF LIGHTS (MOTOR CYCLE) Requirements for vertical inclination of front headlamp with gas-discharge light sources shall be prescribed. In case a levelling device is installed, its operation shall be automatic.
Optional installation of DRL shall be allowed. In case of installation it shall automatically be on as soon as engine is started, and automatically be off when headlamp is on, etc.
01 S10/C1 Error correction.
9 Adopted
proposal
regarding
UN regulation.		 53 01 S11 INSTALLATION OF LIGHTS (MOTOR CYCLE) Headlamp with HIAS shall be allowed.
In the case of 2 DRL the distance separating the illuminating surfaces shall be changed so that they shall not exceed 420mm.
10 Agreement
regarding UN regulation		 54 00 S17 PNEUMATIC TYRES(COMMERCIAL VEHICLE) Clarification of the scope.
11 Agreement
regarding UN regulation		 55 01 S1 MECHANICAL COUPLING Addition of alternative test procedure regarding mechanical coupling,
12 Agreement
regarding UN regulation		 83 05 S9 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS -Addition of emission test procedure of vehicles equipped with more than one periodically regenerating systems.
-Amendment regarding calculation method of Ki-factor of a single periodically regenerating system.
13 Agreement
regarding UN regulation		 98 00 S10/C1 GAS-DISCHARGE HEADLAMPS Error correction.
00 S12 -The maximum illuminance of driving beam shall be increased.
-Terms regarding principal passing beam shall be presented.
-Clarification of the requirement that gas-discharge light sources used for gas-discharge headlamps shall be replaceable.
14 Adopted
proposal
regarding
UN regulation.		 98 01   GAS-DISCHARGE HEADLAMPS Error correction.
01   Lighting voltage of lamp at the type approval test shall be changed to 13.2V.
15 Agreement
regarding UN regulation		 105 04 S11 THE CARRIAGE OF DANGEROUS GOODS WITH REGARD TO THEIR SPECIFIC CONSTRUCTIONAL FEATURES MEMU (vehicles for transporting explosives) shall be named in the requirements list.
16 Agreement
regarding UN regulation		 122   amendment1-erratum HEATING SYSTEM Error correction.
PAGETOP

Table of amended regulations (June 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 16 05 S2 SAFETY BELTS  The application extent of ISOFIX anchorage systems shall be enlarged.
06   Deletion of foldable seats and Class II from the list of items which shall be exempted from application of requirements for installation in a vehicle.
2 Agreement
regarding UN regulation		 46 02 S4
/C1		 REAR-VIEW MIRRORS Error correction.
3 Adopted
proposal
regarding
UN regulation.		 49 05 S2 Diesel Emission  Contents of revision of gtr4(WHDC) shall be reflected.
05 S3 Addition of provisions for ON-BOARD DIAGNOSTIC SYSTEMS (OBD) regarding gaseous fuelled engines.
4 Agreement
regarding UN regulation		 54 R2/C3   PNEUMATIC TYRES
(COMMERCIAL VEHICLE)		 Error correction.
5 Agreement
regarding UN regulation		 70 01 S7 REAR MARKING PLATES FOR HEAVY AND LONG VEHICLES A revision to gather requirements for colorimetric characteristics with regard to retro-reflecting devices and their materials under R48.
6 Agreement
regarding UN regulation		 87 Erratum   DAYTIME RUNNING LAMPS Error correction.
7 Agreement
regarding UN regulation		 90 01 S11 REPLACEMENT BRAKE LINING ASSEMBLIES Addition of provisions on the replacement brake lining assemblies used for separate parking brake systems being independent of the vehicle service brake system.
8 Agreement
regarding UN regulation		 107 R2/C1   Double-Deck Large Passenger Vehicles with Regard to their General Construction Error correction.
9 Agreement
regarding UN regulation		 113 00 S8 HEADLAMPS
(WITH A SYMMETRICAL PASSING BEAM)
  1. Addition of a centre of reference mark to passing beam and driving beam.
  2. Addition of voltage markings.
  3. Addition of Class E lamps (with gas-discharge light sources).
10 Adopted
proposal
regarding
UN regulation.		 115   S4 LPG/CNG Retrofit System Revision of test method on LPG and CNG retrofit systems..
11 Agreement
regarding UN regulation		 121 00 S3 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS, TELL-TALES AND INDICATORS Addition of English texts "START" and "STOP" to markings for engine start and stop control functions. These texts may be used in combination with the current symbols.
PAGETOP

Table of amended regulations (May 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 3 02 S11 REFLEX REFLECTORS A revision to gather requirements for colorimetric characteristics with regard to retro-reflecting devices and their materials under R48.
2 Agreement
regarding UN regulation		 27 03 S2 WARNING TRIANGLES
  1. Insersion of a regulation to be referred to with regard to the definition of colours of reflected/fluorescent light.
  2. Insertion of a regulation to be referred to with regard to the limits of the trichromatic co-ordinates of the red reflected luminous flux in case of a colourless surface reflection.
  3. Change of the regulation to be referred to with regard to the limits of the trichromatic co-ordinates.
3 Adopted
proposal
regarding
UN regulation.		 37   R5
/C1		 Filament Lamps Error correction.
03 S34
  • The measuring method of bulb colour, too, shall be clarified. Accordingly, remarks shall be added to The communication form and COP requirements shall be changed.
  • New bulbs shall be added.
4 Adopted
proposal
regarding
UN regulation.		 64 02   Temporary-Use Spare Wheels/Tyres and Run Flat Tyres Addition of requirements for TPMS(tyre pressure monitoring systems).
02   Error correction.
02   Error correction.
02   Error correction.
5 Agreement
regarding UN regulation		 87 00 S14 DAYTIME RUNNING LAMPS L-category shall be added to the categories of vehicle to be equipped with DRL(daytime running light).
6 Agreement
and
the final draft
regarding
UN regulation		 98 00 S9
/C1		 Gas-Discharge Headlamps Error correction.
00 S11 Addition of a footnote that instructions with regard to installation of lamps which meet the requirements of traffic moving on both left and right sides are given in R48.
00 S9
/C2		 Error correction.
  S10
/C1		 Error correction.
  S13
  • Clarification of time required for aging.
  • It shall be clearly described that lamps only for passing use shall be exempted from the test.
  • Lighting voltage shall be prescribed for each light source category.
7 Agreement
regarding UN regulation		 112 00 S10 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Addition of a footnote that instructions with regard to installation of lamps which meet the requirements of traffic moving on both left and right sides are given in R48.
8 Adopted
proposal
regarding
UN regulation.		 113   S9 Headlamps (with a Symmetrical Passing Beam)
  • Clarification of time required for aging.
  • Lighting voltage shall be prescribed for each light source category.
PAGETOP

Table of amended regulations (Apr. 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 46 02 S4 Rear-View Mirrors Addition of Class VII mirror.
2 Adopted
proposal
regarding
UN regulation.		 46 02 S4
/C1		 Error correction.
3 Adopted
proposal
regarding
UN regulation.		 48   R5
/C1		 Installation of Lights Error correction.
04

S2
/C1

 Error correction.
04 S4
  • Mitigation of conditions regarding the fitting height of reflectors and side reflectors.
  • Permission of fitting side direction indicator lamps of Category 5, or Category 6 to vehicles of which overall length exceeds 9m.
  • Mitigation of fitting conditions of side direction indicator lamps and side markers to passenger vehicles of which length is not less than 6m, nor more than 7m.
  • Mitigation of fitting conditions of cornering lamps.
  • Mitigation of distance conditions regarding minimum adjacent distance requirements for fitting retro-reflectors.
  • Addition of understanding of light emitting surface, illuminating surface, etc.
4 The final
document of
UN regulation		 48   * Revision regarding light emitting surface and illuminating surface.
5 Adopted
proposal
regarding
UN regulation.		 53 01 S10
/C1		 Installation of Lights (Motor Cycle) Error correction.
6 Adopted
proposal
regarding
UN regulation.		 66 02   Strength of Super Structure (Large Passenger Vehicle)
  • Revision of the whole sentences.
  • Addition of single deck rigid, or articulated vehicles having more than 16 passengers to the scope.
  • Addition of definition.
  • Addition of transitional rules.
  • Revision of Appendices 1, 3, 5, 6 and 7.
7 Adopted
proposal
regarding
UN regulation.		 67 01 S9 Specific Equipment of Vehicles Using LPG M1 vehicles exceeding 3.5t shall be renamed M1 SA(motor caravans).
8 Adopted
proposal
regarding
UN regulation.		 87   R2
/C1		 Daytime Running Lamps Error correction.
9 Adopted
proposal
regarding
UN regulation.		 99   S5 Gas-Discharge Light Sources According to introduction of the Class F3 for front fog lamp, selective yellow colour shall be reintroduced.
10 Agreement
regarding UN regulation		 101 00 S8 Emission of Carbon Dioxide and Fuel Consumption (Passenger Car)
  • Definition of "OVC range" shall be added.
  • Petrol E5 and diesel fuel B5 shall be added to fuels for reference fuel test.
11 Adopted
proposal
regarding
UN regulation.		 101   S9 Addition of emission test procedure on vehicles equipped with more than one periodically regenerating systems.
12 Adopted
proposal
regarding
UN regulation.		 107   R2
/C1		 Double-Deck Large Passenger Vehicles with Regard to their General Construction Error correction.
03   Addition of transitional rules regarding 03 series.
13 Agreement
regarding UN regulation		 107 02 S3
  • Mitigation of restriction on fuse capacity.
  • Indication of allowable capacity regarding passengers and luggage.
  • Location of opening device for an emergency door.
02 S4
  • Definition of a gangway.
  • Modification of the figure of gangway space.
  • A revision clarifying that emergency exits in excess of the required minimum number need not be substantially balanced on each of the left and right sides.
02 S5
  • Clarification of driver protection measures and dimensions of driver's seat.
  • Addition of transitional rules.
14 Adopted
proposal
regarding
UN regulation.		 110   S9 Vehicles Using CNG A revision to refer to ISO regarding the shape of fuel inlet of vehicles powered by CNG.
15 Adopted
proposal
regarding
UN regulation.		 121   C5 The Location and Identification of Hand Controls, Tell-Tales and Indicators Error correction.
16 Adopted
proposal
regarding
UN regulation.		 125   S2 The Forward Field of Vision Clarification of the definition of place of steering wheel, if adjustable, when measuring field of vision.
(*Note by the secretariat)
PAGETOP

