Cooper-Standard Holdings Inc.
[库博标准控股]

公司概要

■URL

https://www.cooperstandard.com

■总部所在地

40300 Traditions Drive, Northville, Michigan 48168, USA

业务内容

-美国知名汽车密封系统(Sealing Systems)和流体处理系统(Fluid handling systems)供应商,流体处理系统包括燃油和制动输送系统以及流体传输系统

-轻型车市场销售额占比约达94%(2023年度(截至2023年12月))。

-市场占有率方面,密封系统位居全球首位,燃油和制动输送系统位居全球第2,流体传输系统位居全球第3(2023年度(截至2023年12月),该公司发布)。


竞争企业

密封系统 燃油和制动输送系统 流体传输系统
-Henniges
-HSR&A
-哈金森

-建新
-SaarGummi
-Standard Profil
-丰田合成
-Martinrea
-Maruyasu工业
-三樱工业
-TI Fluid Systems
-SeAH

-Akwel
-康迪泰克
-Fraenkische
-哈金森
-Teklas
-Tristone

资本构成

-在纽约证券交易所上市

主要产品

密封系统(挡风雨条) (Sealing systems)
-使用轻质高性能静态密封材料Fortrex的产品 (Fortrex static seal material which provides higher performance at lower weight)

  • 车窗玻璃导槽系统 (Glass run systems)
  • 低腰线挤出成型 (Below waist extrusions)
  • 内密封条 (Inner belts)
  • 外密封条 (Outer belts)

-动态密封条 (Dynamic seals)

  • 车门密封条 (On-door seals)
  • 车身密封条 (On-body seals)
  • 升降门和后备厢盖密封条 (Liftgate and deck lid seals)
  • 发动机盖密封条 (Hood seals)
  • 边沿防护密封条 (Margin seals)
  • 摇臂密封条 (Rocker seals)
  • 天窗密封条 (Sunroof seals)
  • 敞篷车顶密封条 (Convertible top seals)

-静态密封 (Static seals)

  • 车窗导槽密封条 (Glass runs)
  • 外密封条 (Outer belts)
  • 内密封条 (Inner belts)
  • 皮带下方通道 (Below belt channels)
  • 嵌花材料 (Appliques)
  • 顶盖饰条成型 (Roof ditch moldings)

-玻璃密封材料 (Encapsulated glass)
-内置接近/触觉传感器的SafeSeal系统 (SafeSeal system with integrated proximity or tactile sensing)
-不锈钢装饰 (Stainless steel trim)
-装饰箔 (Decorative foils)
-聚碳酸酯硬质涂层装饰 (Polycarbonate hardcoat trim)
-齐平玻璃系统,用于消除玻璃和密封材料之间的间隙 (Flush glass systems, that eliminates the gap between the glass and applique)
-可变挤压密封件和薄膜 (Variable extrusion seals and films)
-Texa-Fib (Tex-A-Fib cost-efficient textile surface design)
-2K外腰带 (2K outer waist belts to form complex contours for aesthetic value)
-天然纤维材料密封
件 (Agrifiber environmental seals)
-无框门密封系统 (Frameless door sealing systems)
-障碍物检测系统 (Obstacle detection system)

燃油和制动输送系统 (Fuel and brake delivery systems)
-燃油及蒸汽管 (Fuel and vapor lines)
-金属制动管和线束 (Metallic brake lines and bundles)
-燃油和制动管混合线束 (Combined fuel and brake line bundles)
-燃油箱配管 (Tank lines)
-油管及燃油加注口总成 (Fuel rails and fuel charging assemblies)
-直喷油轨 (Direct injection and port fuel rails)
-燃油系统用快速连接器 (Quick Connect fuel system connectors)
-带传感器的燃油系统用快速连接器 (Quick Connect fuel system connectors with integrated sensors)
-第三代Posi-Lock双锁快速连接器 (Third-generation Posi-Lock double-lock quick connector)
-高可靠性制动管用MagAlloy材料 (MagAlloy material for brake lines with increased durablity)
-具有耐热性、低聚物性能及低渗透性的PA9T多层管 (PA9T multi-layer tube with increased temprature resistance, low oligomers performance and low permeation)
-底盘和油箱燃油管束 (Chassis and tank fuel lines and bundles)
-低聚物多层波纹管 (Low oligomer multi-layer convoluted tube)
-制动缓冲管 (Brake jounce lines)
-ArmorTube制动管涂层 (ArmorTube brake tube coating)
-300系列与S300LT(低温)快速连接器 (Series 300 and S300LT (low temperature) quick connects)


流体传输系统 (Fluid transfer systems)
-加热和冷却软管 (Heater and coolant hoses)
-ArmorHose耐磨软管 (ArmorHose abrasive resistant material)
-DPF管 (Diesel particulate filter (DPF) lines)
-SCR管 (Selective catalytic reduction (SCR) lines)
-变速箱油冷却软管 (Transmission oil cooling hoses)
-排气口罐 (Degas tanks)
-进气充气软管 (Air intake and charge hoses)
-涡轮增压器软管 (Turbocharger hoses)
-二次空气软管 (Secondary air hoses)
-刹车离合器软管 (Brake and clutch hoses)
-流体系统用快速连接器 (Quick Connect fluid system connectors)
-增压空气冷却器 (Charged air cooling)
-用于乙二醇热管理的多层管 (Multilayer tubing for glycol thermal management)

-管道/总成增压空气冷却器 (Charged air cooler ducts/assemblies)
-二次空气软管 (Secondary air hoses)
-Easy-Lock快速连接器 (Easy-Lock quick connect)
-Easy-Lock VDA快速连接器 (Ergo-Lock VDA quick connect)
-PlastiCool 5000高温多层管 (MLT) (PlastiCool 5000 high temperature multi-layer tubing (MLT))
-用于乙二醇热管理的PlastiCool 2000 MLT (PlastiCool 2000 MLT for glycol thermal management)

    公司历程

    1914年 公司创立。
    1930年 公司名为Master Tire & Rubber Corp。1946年7月后改用现在的公司名。
    1986年 收购墨西哥的内胎制造公司。
    1997年03月 收购英国公司Avon Rubber plc下的轮胎部。
    1999年01月 收购Dean Tire & Rubber Company。
    1999年10月 收购The Standard Products Company。公司主要由Cooper Tire 和Cooper-Standard Automotive两大业务部组成。
    2000年01月 收购Siebe Automotive 。
    2000年06月 出售Holm Industries。
    2001年07月 收购Hercules下的轮胎再生业务部。
    2004年07月 与中国的Wuhu Saiyang Sealing Products Company Limited签订合同,在中国成立汽车车身密封件产销公司“Cooper Saiyang Wuhu Automotive”。
    2004年12月 从Cooper Tire & Rubber Company处收购其汽车配件业务部Cooper-Standard Automotive。
    2005年07月 从墨西哥The Gates Corporation处收购其汽车软管制造业务部。
    2005年 取得Guyoung Technology Co., Ltd 20%的股份。
    2006年 与中国大型管道供应商Jingda公司签订两份合同。
    2006年02月 从ITT Industries处收购其在北美、欧洲和中国的15处流体处理系统业务部。
    2007年03月 从Automotive Components Holding处收购油轨制造业务部。
    2007年08月 收购MAPS业务。
    2007年 取得合资公司SAIC-Metzeler Sealing Systems Co. Ltd. 47.5%的股份。上汽仍旧拥有47.5%的股份,余下5%由Shanghai Qinpu Zhaotun Collective Asset Management Company持有。
    2007年12月 取得印度密封件供应商MAP 74%的股份。
    2009年08月 本公司及在美国的子公司申请美联邦破产法第11条保护。
    2010年05月 脱离破产法适用范围。
    2011年03月 Ikuyo的子公司USi, Inc.被收购。
    2012年01月 从意大利整车厂Sigit S.p.A.收购汽车密封件业务。
    2012年04月 收购总部位于美国密西根州的EDC Automotive LLC。
    2013年07月 收购生产汽车用密封产品的Jyco Sealing Technologies。
    2014年07月 子公司Cooper-Standard Automotive的汽车热交换/排气相关产品业务出售给汉拿伟世通空调 (HVCC)
    2014年09月 华域汽车系统[Huayu Automotive Systems]同意公司追加收购与华域汽车系统的合资公司申雅密封件[Huayu-Cooper Standard Sealing Systems]的47.5%股份。
    2014年第4季度 收购与Fonds de Modernisation des Equipementiers Automobiles (FMEA) 的合资公司Cooper Standard France剩余49%股份。
    2014年第4季度 为将经营资源集中到核心4个部门业务,出售澳大利亚业务。
    2014年第4季度 收购西班牙加热和冷却软管制造商Cikautxo Borja, S.L.U。
    2015年2月 完成对华域汽车系统 [Huayu Automotive Systems] 持有的申雅密封件 [Huayu-Cooper Standard Sealing Systems] 股份的收购。由此,库博标准的持股比例达到95%。
    2016年8月 收购AMI Industries的北美汽车燃油·制动系统业务及关联公司。
    2018年1月 收购AMI Industries的中国汽车燃油·制动系统业务。
    2018年5月 收购韩国LS Mtron制动软管、动力转向管、充气冷却器软管等汽车零部件业务的80.1%股份。
    2018年7月 同意收购Lauren ManufacturingLauren Plastics,该公司从事工业和特殊汽车密封用途的有机、硅、热塑性、工程聚合物产品的挤出机和成型机。
    2018年11月 与大陆达成协议,向大陆出售防业务。
    2018年12月 宣布在美国密歇根州Northville新设总部
    2019年4月 完成以约2.655亿美元向大陆出售防振系统业务。
    2020年07月 将欧洲流体输送、特殊密封件业务和印度业务出售给Mutares SE & Co. KGaA
    2023年 出售所持亚太地区合资业务全部控股股权。
    2023年08月 将技术橡胶业务出售给瑞士霍尔希姆。

    补充 1