Table of amended regulations (Mar. 2010).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 6 01 S19 Direction Indicators For simplification of light distribution requirements, the same requirements shall be applied throughout one category of device, regardless of the number of light source(s) used.
01 S18/C1 Error correction.
2 Adopted
proposal
regarding
UN regulation.		 7 02 S16 Front and Rear Position (Side) Lamps, Stop Lamps and End-Outline Marker Lamps For simplification of light distribution requirements, the same requirements shall be applied throughout one category of device, regardless of the number of light source(s) used.
3 Agreement
regarding UN regulation		 11 03 S1 Door Latches and Hinges Extension of application to doors to be opened vertically and clarification of test methods accordingly.
03 S1/C1 Error correction.
4 Adopted
proposal
regarding
UN regulation.		 12   R3/C3 Steering Mechanism Error correction.
5 Agreement
regarding UN regulation		 13 11 C2 Braking Error correction.
6 Agreement
regarding UN regulation		 13H 00 S7 Braking (M1) Reflecting the gtr8(ESCgtr) effected in the year 2008, requirements for ESC shall be added.
00 S8 Amendment to apply R64 for vehicles using temporary-use spare wheels/tyres.
  R1/C1 Error correction.
  S7/C1 Error correction.
7 Agreement
regarding UN regulation		 14 06 S3 Safety Belt Anchorages Change of scope.
06 S5 Application extent of ISOFIX anchorage system shall be enlarged.
07   Deletion of the issue regarding foldable seat. Deletion of Class II from target categories. Addition of rules for transitional phase.
8 Adopted
proposal
regarding
UN regulation.		 14 07 S1 A revision to adjust requirements for equipment of ISOFIX anchorage within the Regulation No. 14.
9 Adopted
proposal
regarding
UN regulation.		 16   R6/C1 Safety Belts Error correction.
10 Agreement
regarding UN regulation		 17 08   Seats Deletion of the issue regarding foldable seat. Installation of side-facing seats shall be prohibited in M1, N1, M2 and M3.
11 Adopted
proposal
regarding
UN regulation.		 19 03 C4 Front Fog Lamps Error correction.
03 S2 A revision to have lighting voltage requirements put together for each light source group.
12 Agreement
regarding UN regulation		 37 03 S32 Filament Lamps Inclusion of bulbs for signalling lights.
03 S33 Application of new bulbs.
13 Agreement
regarding UN regulation		 43 00 S11 Uniform Provisions Concerning the Approval of Safety Glazing Materials The lower limit of the regular light transmittance of windscreen shall be changed to 70%.
00 S12
  • Addition of approval mark examples for laminated glass panels other than windscreens.
  • Light transmission measurement test shall be introduced in examination procedure of COP (conformity of production).
14 Adopted
proposal
regarding
UN regulation.		 44   R2/C3 Child Restraint Systems Error correction.
15 Adopted
proposal
regarding
UN regulation.		 45 01 S6/C1 Headlamp Cleaners Error correction.
16 Agreement
regarding UN regulation		 83 05 S8 The Emission of Pollutants According to Engine Fuel Requirements
  • -Contents shall be added to specifications of reference fuel.
    -Items of gaseous pollutants shall be added.
  • Definition of fuel requirements by the engine shall be added.
    -Test requirements of pollutants shall be changed.
  • Measurement procedure of air velocity for selection of blower.
  • Obtaining procedure of the product of volumetric concentration and volume of gaseous and particulate pollutants.
  • General formula for the dilution factor regarding the reference fuel which is composed of CxHyOz.
  • Petrol(E5) shall be added as alternative of unleaded petrol(E0) for the type test 1 of reference fuel. Diesel fuel(B5) shall be added as alternative of (B0). Petrol(E5) shall be added as alternative of unleaded petrol(E0) for the type test V.
  • Type 1 test methods shall be added.
17 Agreement
regarding UN regulation		 110 00 S8 Vehicles Using CNG
  • -Clarification of the definition of pressure relief valve（PRD）.
  • Addition of requirements for working temperature and working pressure for PRD to ANNEX.
  • Regarding test methods, the following requirements shall be prescribed: temperature(82℃、57℃）, working pressure to be changed from 10% to 100% and cycle tests to be conducted for 2000 cycles at ambient temperature 82℃ and 18000 cycles at 57℃.
  • After the test, the leakage shall be less than, or equal to 15cm3/h, and working pressure of PRD shall be 34Mpa±10%.
18 Adopted
proposal
regarding
UN regulation.		 112   S12 Headlamps (with an Asymmetrical Passing Beam) A revision to have lighting voltage requirements put together for each light source group.
19 Agreement
regarding UN regulation		 119 00 S4 Cornering Lamps Admission of lamps with an electronic light source control gear.
20 Agreement
regarding UN regulation		 122 00 S1 Heating System MEMU(vehicles for transportation of explosives) shall be added to targets of requirements.
21 Adopted
proposal
regarding
UN regulation.		 123   S4 AFS A revision to have lighting voltage requirements put together for each light source group.
PAGETOP

Table of amended regulations (Nov. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 111   Erratum ROLLOVER STABILITY (TANK VEHICLES OF CATEGORIES N AND O) Error correction.
PAGETOP

Table of amended regulations (Oct. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 13   R6
/C2		 Braking Error correction.
11 C2 Error correction.
11 S3 The definition of vehicle stability function shall be given a new expression.
2 Adopted
proposal
regarding
UN regulation.		 37 03 S32
/C1		 Filament Lamps Error correction.
03 S33
/C1		 Error correction.
3 Adopted
proposal
regarding
UN regulation.		 49 06 S1 Diesel Emission Consideration of gtr. 10 (OCE).
4 Adopted
proposal
regarding
UN regulation.		 55 01 S1 Mechanical Coupling Addition of alternative test procedure on mechanical coupling.
5 Adopted
proposal
regarding
UN regulation.		 83 05 S9 The Emission of Pollutants According to Engine Fuel Requirements
  • Addition of emission test procedure on a vehicle equipped with more than one periodically regenerating system.
  • Revision of Ki determination procedure related to a vehicle equipped with a periodically regenerating system.
6 Adopted
proposal
regarding
UN regulation.		 85   S5 Measurement of Engine Power In order to simplify the ECE-Regulation, Directive 80/1269/EEC shall be abolished through unification with R85.
  • Addition of prescription that both naturally aspirated and supercharged engines are targeted at.
  • Addition of definitions regarding "maximum net power" as well as "standard-production equipment".
  • Addition of a rule regarding application for approval of a vehicle.
  • Revision of standard temperatures for Wobbe index of natural gas to be used as test fuel.
  • Addition of prescription that positive ignition engines of vehicles that can run either on petrol, or on a gaseous fuel, shall be tested with both fuels.
  • Maximum net power shall be determined by the average value of measurements that shall be carried out twice.
  • Adjustment of items to be stated in application documents with the EC-directive.
  S5 Error correction regarding ECE/TRANS/WP.29/2009/58.
PAGETOP

Table of amended regulations (Sep. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 11 03 S2 Door Latches and Hinges Application extent shall be widened to include doors that open in a vertical direction and relevant test methods shall be clearly prescribed.
2 Adopted
proposal
regarding
UN regulation.		 12   R3/C2 Steering Mechanism Error correction.
3 Adopted
proposal
regarding
UN regulation.		 13H   R1/C1 Braking (M1) Error correction.
  S7/C1 Error correction.
  S9 Addition of definition, test methods, technical requirements, data processing methods, etc., regarding vehicles equipped with BAS.
4 Agreement
regarding UN regulation		 16 05 S1 SAFETY BELTS Revision of test methods on safety belt strap.
Adopted
proposal
regarding
UN regulation.		 06 C1 Error correction.
5 Adopted
proposal
regarding
UN regulation.		 30 02 S16 Pneumatic Tyres (Passenger Vehicle Clarification of scope.
6 Adopted
proposal
regarding
UN regulation.		 32   R1/C1 Rear-end Collision Error correction.
7 Adopted
proposal
regarding
UN regulation.		 33   R1/C1 Head-on Collision Error correction.
  R1/C1 Error correction.
8 Adopted
proposal
regarding
UN regulation.		 54   S17 Pneumatic Tyres (Commercial Vehicle） Clarification of scope.
9 Adopted
proposal
regarding
UN regulation.		 94   R1/C1 Protection of the Occupants in the Event of a Frontal Collision Error correction.
10 Adopted
proposal
regarding
UN regulation.		 108   S3 Retreaded Pneumatic Tyres (Motor Vehicle) Clarification of scope.
11 Adopted
proposal
regarding
UN regulation.		 109   S6 Retreaded Pneumatic Tyres (Commercial Vehicle) Clarification of scope.
PAGETOP

Table of amended regulations (Aug. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 6 01 S16/C1 Direction Indicators Error correction.
2 Agreement
regarding UN regulation		 7 02 S12/C2 Front and Rear Position (Side) Lamps, Stop Lamps and End-Outline Marker Lamps Error correction.
3 Agreement
regarding UN regulation		 13   R6/C1 Braking Error correction.
4 Agreement
regarding UN regulation		 19 03 C3 Front Fog Lamps Error correction.
5 Agreement
regarding
UN regulation		 31  02 S7 HALOGEN SEALED BEAM HEADLAMPS  The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
  R2-
Erratum		 Error correction.
6 Adopted
proposal
regarding
UN regulation.		 34 02 S3 PREVENTION OF FIRE RISKS A revision to facilitate approval when adding volume variation, or increasing liquid fuel tank series.   
7 Agreement
regarding UN regulation		 38 00 S12/C1 Rear Fog Lamps Error correction.
8 Agreement
regarding UN regulation		 44   R2/C2 Child Restraint Systems Error correction.
9 Agreement
regarding UN regulation		 45 01 S4/03 Headlamp Cleaners Error correction.
10 Agreement
regarding UN regulation		 107 02 S2 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION Addition of rules regarding opening and closing of emergency doors.
11 Adopted
proposal
regarding
UN regulation. 		 107   02 S4 CATEGORY M2 OR M4 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION  
  • Definition of "gangway".
  • Revision of the figure showing the space of gangway.
  • A revision to clarify that emergency exits other than mandatory ones may be provided anywhere.
02 S4 Error correction.
02 S5
  • Clarification of measures to protect a driver and driver's compartment dimensions.
  • Addition of rules for transitional phase.
12 Agreement
regarding UN regulation		 117 01 C3 The Approval of Tyres with Regard to Rolling Sound Emissions Error correction.
13 Agreement
regarding UN regulation		 123 00 C2 AFS Error correction.
PAGETOP

Table of amended regulations (July. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 13   e BRAKING Error correction.
11 used
  • Clarification of understanding with regard to the approval of trailer axles.
  • An amendment to adjust residual braking performance in case ABS of trailer fails with that in case control current transmission fails.
2 Adopted
proposal
regarding
UN regulation.		 37 03 S33 FILAMENT LAMPS Adoption of new bulbs.
03 S33
Error correction.
3 Adopted
proposal
regarding
UN regulation.		 43 00 S12 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SAFETY GLAZING MATERIALS
  • An approval marking to be affixed to a laminated glass pane other than a windscreen shall be added.
  • Light transmission measurement test shall be adopted to examination procedure of COP (conformity of production).
4 50 00 R2-Erratum-Revision1 LIGHTS (MOPED, MOTOR CYCLE) Error correction.
5 Adopted
proposal
regarding
UN regulation.		 53 01 S10 INSTALLATION OF LIGHTS (MOTOR CYCLE) A headlamp with gas-discharged light source shall be allowed, on the condition that it is provided with automatic levelling device for installation.
S10 Optional installation of DRL shall be admitted. When installed, DRL shall be automatically switched on with the start of engine and switched off with switching the headlamp on, etc.
6 Agreement
regarding
UN regulation		 83 05 S7 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS Addition of particle number measurement method to PMP measurement.
7 Adopted
proposal
regarding
UN regulation.		 87 00 S14 DAYTIME RUNNING LAMPS Addition of category L to vehicle categories in which DRL shall be installed.
8 Agreement
regarding
UN regulation		 90 01 S10 REPLACEMENT BRAKE LINING ASSEMBLIES AND DRUM BRAKE LININGS Revision of description regarding representative vehicle and error correction.
S11 Addition of prescriptions to be applied for lining brake assemblies exclusively for parking brake system.
9 Agreement
regarding
UN regulation		 99 00 S4 GAS-DISCHARGE LIGHT SOURCES The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
10 Adopted
proposal
regarding
UN regulation.		 109 00 S5 RETREADED PNEUMATIC TYRES (COMMERCIAL VEHICLE)
  • Addition of definition.
  • Rules for inspection method shall be revised.
  • Approval of tyres which have ASP (additional side wall protective rubber layer) shall be allowable.
11 Adopted
proposal
regarding
UN regulation.		 117 01 C3 THE APPROVAL OF TYRES WITH REGARD TO ROLLING SOUND EMISSIONS Error correction.
12 Adopted
proposal
regarding
UN regulation.		 121 00 S3 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS, TELL-TALES AND INDICATORS Alphabetic expressions "START" and "STOP" for symbolizing start and stop control of engine shall be added and a marking shall be allowed which consists in their combination with the current symbol.
PAGETOP

Table of amended regulations (Jun. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 3 02 S11 REFLEX REFLECTORS A revision to gather rules regarding the colour of reflectors and their material to R48.
2 Adopted
proposal
regarding
UN regulation.		 6 01 S16/C1 DIRECTION INDICATORS Error correction.
S18 The visibility angle requirements for the front direction indicator lamps shall be lightened below the horizontal and inside the reference axis.
3 Adopted
proposal
regarding
UN regulation.		 7 02 S12/C2 FRONT AND REAR POSITION (SIDE) LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Error correction.
S15 The visibility angle requirements for the front position lamps shall be lightened below the horizontal and inside the reference axis.
4 Adopted
proposal
regarding
UN regulation.		 13-H 00 S8 BRAKING (M1) A revision to make vehicles equipped with temporary-use tyres/wheels meet R64.
5 Agreement
regarding
UN regulation		 14 06 S4 SAFETY BELT ANCHORAGES Revision of static test requirements on ISOFIX anchorages.
6 Adopted
proposal
regarding
UN regulation.		 45 01 S4/C3 HEADLAMPS CLEANERS Error correction.
01 S6 Revision of terms for adjustment with other regulations regarding headlamps.
7 Adopted
proposal
regarding
UN regulation.		 48 04 S3 INSTALLATION OF LIGHTS
  • Correction of definition regarding independent, grouped, combined and reciprocally incorporated lamps.
  • Clarification of treatment of non-textured lenses.
  • Adoption of collective definition regarding colours of reflectors.
  • Lightening the switching requirements for position lamps.
  • Addition of limitation to the voltage of electric power supplied to lamps by vehicle.
  • The maximum luminous intensity of driving beam in R98 shall be intensified.
  • The visibility angle requirements for the front direction indicator lamps and the front position lamps shall be lightened below the horizontal and inside the reference axis.
  • Mounting requirements for retro-reflectors shall be lightened.
8 Agreement
regarding
UN regulation		 50 00 S12 LIGHTS (MOPED, MOTOR CYCLE) A totally revised version including supplements from No. 8 to 12.
  R2-Erratum Error correction.
9 The final draft
and
agreement
regarding
UN regulation		 70 01 S6 REAR MARKING PLATES FOR HEAVY AND LONG VEHICLES A totally revised version including supplements till No. 6 of series 01.
S7 A revision to gather rules regarding the colour of reflectors and their material to R48.
10 Adopted
proposal
regarding
UN regulation.		 75 00 S13 PNEUMATIC TYRES (MOPED, MOTOR CYCLE) Addition of new sizes.
11 Agreement
regarding
UN regulation		 78 03 S1 BRAKING (CATEGORY L) Revision of rules regarding PBC as well as conditions on anti-lock devices.
12 Adopted
proposal
regarding
UN regulation.		 98 00 S9/C2 GAS-DISCHARGE HEADLAMPS Error correction.
S12
  • The maximum luminous intensity of driving beam in R98 shall be intensified.
  • Inclusion of terms regarding principal passing beam.
  • Clarification that gas-discharge light source(s) used in gas-discharge headlamps shall be replaceable.
13 Adopted
proposal
regarding
UN regulation.		 112 00 S8/C2 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Error correction.
S11 Inclusion of terms regarding principal passing beam.
14 The final draft
and
agreement
regarding
UN regulation		 123 00 C2 AFS Error correction.
00 S3 A revision to enable usage of LED module(s).
PAGETOP

Table of amended regulations (May 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 11 03 S1/C1 DOOR LATCHES & HINGES Prescribing how to mount test fixture with latch and striker in test machine.
2 Adopted
proposal
regarding
UN regulation.		 19 03 C3 FRONT FOG LAMPS
  1. Requirement for a lamp with LED module(s) to bear a marking with certain contents.
  2. Requirement of marking for the case that a light source control gear is used, which is not part of the LED module.
  3. Correction of requirements for luminous intensity.
3 Adopted
proposal
regarding
UN regulation.		 27 03 S2 WARNING TRIANGLES
  1. Naming a reference regulation regarding the definitions of colour of reflected/fluorescent light of the device.
  2. Naming a reference regulation regarding the limits of the trichromatic co-ordinates of the red reflected luminous flux in case of colourless surface reflection.
  3. Replacing the reference regulation regarding the limits of trichromatic co-ordinates with another one.
4 Adopted
proposal
regarding
UN regulation.		 38 00 S12/C1 REAR FOG LAMPS Addition of a luminous intensity category F in parallel to F1.
5 Adopted
proposal
regarding
UN regulation.		 44   R2/C2 CHILD RESTRAINT SYSTEMS Revision of dimensions of forward facing child restraints.
6 Agreement
regarding
UN regulation		 49 05   DIESEL EMISSION
  1. Durability of aftertreatment system.
  2. In-service conformity.
  3. OBD.
  4. Assurance of Nox control measures.
  5. Adjusting gtr4 (WHDC) with gtr5 (OBD).
  R4-Erratum   Error correction.
7 Adopted
proposal
regarding
UN regulation.		 83 05 S8 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS
  1. Enrichment of specification contents of reference fuel.
  2. Addition of categories of gaseous pollutants.
  3. Addition of definitions of requirements for fuels according to engine types.
  4. Amendment of test requirements of pollutants.
  5. Air velocity measurement procedure for selecting a blower.
  6. Determination procedure of the product of volumetric concentration and volume of gaseous/particulate pollutants.
  7. Dilution factor for each reference fuel and the general formula for fuels composed of CxHyOz.
  8. For Type I test, addition of: petrol (E5) as substitute for unleaded petrol (E0) and diesel fuel (B5) as substitute for B5. For Type Vi test, addition of E5 as substitute for unleaded petrol (E0).
  9. Addition of Type I test procedure.
8 Adopted
proposal
regarding
UN regulation.		 101 00 S8 EMISSION OF CARBON DIOXIDE AND FUEL CONSUMPTION (PASSENGER CAR)
  1. Addition of definition of "OVC range".
  2. Addition of petrol E5 and diesel B5 to fuels used for reference fuel test.
9 Adopted
proposal
regarding
UN regulation.		 104 00 S6 RETRO-REFLECTIVE MARKINGS FOR HEAVY AND LONG VEHICLES
  1. Addition of definitions of "colour of the reflected light of the device".
  2. Change of entrance angle in case colourless surface reflection is produced, and naming a reference regulation.
  3. The colours of the exposed specimen shall still meet the specified requirements.
10 Adopted
proposal
regarding
UN regulation.		 113 00 S8 HEADLAMPS (WITH A SYMMETRICAL PASSING BEAM)
  1. Addition of a centre of reference mark to passing beam and driving beam.
  2. Addition of voltage markings.
  3. Addition of Class E lamps (with gas-discharge light sources).
11 Agreement
regarding UN regulation		 124   R2-Erratum WHEELS FOR PASSENGER CARS Error correction.
PAGETOP

Table of amended regulations (Apr. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 13-H 00 S7 BRAKING (M1) Addition of requirements for ESC which reflect gtr8 (ESCgtr) effected in 2008.
2 Agreement
regarding
UN regulation		 16 05 R5
-C1		 SAFETY BELTS Error correction.
3 Agreement
regarding
UN regulation		 19 03 C2 FRONT FOG LAMPS Error correction.
4 Agreement
regarding
UN regulation		 25   R1
-C2		 HEAD RESTRAINTS Error correction.
5 Agreement
regarding
UN regulation		 44   R2
-C1		 CHILD RESTRAINT SYSTEMS Error correction.
6 Agreement
regarding
UN regulation		 46 02 C2 REAR-VIEW MIRRORS Error correction.
7 Agreement
regarding
UN regulation		 80 01 C1 SEAT (LARGE PASSENGER VEHICLE) Error correction.
PAGETOP

Table of amended regulations (Mar. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Adopted
proposal
regarding
UN regulation.		 11 03 S1 DOOR LATCHES & HINGES Clarification of sentences and elongation of time within which measurement takes place.
2 Adopted
proposal
regarding
UN regulation.		 13 11 S1 BRAKING Addition of the content defined in the amendment of ISO 11992.
11 S1
Addendum		 Addition of the content defined in the amendment of ISO 11992.
3 Adopted
proposal
regarding
UN regulation.		 14 06 S5 SAFETY BELT ANCHORAGES Application extent of ISOFIX anchorage systems shall be enlarged.
07   Deletion of items regarding foldable seats, deletion of Class II from application categories and addition of transitional rules.
4 Adopted
proposal
regarding
UN regulation.		 16   R5-C1 SAFETY BELTS Error correction.
05 S2 Application extent of ISOFIX anchorage systems shall be enlarged.
06   Deletion of items regarding foldable seats, deletion of Class II from application categories and addition of transitional rules.
06 Amend 1 Deletion of items regarding foldable seats, deletion of Class II from application categories and addition of transitional rules.
5 Adopted
proposal
regarding
UN regulation.		 17 08   SEATS Deletion of items regarding foldable seats and prohibition of providing vehicles of categories M1, N1 and M3 with seats facing the side.
6 Adopted
proposal
regarding
UN regulation.		 19 03 C2 FRONT FOG LAMPS Error correction.
7 Adopted
proposal
regarding
UN regulation.		 25   R1-C2 HEAD RESTRAINTS Error correction.
8 Adopted
proposal
regarding
UN regulation.		 37 03 S32 FILAMENT LAMPS Introduction of bulbs for signalling lights.
9 Adopted
proposal
regarding
UN regulation.		 43 00 S11 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF SAFETY GLAZING MATERIALS The lower limit of regular light transmittance for windscreens shall be changed to 70%.
10 Adopted
proposal
regarding
UN regulation.		 44   R2-C1 CHILD RESTRAINT SYSTEMS Error correction.
11 Adopted
proposal
regarding
UN regulation.		 46 02 C2 REAR-VIEW MIRRORS Error correction.
S4 Addition of a mirror of Class VII.
12 Agreement
regarding
UN regulation		 48 04 - INSTALLATION OF LIGHTS -Deletion of Class A from R112.
-Mandatory requirement of day time running light. However, DRL shall be prohibited in countries which have not adopted R87.
-
C1 Error correction.
S1 Definition of the chromaticity areas. Addition of definition of the overall length.
S1/C1 Error correction.
  Erratum Error correction.
Adopted
proposal
regarding
UN regulation.		   R4-C1 Error correction.
04 S2 Addition of requirements for exterior courtesy lamp. Revision of rules regarding location of DRL in transverse direction and requirements for lighting of DRL..
13 Adopted
proposal
regarding
UN regulation.		 74 01 S6 INSTALLATION OF LIGHTS (MOPED) This item is out of focus of JASIC/Working group.
14 Adopted
proposal
regarding
UN regulation.		 80 01 C1 SEAT
(LARGE PASSENGER VEHICLE)		 Error correction.
15 Adopted
proposal
regarding
UN regulation.		 98 00 S11 GAS-DISCHARGE HEADLAMPS Addition of a footnote that instructions on the installation of headlamps satisfying the so-called Dover-requirements are given in Regulation No. 48.
16 Adopted
proposal
regarding
UN regulation.		 99   R1-C1 GAS-DISCHARGE LIGHT SOURCES Error correction.
17 Adopted
proposal
regarding
UN regulation.		 105 04 S1 THE CARRIAGE OF DANGEROUS GOODS WITH REGARD TO THEIR SPECIFIC CONSTRUCTIONAL FEATURES Addition of MEMU (vehicles for transportation of explosive) to the requirements.
18 Adopted
proposal
regarding
UN regulation.		 107 03 S3 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION -Relaxation of capacity limit of fuses.
-Indication of seating capacity and permissible luggage weight.
Requirements regarding the location of control or device for opening an emergency door.
19 Adopted
proposal
regarding
UN regulation.		 110 00 S8 VEHICLES USING CNG -Clarification of definition of pressure relief devices (PRD).
-Addition of requirements regarding working temperature and activating pressure of PRD to ANNEX.
-Test methods: Cycle tests shall be conducted with temperature set at 82℃ and 57℃, pressure between 10 per cent and 100 per cent of the working pressure for 2,000 cycles at ambient temperature of 82℃ and 18,000 cycles at 57℃.
-At the completion of test leakage shall be less than 15cm3/h and burst pressure of PRD shall be 34Mpa±10 per cent.
20 Adopted
proposal
regarding
UN regulation.		 112 00 S10 HEADLAMPS
(WITH AN ASYMMETRICAL PASSING BEAM)		 Addition of a footnote that instructions on the installation of headlamps satisfying the so-called Dover-requirements are given in Regulation No. 48.
21 Adopted
proposal
regarding
UN regulation.		 119 00 S4 CORNERING LAMPS Admission of lighting systems that use an electronic light source control gear being part of the lamp.
22 Adopted
proposal
regarding
UN regulation.		 122 00 S1 HEATING SYSTEM Addition of MEMU (vehicles for transportation of explosive) to the requirements.
23 Agreement
regarding UN regulation		 126   Erratum PARTITIONING SYSTEM Error correction.
PAGETOP

Table of amended regulations (Feb. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 5 02 S7 SEALED BEAM HEADLAMPS The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
2 Agreement
regarding UN regulation		 6 01 R4/
Erratum		 DIRECTION INDICATORS Error correction.
3 Agreement
regarding UN regulation		 13 10 S5 BRAKING 1.Strengthening the lighting requirements regarding vehicles equipped with endurance braking system.
2.Revision of warning requirements for EPB.（Electric Parking Brake).
4 Agreement
regarding UN regulation		 23 00 S15 REVERSING LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
5 Agreement
regarding UN regulation		 37 03 S30 FILAMENT LAMPS Adoption of halogen bulb.
S31 1.Adoption of a halogen bulb H15.
2.The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
6 Agreement
regarding UN regulation		 38 00 S14 REAR FOG LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
7 Agreement
regarding UN regulation		 46 02 S3 REAR-VIEW MIRRORS 1.Definition of "surveillance camera-monitor-recording device".
2.Requirements limiting the projection of surveillance cameras and their shape.
8 Agreement
regarding UN regulation		 53 01 S9 INSTALLATION OF LIGHTS (MOTOR CYCLE) The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
9 Agreement
regarding UN regulation		 65 00 S6 SPECIAL WARNING LIGHTS *Summary is not available, because this item is out of focus at WP29.
S6/C1
10 Agreement
regarding UN regulation		 66 01 S1 STRENGTH OF SUPER STRUCTURE(LARGE PASSENGER VEHICLE) Extent of application shall be changed.
11 Agreement
regarding UN regulation		 74 01 S5 INSTALLATION OF LIGHTS (MOPED) *Summary is not available, because this item is out of focus at WP29.
12 Agreement
regarding UN regulation		 77 00 S12 PARKING LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
13 Agreement
regarding UN regulation		 87 00 S13 DAYTIME RUNNING LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
14 Agreement
regarding UN regulation		 91 00 S11 SIDE-MARKER LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
15 Agreement
regarding UN regulation		 98 00 S10 GAS-DISCHARGE HEADLAMPS 1.Approval symbol for the lamp in which main beam and passing beam are provided by the same light source.
2.Lighting cycle for heat resistance test
3. Definition that a lighting device for the left side and the corresponding device for the right side shall be considered to be of the same type, number of test samples and clarification of colorimetric characteristics.
16 Agreement
regarding UN regulation		 112 00 S9 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Definition that a lighting device for the left side and the corresponding device for the right side shall be considered to be of the same type, number of test samples and clarification of colorimetric characteristics.
17 Agreement
regarding UN regulation		 113 00 S7 HEADLAMPS (WITH A SYMMETRICAL PASSING BEAM) 1.Definition that a lighting device for the left side and the corresponding device for the right side shall be considered to be of the same type, number of test samples and clarification of colorimetric characteristics.
2.The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
3.Clarification of bulbs to be used for light distribution test.
4.Clarification that, in case of headlamps using more than one bulb, the minimum luminous flux requirements for passing beam shall be deemed to be satisfied, if the total flux meets them.
18 Agreement
regarding UN regulation		 116 00 S2 PROTECTION AGAINST UNAUTHORIZED USE Addition of system which locks brakes as one of devices to prevent unauthorized use.
19 Agreement
regarding UN regulation		 119 00 S3 CORNERING LAMPS 1.Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
2.The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
20 Agreement
regarding UN regulation		 121 00 S2 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS,TELL-TALES AND INDICATORS 1.The alarming symbol for brake system malfunction may be used for antilock brake system malfunction, too.
2.Depending upon the conditions of relevant functions, different colours shall be applied for indicators of engine coolant temperature and electrical charging level.
21 Agreement
regarding UN regulation		 123 00 S2 AFS Clarification of the definition regarding colorimetric characteristics.
PAGETOP

Table of amended regulations (Jan. 2009).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 4 00 S14 REAR REGISTRATION PLATE LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
2 Agreement
regarding UN regulation		 6 01 S17 DIRECTION INDICATORS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
3 Agreement
regarding UN regulation		 7 02 S14 FRONT AND REAR POSITION(SIDE)LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
4 Agreement
regarding UN regulation		 13-H 00 S6 BRAKING (M1) 1. A partial revision of alarming requirements in case that EPB（Electric Parking Brake) fails.
2.Addition of a list of required information items for approval of "replacement brake lining" according to R90.
5 Agreement
regarding UN regulation		 18 03 S2 PROTECTION AGAINST UNAUTHORIZED USE Addition of brake locking device as an anti-theft device.
6 Agreement
regarding UN regulation		 19 03   FRONT FOG LAMPS A new beam area (Class F3) with partially changed luminous intensities for front fog lamp was added so that more than one piece/unit of filament bulb, discharge bulb as well as LED module may be used.
03 S1 The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
03 C1 1. A revision regarding the lighting mode during heat resistance test.
2. Test voltage for LED module(s).
02 - The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
03 S1 The definition described in R48 shall be applied to the colorimetric characteristics of emitted light.
7 Agreement
regarding UN regulation		 58 02 - REAR UNDERRUN PROTECTION Test requirements for RUPD (Rear Underrun Protection Devices) shall be strengthened
Structural requirements for RUPD consisting of separate elements mounted in vehicles with a platform lift at the rear shall be revised.
8 Agreement
regarding UN regulation		 87 00 S12 DAYTIME RUNNING LAMPS Prescription of reference to the latest R37 when applying lamps for approval.
9 Agreement
regarding UN regulation		 91 00 S10 SIDE-MARKER LAMPS Prescription of reference to the latest R37 when applying lamps for approval.
PAGETOP

Table of amended regulations (Dec. 2008).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 10 03 - UNIFORM PROVISIONS CONCERNING THE APPROVAL OF VEHICLES WITH REGARD TO ELECTROMAGNETIC COMPATIBILITY Strengthening the regulation in accordance with EEC Directive.
- Enrichment of vehicle test items.
- Enrichment of components test items as well as addition of immunity to conducted noises and emission.
- Revision of test specifications for 2 wheeled vehicles.
2 Agreement
regarding UN regulation		 13 11 R6/
Erratum		 BRAKING Error correction.
3 Agreement
regarding UN regulation		 16 04 S19/C1 SAFETY BELTS Error correction in the corridor diagram for dynamic test.
4 Agreement
regarding UN regulation		 23 00 S14 REVERSING LAMPS - Prescription of reference to the latest R37 when applying lamps for approval.
5 Agreement
regarding UN regulation		 41 00 R1/C1 NOISE (MOTOR CYCLE) Error correction in the reference number to ISO.
6 Agreement
regarding UN regulation		 53 01 S8 INSTALLATION OF LIGHTS(MOTOR CYCLE) Additional prescription of installing Category 2 of R50 to the regulation for rear registration-plate illuminating devices. Adjusting the definition of "a single lamp" with that of R48.
7 Agreement
regarding UN regulation		 77 00 S11 PARKINGLAMPS - Prescription of reference to the latest R37 when applying lamps for approval.
8 Agreement
regarding UN regulation		 83 05 S6/C1 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS Error correction.
9 Agreement
regarding UN regulation		 117 01 C2 THE APPROVAL OF TYRES WITH REGARD TO ROLLING SOUND EMISSIONS Error correction.
PAGETOP
 

Table of amended regulations (Nov. 2008).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 13 11   BRAKING Addition of provisions regarding the side slip prevention device for heavy duty vehicles.
R6/
Erratum		 Error correction.
2 Agreement
regarding UN regulation		 48 03 S2/C1 INSTALLATION OF LIGHTS Error correction.
Adopted
proposal
regarding
UN regulation.		 04 C1 Error correction.
04 S1/C1 Error correction.
Agreement
regarding UN regulation		 03 S4 - Addition of provisions for aiming and levelling according to adoption of the new front fog lamp.
- Addition of requirements for automatic levelling as well as head lamp cleaner according to admission of the LED head lamp.
- Indirect vision devices such as cameras and service-door lighting systems of busses shall not be comprised in the extreme outer edge of a vehicle.
- Provision excluding white conspicuity markings from the prohibition of direct visibility towards the rear against white light.
- Admission of adding 2 front and rear end-outline markers.
- A revision to allow lighting cornering lamps on both sides simultaneously, when reverse lamp is switched on, etc.
Agreement
regarding UN regulation		 03 R5/
Erratum		 Error correction.
3 Adopted
proposal
regarding
UN regulation.		 83 05 S7 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS In addition to particulate mass measurement, particulate number measurement may be applied.
Adopted
proposal
regarding
UN regulation.		 05 S6/C1 Error correction.
4 Agreement
regarding UN regulation		 107 02 S1 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION Clarification of the definition of capacity for passengers in busses, including wheelchairs. .
Illuminating and switching requirements for service-door lighting of busses.
Operating requirements for service-doors and emergency doors.
5 Agreement
regarding UN regulation		 112 00 S8 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) - Prescription of reference to the latest R37 when applying lamps for approval.
- Addition of quality requirements regarding the "cut off" for facilitation of headlamp aiming.
- Addition of so-called "Dover-requirements", i.e., requirements of measures to prevent discomfort to users in a country where the traffic moves on a side of the road opposite to that of the country for which the headlamp was designed.
- Additional description of specification of LED modules.
- Addition of durability test on switching devices of beam as well as bending functions.
PAGETOP
 

Table of amended regulations (Oct. 2008).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding
UN regulation		 4 00 S13 REAR REGISTRATION PLATE LAMPS Prescription of reference to the latest R37 for application of lamp for approval.
2 Agreement
regarding
UN regulation		 6 01 S16 DIRECTION INDICATORS Prescription of reference to the latest R37 for application of lamps for approval.
3 Agreement
regarding
UN regulation		 7 02 S13 FRONT AND REAR POSITION(SIDE) LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Prescription of reference to the latest R37 for application of lamps for approval.
4 Agreement
regarding
UN regulation		 38 00 S13 REAR FOG LAMPS Prescription of reference to the latest R37 for application of lamps for approval.
5 Agreement
regarding
UN regulation		 46 02 S2 REAR-VIEW MIRRORS Addition of rules on camera/monitor device.
6 Agreement
regarding
UN regulation		 50 00 S11 LIGHTS (MOPED, MOTOR CYCLE) Prescription of reference to the latest R37 for application of lamps for approval.
7 Agreement
regarding
UN regulation		 98 00 S9 GAS-DISCHARGE HEADLAMPS 1. Prescription of reference to the latest R37 for application of lamps for approval.
2.Addition of quality requirements regarding the "cut off" for facilitation of headlamp aiming.
3. Addition of so-called "Dover-requirements", i.e., requirements of measures to prevent discomfort to users in a country where the traffic moves on a side of the road opposite to that of the country for which the headlamp was designed.
4.Addition of durability test on switching devices of beam as well as bending function.
8 Agreement
regarding
UN regulation		 104 00 S5 RETRO-REFLECTIVE MARKINGS FOR HEAVY AND LONG VEHICLES Deletion of a paragraph with a table concerning the chromaticity standard.
9 Agreement
regarding
UN regulation		 110 00 S7 VEHICLES USING CNG 1. Addition of requirements regarding application of stainless steel to those for gas cylinder materials.
2. Proposal to extend the regulation to include requirements for steel metal liners of seamless or welded construction.
3. Additional prescription of requirements for impact and bending properties as well as welding examination to Annex 1, referring to relevant test methods of ISO.
10 Agreement
regarding
UN regulation		 113 00 S6 HEADLAMPS (WITH A SYMMETRICAL PASSING BEAM) 1. Prescription of reference to the latest R37 for application of lamps for approval.
2. Addition of durability test on switching devices of beam as well as bending function.
11 Agreement
regarding
UN regulation		 115 00 S3 LPG/CNG RETROFIT SYSTEM 1. Proposals regarding methods of support and location of containers.
2. Additional description of measures against slipping of installed containers.
12 Agreement
regarding
UN regulation		 119 00 S2 CORNERING LAMPS Prescription of reference to the latest R37 for application of lamps for approval.
13 Adopted
proposal
regarding
UN regulation.		 123 00 S3 AFS A revision to enable usage of LED modules.
Agreement
regarding
UN regulation		 00 S1 Prescription of reference to the latest R37 for application of lamps for approval.
PAGETOP

Table of amended regulations (Sep. 2008).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 13 10 S4 BRAKING 1. Deletion of M1 category from R13.
2. A partial revision of requirements for a case of defective EPB（Electric Parking Brake).
3. A partial revision of lighting requirements when automatically commanded brake is in service.
4. Application of a unified value for gravitational acceleration.
5. Clarification of bedding in procedure of the brake system for trailers.
6. Error correction.
7. In order to remove the contradiction with regard to ADR existing between R105 and Annex 5 of R13, the latter shall be revised: Paragraph 1 shall be corrected and Paragraph 2.4 as well as Paragraph 2.4.1 shall be added.
Adopted
proposal
regarding
UN regulation.
10 S5 Strengthening the lamping requirements regarding vehicles equipped with endurance braking system, and revision of warning requirements for EPB.
2 Adopted
proposal
regarding
UN regulation.		 14 06 S4 SAFETY BELT ANCHORAGES Changing requirements for the static test on ISOFIX
3 Adopted
proposal
regarding
UN regulation.		 16 04 S19/C1 SAFETY BELTS Error correction in the corridor diagram for dynamic test.
05 S1 Revision of the test method on webbing.
4 Adopted
proposal
regarding
UN regulation.		 41 00 R1/C1 NOISE (MOTOR CYCLE) Error correction regarding the reference number to ISO.
5 Agreement
regarding UN regulation		 44 04 S1 CHILD RESTRAINT SYSTEMS 1. Addition of requirements regarding characteristics of test devices.
2. Clear description of standards cited from ISO.
3. Clarification of items to be measured.
4. Error correction in the above item.
5 Addition of definition of guide strap.
6. Changing the calibration method, and others.
7. A revision to prohibit children younger than, or as old as 18 years old from using the safety belt for adults.
8. Error correction regarding the ISOFIX child restraint system of semi-universal category.
S1
C1
S2
S3
S4
S4/C1
6 Agreement
regarding UN regulation		 64 01 C1 TEMPORARY-USE SPARE WHEELS/TYRES AND RUN FLAT TYRES 1. Addition of a rule concerning run-flat warning requirements for vehicles equipped with run flat tyres.
2. Error correction.
7 Adopted
proposal
regarding
UN regulation.		 65 00 S6/C1 SPECIAL WARNING LIGHTS This item is out of the scope of WP29.
8 Adopted
proposal
regarding
UN regulation.		 78 03 S1 BRAKING (CATEGORY L) Prescription of peak braking coefficient (PBC) as well as revision of conditions on anti-lock systems.
9 Adopted
proposal
regarding
UN regulation.		 117 01 C1 THE APPROVAL OF TYRES WITH REGARD TO ROLLING SOUND EMISSIONS Error correction.
PAGETOP

Table of amended regulations (Aug. 2008).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
Name #
1 Agreement
regarding UN regulation		 13H 00 S5 BRAKING (M1) 1. Addition of allowance for approval of N1 category.
2. Facilitation of regular inspection added.
3. Revision of requirements in case of defective EPB (Electric Parking Brake).
4. Partial revision of lighting requirements when automatically commanded brake is in service.
5. Application of a unified value for gravitational acceleration.
6. Error correction.
Adopted
proposal
regarding
UN regulation.		 00 S6 1. Partial revision of warning requirements for the case ＥＰＢ(Electric Parking Brake) fails.
2. Addition of a list of vehicle data for the purpose of Regulation No. 90"Replacement brake lining" approvals.
2 Agreement
regarding UN regulation		 16 05 C2 SAFETY BELTS Error correction regarding the scope of safety belt reminder.
3 Agreement
regarding UN regulation		 36 03 S12 CONSTRUCTION OF PUBLIC SERVICE VEHICLES 1. Provisional regulation for the phase of replacing Regulation No. 36 with Regulation No. 107.
2. Error correction.
4 Adopted
proposal
regarding
UN regulation.		 49 05   DIESEL EMISSION Adjustment with Gtr4(WHDC) and Gtr5(OBD).
1. Durability of after processing device.
2.Conformity of in-service vehicle engine.
3. OBD.
4. Assurance of control method of NOx.
  Adjustment with Gtr4(WHDC) and Gtr5(OBD).
1. Durability of after processing device.
2.Conformity of in-service vehicle engine.
3. OBD.
4. Assurance of control method of NOx.
  Adjustment with Gtr4(WHDC) and Gtr5(OBD).
1. Durability of after processing device.
2.Conformity of in-service vehicle engine.
3. OBD.
4. Assurance of control method of NOx.
5 Agreement
regarding UN regulation		 78 03 C1 BRAKING (CATEGORY L) Error correction.
6 Agreement
regarding UN regulation		 89 00 C1 SPEED LIMITATION DEVICES Error correction.
7 Agreement
regarding UN regulation		 90 01 R1
/C1		 REPLACEMENT BRAKE LINING ASSEMBLIES Error correction.
8 Agreement
regarding UN regulation		 98 00 S5
/C1		 GAS-DISCHARGE HEADLAMPS 1. Revision regarding the lighting mode during the thermal resistance test.
2. Voltage for measuring LED module, etc.
9 Agreement
regarding UN regulation		 104 00 S3
/C1		 RETRO-REFLECTIVE MARKINGS FOR HEAVY AND LONG VEHICLES Vehicle washing test.
10 Agreement
regarding UN regulation		 108 00 C2 RETREADED PNEUMATIC TYRE (MOTOR VEHICLE) Adjustment with Regulation No. 30 regarding the duration time of high speed test on the tyre with speed symbol "Y".
11 Agreement
regarding UN regulation		 112 00 S5
/C1		 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Revision regarding the lighting mode during the thermal resistance test.
12 Agreement
regarding UN regulation		 123 00 C1 AFS 1. Revision regarding the lighting mode during the thermal resistance test.
2. One set of samples of the system, for which the approval is sought, is required for the test.
PAGETOP

Table of amended regulations (Jul. 2008).



* S: Amendment number, C: Error correction number.

  Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 6 01 S15 DIRECTION INDICATORS Admission of automatically variable intensity control within the prescribed extent of the regulation according to the change of surrounding circumstances.
Adopted
proposal
regarding
UN regulation.		 01 S17 Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
2 Agreement
regarding UN regulation		 16 04 S19 SAFETY BELTS Addition of acceleration sled test method.
05 C1 Correction of errors in the scope of safety belt reminders.
3 Agreement
regarding UN regulation		 37 03 S29 FILAMENT LAMPS Adjustment with R19.
4 Agreement
regarding UN regulation		 51 02 S6 NOISE Revision of the supplementary materials to Annex 3 of R51 (Measuring method of the exhaust noise near the outlet).
5 Agreement
regarding UN regulation		 67 01 S8 SPECIFIC EQUIPMENT OF VEHICLE USING LPG The endurance test method of pressure gauge and vaporizer has been made uniform with ISO, by means that the endurance test requirement of 50,000 cycles has been prescribed in Annex 15, Paragraph 9.
6 Agreement
regarding UN regulation		 75 00 S12 PNEUMATIC TYRES (MOPED, MOTOR CYCLE) Change of the scope.
7 Agreement
regarding UN regulation		 87 00 S11 DAYTIME RUNNING LAMPS Prescription of reference to the latest R37 at the time of applying lamps for type approval.
8  Agreement
regarding UN regulation		 125 00 S1 THE FORWARD FIELD OF VISION A newly introduced regulation.
PAGETOP

Table of amended regulations (Jun. 2008).



* S: Amendment number, C: Error correction number.

   Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name #
1 Agreement
regarding UN regulation		 4 00 S10
/C2		 REAR REGISTRATION PLATE LAMPS Revision regarding the definition of "the same type".
Adopted
proposal
regarding
UN regulation.		 00 S14 Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
2 Adopted
proposal
regarding
UN regulation.		 5 02 S7 SEALED BEAM HEADLAMPS The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
3 Adopted
proposal
regarding
UN regulation.		 7 02 S14 FRONT AND REAR POSITION (SIDE) LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
4 Adopted
proposal
regarding
UN regulation.		 16 05 C2 SAFETY BELTS Correction of errors in the scope of safety belt reminders.
Correction of errors in the scope of safety belt reminders.
5 Adopted
proposal
regarding
UN regulation.		 18 03 S2 PROTECTION AGAINST UNAUTHORIZED USE Addition of brake locking system as a protective device.
6 Adopted
proposal
regarding
UN regulation.		 19 02 S14 FRONT FOG LAMPS The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
03 S1 The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
C1 -Revision regarding the lighting mode in the heat resistance test.
-Prescription of voltages for the measurement on LED modules, etc.
7 Adopted
proposal
regarding
UN regulation.		 23 00 S15 REVERSING LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
8 Adopted
proposal
regarding
UN regulation.		 31 02 S7 HALOGEN SEALED BEAM HEADLAMPS The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
9 Adopted
proposal
regarding
UN regulation.		 37 03 S31 FILAMENT LAMPS - Adoption of a halogen bulb H15.
- The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
10 Adopted
proposal
regarding
UN regulation.		 38 00 S14 REAR FOG LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
11 Adopted
proposal
regarding
UN regulation.		 46 02 S3 REAR-VIEW MIRRORS - Definition of surveillance camera-monitor-recording device.
- Requirements for fitting a vehicle with a camera.
12 Adopted
proposal
regarding
UN regulation.		 48 04 S1 INSTALLATION OF LIGHTS Addition of definitions regarding the chromaticity areas as well as overall vehicle length.
04 S1
/C1		 Correction of errors.
13 Adopted
proposal
regarding
UN regulation.		 50 00 S12 LIGHTS (MOPED, MOTOR CYCLE) Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
14 Adopted
proposal
regarding
UN regulation.		 53 01 S9 INSTALLATION OF LIGHTS (MOTOR CYCLE) The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
15 Adopted
proposal
regarding
UN regulation.		 65 00 S6 SPECIAL WARNING LIGHTS (Summary is not available, because this item is out of the scope of our tracing.)
16 Adopted
proposal
regarding
UN regulation.		 66 01 S1 STRENGTH OF SUPER STRUCTURE (LARGE PASSENGER VEHICLE) Change of application extent.
17 Adopted
proposal
regarding
UN regulation.		 70 01 S6 REAR MARKING PLATES FOR HEAVY AND LONG VEHICLES Addition of requirements regarding the washing test.
18 Adopted
proposal
regarding
UN regulation.		 74 01 S5 INSTALLATION OF LIGHTS (MOPED) (Summary is not available, because this item is out of the scope of our tracing.)
19 Adopted
proposal
regarding
UN regulation.		 77 00 S12 PARKING LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
20 Adopted
proposal
regarding
UN regulation.		 78 03 C1 BRAKING (CATEGORY L) Correction of errors.
21 Adopted
proposal
regarding
UN regulation.		 87 00 S13 DAYTIME RUNNING LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
22 Adopted
proposal
regarding
UN regulation.		 89 00 C1 SPEED LIMITATION DEVICES Correction of errors.
23 Adopted
proposal
regarding
UN regulation.		 90 01 S10 REPLACEMENT BRAKE LINING ASSEMBLIES Correction of prescriptions about the vehicle which represents the vehicle type as well as correction of an error.
01 R1
/C1		 Correction of errors.
24 Adopted
proposal
regarding
UN regulation.		 91 00 S11 SIDE-MARKER LAMPS Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
25 Adopted
proposal
regarding
UN regulation.		 98 00 S10 GAS-DISCHARGE HEADLAMPS - Approval marking for a lamp which uses the same light source for emitting Hi/Low beams.
- Lighting cycle during the heat resistance test.
- Clear definition of the sameness, test samples and colour.
00 S5
/C1		 Revision regarding the lighting mode in the heat resistance test.
00 S8
/C1		 Error correction.
26 Adopted
proposal
regarding
UN regulation.		 99 00 S4 GAS-DISCHARGE LIGHT SOURCES The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
27 Adopted
proposal
regarding
UN regulation.		 104 00 S3
/C1		 RETRO-REFLECTIVE MARKINGS FOR HEAVY AND LONG VEHICLES Error correction and addition of tolerance to solution flow rate regarding the high pressure washing test.
Agreement
regarding UN regulation		 S4
/C1		 Error correction.
28 Adopted
proposal
regarding
UN regulation.		 107 02 S2 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION Addition of rules regarding opening and closing of emergency doors.
29 Adopted
proposal
regarding
UN regulation.		 108 00 C2 RETREADED PNEUMATIC TYRE (MOTOR VEHICLE) Adjustment of the duration of high speed test on tyres with speed symbol "Y" with that of R30.
30 Adopted
proposal
regarding
UN regulation.		 112 00 S9 HEADLAMPS (WITH AN ASYMMETRICAL PASSING BEAM) Clear definition of the sameness, test samples and colour.
00 S5
/C1		 Revision regarding the lighting mode in the heat resistance test.
00 S8
/C1		 Error correction.
00 S8
/C1		 Error correction.
31 Adopted
proposal
regarding
UN regulation.		 113 00 S7 HEADLAMPS (WITH A SYMMETRICAL PASSING BEAM) - Clear definition of the sameness, test samples and colour.
- The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
- Clarification of filament lamps to be used for the luminous flux check.
- In case of headlamps using more than one filament lamp, it shall be acceptable that the minimum luminous flux requirements are met by the total luminous flux of those lamps.
32 Adopted
proposal
regarding
UN regulation.		 116 02 S3 PROTECTION AGAINST UNAUTHORIZED USE Addition of brake locking system as a protective device.
33 Adopted
proposal
regarding
UN regulation.		 119 00 S3 CORNERING LAMPS - Requirements for marking of specific identification code, exclusion of interchangeability in the same lamp housing, requirement of devices for removing lamps, etc. regarding light source modules with different characteristics.
- The definitions of the colour of the light emitted given in R48 and its series of amendments shall apply to this Regulation.
34 Adopted
proposal
regarding
UN regulation.		 121 00 S2 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS, TELL-TALES AND INDICATORS - Even for the case ABS fails, the brake warning symbol shall be used.
- For warning indicators of cooling water, charging, tyre pressure, tyre position different light colours shall be used, depending upon the status of each function.
35 Adopted
proposal
regarding
UN regulation.		 123 00 S2 AFS Clear definition of colour.
00 C1 - Revision regarding the lighting mode in the heat resistance test.
- One set of test samples shall be provided for one system.
PAGETOP

Table of amended regulations (May 2008).



* S: Amendment number, C: Error correction number.

  
 Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name
#
1 Agreement
regarding UN regulation		 43 00 S10
/C1		 GLAZING MATERIALS A revision to allow manufacturers to request either of the two test areas defined in the regulation for N1vehicles.
2 Agreement
regarding UN regulation		 46 02 S1 REAR-VIEW MIRRORS
  1. Addition of a method to correct the ocular point.
  2. Revision concerning categories to apply provisions to.
  3. Revision of requirements for fitting mirrors of IV and V classes to motor vehicles of category N2 not exceeding 7.5t.
  4. Revision of requirements regarding fitting and obscuration for interior mirrors of class I.
  5. Revision of extent to apply visibility requirements for exterior mirrors to.
  6. Error correction.
3 Agreement
regarding UN regulation		 52 01 S9 CONSTRUCTION OF SMALL CAPACITY PUBLIC SERVICE VEHICLES
  1. Transitional provisions during replacement phase of R36 with R107.
  2. Error correction.
4 Agreement
regarding UN regulation		 83 05 R3
/C1		 THE EMISSION OF POLLUTANTS ACCORDING TO ENGINE FUEL REQUIREMENTS Error correction.
5 Agreement
regarding UN regulation		 94 01 C2 PROTECTION OF THE OCCUPANTS IN THE EVENT OF A FRONTAL COLLISION Clarification of head performance criterion.
6 Agreement
regarding UN regulation		 95 02 S1
/C1		 PROTECTION OF THE OCCUPANTS IN THE EVENT OF A LATERAL COLLISION Error correction in the requirements regarding approval of dummies.
PAGETOP

Table of amended regulations (April 2008).



* S: Amendment number, C: Error correction number.

  
 Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name
#
1 Agreement
regarding
UN regulation		 7 02 S12
/C1		 FRONT AND REAR POSITION (SIDE) LAMPS, STOP LAMPS AND END-OUTLINE MARKER LAMPS Error correction.
2 Adopted
proposal
regarding
UN regulation.		 10 03   Electro-magnetic compatibility
  • Fostering the regulation according to EEC Directive.
  • Enrichment of vehicle test items.
  • Enrichment of component test items as well as addition of immunity to conducted noise and emissions.
  • Amendment of test specifications regarding two-wheeled vehicles.
3 Adopted
proposal
regarding
UN regulation.		 13 11   Heavy vehicles braking Addition of rules regarding a device to prevent vehicles from skidding for heavy duty vehicles.
4 Agreement
regarding
UN regulation		 18 03 S1 PROTECTION AGAINST UNAUTHORIZED USE Amendment of application extent.
5 Agreement
regarding
UN regulation		 19 02 S11
/C1		 FRONT FOG LAMPS Error correction.
6 Agreement
regarding
UN regulation		 30 02 S15 PNEUMATIC TYRES (PASSENGER VEHICLE) Amendment regarding markings, sizes and amendment of an annex for tyres,
7 Agreement
regarding
UN regulation		 37 03 S25
/C1		 FILAMENT LAMPS Error correction.
S27
/C1		 Error correction.
8 Agreement
regarding
UN regulation		 43 00 S10 GLAZING MATERIALS Amendment of an annex.
9 Agreement
regarding
UN regulation		 73 00 S1 LATERAL PROTECTION (GOODS VEHICLE) regarding the extent of application, type approval and conformity of manufacturing procedures.
10 Agreement
regarding
UN regulation		 90 01 S9 REPLACEMENT BRAKE LINING ASSEMBLIES Ａｍｅｎｄｍｅｎｔ of an annex regarding type approval.
11 Adopted
proposal
regarding
UN regulation.		 107 02 S1 CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION
  • Clarification of definition of the space, etc. for wheelchairs in a bus.
  • Lighting requirements for service door lightings of a bus.
  • Requirements regarding opening and closing of service doors and emergency doors.
  • Clarification of definition of the space, etc. for wheelchairs in a bus.
  • Lighting requirements for service door lightings of a bus.
  • Requirements regarding opening and closing of service doors and emergency doors.
12 Agreement
regarding
UN regulation		 107 02 - CATEGORY M2 OR M3 VEHICLES WITH REGARD TO THEIR GENERAL CONSTRUCTION
  • Definition of a trolleybus and technical requirements for it.
  • Foot space in front of passenger seats.
  • Device to prevent a vehicle from being driven away from rest when a door is not fully closed.
  • Number of service doors and emergency exits as well as requirements for them.
  • Strength requirements for steps.
  • Access requirements for service doors and emergency exits.
  • Measurement requirements for seats.
  • Assurance of driver's view for a vehicle without a roof.
  • Amendment proposals regarding pictogram and steps.
13 Agreement
regarding
UN regulation		 109 00 S4 RETREADED PNEUMATIC TYRE (COMMERCIAL VEHICLE) Amendment regarding type approval and requirements as well as amendment of an annex.
14 Agreement
regarding
UN regulation		 121 00 S1 THE LOCATION AND IDENTIFICATION OF HAND CONTROLS, TELL-TALES AND INDICATORS Amendment of specifications and a table.
15 Agreement
regarding
UN regulation		 125 00   THE FORWARD FIELD OF VISION A newly introduced regulation.
16 Agreement
regarding
UN regulation		 126 00 - PARTITIONING SYSTEM A newly introduced regulation.
PAGETOP

Table of amended regulations (March 2008).



* S: Amendment number, C: Error correction number.

  
 Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name
#
1
Adopted
proposal
regarding
UN regulation.
4
00
S10/C2
 Illumination of rear registration plates Revising the meaning of "different types".
00
S13
 Description of reference to the latest R37 at the time of applying lamps for type approval.
2
Adopted
proposal
regarding
UN regulation.
37
00
S30
 Filament lamps Admission of halogen bulbs.
(*The amendment number in a document is S29.)
3
Adopted
proposal
regarding
UN regulation.
43
03
S11
 Safety glazing A revision for allowing manufacturers to choose one of two named test areas for N1 vehicles.
4
Adopted
proposal
regarding
UN regulation.
46
02
S2
 Devices for indirect vision Addition of rules on camera monitor systems.
5
Adopted
proposal
regarding
UN regulation.
48
03
S4
 Installation of lights and light-signalling devices
  • According to the introduction of new front fog lamps, rules regarding their aiming and leveling have been added.
  • According to the admission of LED headlamps, requirements for leveling by device and headlamp cleaners have been added.
  • Devices for indirect vision such as cameras and service door lighting systems should be excluded from parts deciding the extreme outer edge.
  • Ex\emption of white conspicuity markings from prohibition against visibility of white light towards the rear.
  • Addition of 2 front and rear end outline markers is permitted.
  • Cornering lamps for backward movement on the right and left sides are permitted, etc.
03
S4/C1
  • According to the introduction of new front fog lamps, rules regarding their aiming and leveling have been added.
  • According to the admission of LED headlamps, requirements for leveling by device and headlamp cleaners have been added.
  • Devices for indirect vision such as cameras and service door lighting systems should be excluded from parts deciding the extreme outer edge.
  • Exemption of white conspicuity markings from prohibition against visibility of white light towards the rear.
  • Addition of 2 front and rear end outline markers is permitted.
  • Cornering lamps for backward movement on the right and left sides are permitted, etc.
04
  
  • Deletion of class A from R112.
  • Presence of daytime running lamp is made mandatory. However, the Contracting Parties not applying R87may prohibit the presence of DRL.
04
  
  • Deletion of class A from R112.
  • Presence of daytime running lamp is made mandatory. However, the Contracting Parties not applying R87may prohibit the presence of DRL.
03
S2/C1
 Correction of errors.
6
Adopted
proposal
regarding
UN regulation.
64
01
C1
 Temporary use spare wheels/tyres Correction of errors.
7
Agreement
regarding
UN regulation
78
03
Erratum
 Braking (Category L) Correction of errors.
8
Adopted
proposal
regarding
UN regulation.
83
05
R3/C3
 Emissions of M 1 and N 1 categories of vehicles Correction of errors.
9
Adopted
proposal
regarding
UN regulation.
87
00
  
 Daytime running lamps Prescription of reference to the latest R37 at the time of applying lamps for type approval.
10
Adopted
proposal
regarding
UN regulation.
115
00
S3
 Specific LPG and CNG retrofit systems
  • Proposals regarding methods of support and location of containers.
  • Additional description of measures against slipping of installed containers.
Agreement
regarding
UN regulation
amend 2 / Erratum
 Correction of an error.
PAGETOP

Table of amended regulations (February 2008).



* S: Amendment number, C: Error correction number.

  
 Document
reference		 Status of
document *		 Title Description
(To see the original document, click the text.)
Name
#
1 Adopted
proposal
regarding
UN regulation.		 6 01 S16 Direction indicators
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
2 Adopted
proposal
regarding
UN regulation.		 7 02 S13 Front and rear position lamps, stop lamps and end-outline marker lamps
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
3 Adopted
proposal
regarding
UN regulation.		 16 05 C1 Safety-belts
  • Correction of errors in the communication form.
4 Adopted
proposal
regarding
UN regulation.		 19 02 S13 Front fog lamps
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
03  
  • Addition of a new beam pattern for front fog lamps of Class F3, enabling usage of more than one filament bulbs, discharge bulbs, and LED modules.
5 Adopted
proposal
regarding
UN regulation.		 23 00 S14 Reversing lights
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
6 Adopted
proposal
regarding
UN regulation.		 38 00 S13 Rear fog lamps
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
7 Adopted
proposal
regarding
UN regulation.		 44 04 S4/C1 Child restraint systems
  • Correction of errors regarding ISOFIX child restraint systems for quasi-general purpose use.
8 Adopted
proposal
regarding
UN regulation.		 50 00 S11 Front/rear position/stop-lamps, direction indicator, rear registration plate lamps (mopeds/motorcycles
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
9 Adopted
proposal
regarding
UN regulation.		 53 01 S8 Installation of lighting and light-signalling devices (motorcycles)
  • Additional prescription of fitting R50 Category 2 to the regulation for license plate lamps. Adjusting the definition of the single lamp with R48.
10 Adopted
proposal
regarding
UN regulation.		 58 02   Rear underrun protection
  • Intensifying the strength test of rear underrun protection devices.
  • Revision of the regulation regarding the structural requirements for the rear bumper consisting of separated elements for vehicles with a platform lift at the rear.
11 Adopted
proposal
regarding
UN regulation.		 77 00 S11 Parking lamps
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
12 Adopted
proposal
regarding
UN regulation.		 91 00 S10 Side-marker lamps
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
13 Adopted
proposal
regarding
UN regulation.		 94 01 C1 Frontal collision
  • Clarification of the description regarding the HEAD PERFORMANCE CRITERION.
14 Adopted
proposal
regarding
UN regulation.		 95 02 S1/C1 Lateral collision
  • Correction of errors in the requirements for the authorization test of dummies.
15 Adopted
proposal
regarding
UN regulation.		 98 00 S9 Headlamps with gas-discharge light sources
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
  • Addition of lightness requirements on the "cut off" line, in order to facilitate aiming of headlamps..
  • Addition of "Dover-requirements" (requirements of illumination configuration for different traffic positions).
  • Addition of durability tests on switching devices for beams as well as bending functions.
16 Adopted
proposal
regarding
UN regulation.		 104 00 S4/C1 Retro-reflective markings
  • Correction of errors.
00 S5
  • Deletion of a paragraph as well as a table regarding the chromaticity requirements in the daylight.
17 Adopted
proposal
regarding
UN regulation.		 112 00 S8 Headlamps emitting an asymmetrical passing beam
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
  • Addition of lightness requirements on the "cut off" line, in order to facilitate aiming of headlamps..
  • Addition of "Dover-requirements" (requirements of illumination configuration for different traffic positions).
  • Addition of usage of LED.
  • Addition of durability tests on switching devices for beams as well as bending functions.
18 Adopted
proposal
regarding
UN regulation.		 113 00 S6 Headlamps emitting a symmetrical passing beam
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
  • Addition of durability tests on switching devices for beams as well as bending functions.
19 Adopted
proposal
regarding
UN regulation.		 119 00 S2 Cornering lamps
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
20 Adopted
proposal
regarding
UN regulation.		 123 00 S1 AFS
  • Prescription of conformity to the latest R37 at the time of applying lamps to type approval.
PAGETOP
source: MarkLines Co., Ltd. Copyright(C)MarkLines Co., Ltd. All rights reserved.